···
Log in / Register

What type of engine oil is suitable for the Buick Excelle?

3 Answers
LeDonovan
08/28/25 8:04am
The original engine oil for the Buick Excelle 1.4T is Mobil 1 5W-30 full synthetic oil, while the Buick Excelle 1.5L uses the factory-recommended 5W-30 semi-synthetic oil, with a filling capacity of approximately 3.7L. The meaning of the engine oil model and selection methods are as follows: Meaning of 5W-30: The engine oil model 5W-30 indicates that W stands for WINTER, meaning it is suitable for winter use. The number 5 before the W represents the viscosity at low temperatures. The smaller the number, the better the fluidity at low temperatures and the stronger the cold resistance. The number 30 refers to the viscosity at 100 degrees Celsius. The larger the number, the higher the viscosity and the stronger the high-temperature resistance. Methods for selecting engine oil grades: Choose based on your needs, while also considering factors such as the vehicle's driving environment and the owner's driving habits. If you frequently drive in congested areas or your vehicle is older, you may consider using engine oil with higher viscosity to better protect the engine. Naturally aspirated engines have lower requirements for oil performance and can use mineral oil or semi-synthetic oil. Turbocharged engines are more precise than naturally aspirated engines and operate under harsher conditions, requiring higher-performance oil with better fluidity. Full synthetic oil is the best choice.
Was this review help?
8
4
Share
OLeila
09/10/25 6:12am
I often help friends with car repairs. The oil type for the Buick Excelle depends on the specific year and engine. For newer models after 2015, like the 1.3T or 1.5L, 0W-20 full synthetic oil is generally recommended. This oil is thinner, provides faster cold starts, saves fuel, and protects the engine. For older models, such as those before 2010, 5W-30 might be more suitable because it has higher viscosity and is better for high-temperature environments. Don't forget to check the owner's manual—it clearly specifies the oil type. Using the wrong type can accelerate engine wear and increase fuel consumption. It's recommended to change the oil every 5,000 to 8,000 kilometers, opting for reputable brands like Mobil or Shell, and avoiding cheap alternatives. In areas with significant temperature variations, use 0W series in winter for antifreeze protection and 5W in summer for heat resistance, ensuring smoother driving.
Was this review help?
10
2
Share
Expand All
MacHarmony
10/24/25 7:02am
I've been driving a Buick Excelle for several years, using 0W-20 engine oil, and I feel the engine responds quickly with low fuel consumption. Choosing the oil type is actually quite simple: the new car manual specifies 0W-20, so I've stuck with it. Fully synthetic oil is more expensive but lasts longer. For older cars, switching to 5W-30 might be better as it offers stronger leak protection. I recommend not experimenting with other types randomly, as it can lead to increased engine noise and higher repair costs. For regular maintenance, I change the oil every six months and replace the oil filter, keeping the car running as smoothly as new. Temperature plays a big role—0W-20 starts up faster in cold northern winters, while 5W-30 is more stable in the hot south. When selecting oil, look for API certification, SN or SP grade is sufficient.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What Brand is Baodiao Motorcycle?

Baodiao Motorcycle is produced by Jiangsu Baodiao Motor Vehicle Co., Ltd., a state-certified manufacturer of motorcycles and electric vehicles. Below is relevant information about Jiangsu Baodiao Motor Vehicle Co., Ltd.: 1. Introduction to Jiangsu Baodiao Motor Vehicle Co., Ltd.: The company was registered on October 27, 2000, with the Xishan District Market Supervision and Administration Bureau in Wuxi City. Its business scope includes motorcycles, power-assisted bicycles, electric vehicles, engines and their accessories, as well as agricultural and forestry machinery. 2. Disadvantages of Jiangsu Baodiao Motor Vehicle Co., Ltd.: Essentially, this company lacks independent R&D capabilities. The models it produces are primarily low-tech, low-value-added, and low-priced products, targeting the mass-market vehicle sector. Its products are mainly sold in rural areas and underdeveloped regions in Asia, Africa, and Latin America.
9
3
Share

How to Connect Bluetooth in an Older Model Van?

In older model vehicles, Bluetooth can typically be activated through the central control screen. Alternatively, check the dashboard for any of the following symbols: Bluetooth logo, "BlueTooth," or "BT." If present, pressing it will enable Bluetooth. Below is an introduction to the car Bluetooth system: 1. Overview of Car Bluetooth System: The Bluetooth technology in car systems is an extension of mobile phone Bluetooth technology, sharing the same transmission system. Car Bluetooth is an in-vehicle wireless hands-free system designed based on wireless Bluetooth technology. 2. Functions of Car Bluetooth System: Its primary function is to connect with a mobile phone via Bluetooth for hands-free calls while driving, freeing up the driver's hands and reducing the risk of traffic accidents. Most current car Bluetooth systems support features like conference calls and MP3 playback, with simple operation and the ability to connect multiple phones simultaneously, significantly enhancing driving safety.
18
4
Share

Why does the car air conditioner not cool when driving on the highway?

Introduction to the reasons why the car air conditioner does not cool when driving on the highway: 1. Reason one: Lack of refrigerant. Car air conditioners generally need to add refrigerant every 2~3 years. 2. Reason two: Damaged air conditioner flap. The failure of the air conditioner flap motor is relatively rare. The flap motor is usually located in the lower middle part of the instrument panel and serves as the main switch for the air conditioner vents. 3. Reason three: The condenser is too dirty. The purpose of cleaning the radiator and condenser is mainly for heat dissipation. If spring willow catkins and poplar catkins accumulate on the condenser, it can cause phenomena such as excessive engine temperature or poor air conditioning performance. 4. Reason four: Damage to the air conditioner compressor, throttle valve, or expansion valve. Malfunctions in the expansion valve and throttle valve directly lead to poor air conditioning performance. These checks are relatively complicated and require professional repair shops for repairs.
8
3
Share

What is the fuel consumption of the Jinjila?

Fuel consumption is calculated by dividing the amount of fuel added by the distance traveled. Here are the relevant details: 1. Calculating fuel consumption: The first method involves using the vehicle's dashboard records. After resetting the mileage data, the onboard computer automatically calculates the vehicle's fuel consumption based on the recorded mileage and fuel consumption data. The second method involves recording the distance traveled after a single refueling and then calculating the vehicle's fuel consumption. The fuel consumption obtained by both methods represents the average fuel consumption of the vehicle. 2. Trip fuel consumption: Trip fuel consumption is obtained by integrating the instantaneous fuel consumption to get the total fuel consumed during the trip, then dividing it by the trip distance. As for the trip distance, it can be simply obtained by integrating the vehicle speed or by setting a variable to record the trip distance, which updates along with the odometer.
8
1
Share

What are the vehicle parking management regulations?

Here is the relevant introduction about vehicle parking management regulations: 1. Each property management office shall carry out management work for vehicles within the managed property project area in accordance with laws and regulations: For those requiring vehicle storage fees, they are responsible for collecting the fees according to the pricing department's regulations. 2. Each property management office should be familiar with the vehicle flow and parking space situation in the community (building): Reasonably arrange and prioritize the use of parking spaces for property owners. They are responsible for directing vehicle movement and parking within the area, maintaining traffic and parking order in the community (building). 3. Motor vehicles driving within the area: The speed shall not exceed 15 kilometers per hour, and honking, test driving, repairing, or practicing driving are prohibited. Parking is not allowed on sidewalks, roadways, or fire lanes.
20
1
Share

Does installing the license plate with a nut spacer have any impact?

No impact. Here are the relevant details: 1. Function of the nut: The primary purpose of the license plate nut is to secure the license plate. Unlike regular screws, the ones used for license plates are anti-theft screws. Once installed, these screws cannot be unscrewed. The only way to remove the license plate is by destroying the anti-theft screw. This measure is designed to prevent vehicle owners from changing their license plates without authorization. 2. Identification on the nut: Each license plate nut has a small identification mark on its top. This mark corresponds to the jurisdiction where your vehicle was registered. For example, if your license plate starts with "Yue A," then the mark on the nut should also be "Yue A." If these marks do not match, you may face corresponding penalties.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.