What type of engine oil is suitable for the Ford Kuga 1.5T?
1 Answers
The original engine oil specification for the Ford Kuga 1.5T is 5W-20. For later maintenance and oil changes, you can choose alternatives such as Liqui Moly Leichtlauf AA-0W-20, Shell PurePlus 0W-20, Castrol Edge 5W-30, Shell Helix Ultra SN-5W-30, or Mobil 1 5W-30. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The second number represents the oil's kinematic viscosity at 100°C. A higher number indicates better ability to maintain viscosity at high temperatures, which can be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Ford Kuga 1.5T is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain. Use a special wrench to remove the oil filter. Apply some oil to the seal of the new oil filter and tighten it clockwise by hand. Pour the new oil into the engine through the oil filler cap on the valve cover, typically filling up to three-quarters of the oil container. Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If there are leaks, they should be repaired. After stopping the engine, pull out the dipstick to check that the engine oil level is within the standard range.
