What type of engine oil is suitable for Citroen C5?

What is the fuel consumption of the manual Arrizo 5 in liters?

The manual Arrizo 5 has a fuel consumption of 7.66 liters per 100 kilometers. Below are the factors affecting fuel consumption and tips for saving fuel: Factors affecting car fuel consumption: Potholes on the road will increase fuel consumption. Driving for a long time in low gear will inevitably increase fuel consumption. Overloading the trunk with heavy items will also increase fuel consumption. Incorrect driving habits can double or even triple fuel consumption. Driving at high speeds in low gear will increase fuel consumption. Neglecting engine maintenance will also increase fuel consumption. Issues with the engine ignition system, such as inaccurate ignition timing, leaking high-voltage wires, or spark plug carbon buildup causing weak ignition, can reduce engine combustion efficiency and increase fuel consumption. Tips for saving fuel: When starting the vehicle, use a low gear and gently press the accelerator to gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. A gentle start not only shortens the engine warm-up time but also effectively improves fuel utilization, thereby achieving fuel-saving effects.

6

3

Share

Is Running a Red Light Captured from Behind?

It is determined by capturing three photos with electronic cameras. The first photo shows the vehicle crossing the stop line at the intersection, including the red light signal and license plate number; the second photo shows the vehicle completely crossing the stop line, including the red light signal and license plate number; the third photo shows the vehicle continuing to move, mainly by comparing the position change of the vehicle in the second photo, including the red light signal and license plate number. Capturing these three photos can determine that the vehicle has run a red light. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. The following points can help avoid running a red light: First, look at the arrow light, then the circular light: Currently, there are two types of indicator lights: arrow traffic lights and circular indicator traffic lights. When arrow lights are present, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are allowed; when encountering an arrow signal light with a red right-turn arrow, right turns are prohibited, otherwise, it will be penalized as running a red light. Brake in time: When the red light turns on, do not let the front of the vehicle cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light; if the front wheels have just crossed the stop line when the light turns red, passage through the intersection is prohibited, and you must wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, judge accordingly; if there is no countdown, and the vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to untimely braking; if the speed is slow and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may pass if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to special vehicles: Yielding to ambulances, fire trucks, and other special vehicles. If captured by surveillance cameras while yielding to special vehicles, the act of running a red light will not be recorded during manual review. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights. The photos capturing the violation may be blurry, and if you accidentally run a red light, the traffic police will not impose penalties. Emergency situations: Transporting a critically ill patient to the hospital may involve running multiple red lights, and 12 points may not be enough. After delivering the patient, the citizen can provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation record can be cleared. If possible, it is best to call an ambulance to avoid traffic accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of the traffic police. The traffic police department states that according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," when the yellow light flashes at an intersection, vehicles that have already crossed the stop line may continue to pass. If the yellow light is already on and you still rush to pass, it will be considered running a red light if captured.

17

2

Share

What causes the engine light to come on after an oil change?

When the engine warning light comes on after an oil change, you should first check the coolant temperature gauge and oil pressure warning light. If the coolant temperature gauge and oil pressure warning light are not activated (the needle-type coolant temperature gauge should read around 95 degrees), the car can still be driven, but you must pay attention to controlling the speed and drive to a repair shop for inspection promptly. Reasons for the engine warning light to illuminate: Poor combustion of air-fuel mixture: Issues such as faulty engine spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines can all lead to poor combustion of the air-fuel mixture. Poor combustion can cause engine carbon buildup or knocking, which is monitored by the engine's oxygen sensor. The warning light will illuminate after the issue is transmitted to the electronic control unit (ECU) as an alert. Sensor problems: These include sensors for coolant temperature, crankshaft position, air flow, intake temperature, oxygen levels, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, causing the engine warning light to come on. You should promptly take the car to a repair shop for inspection and repairs. Oil quality issues: The fuel added to the car usually has a specific rating, and engine oil can be categorized as semi-synthetic or fully synthetic. Manufacturers typically recommend the fuel rating and type of engine oil that owners should use. If the owner does not add the required specifications, long-term engine wear can occur, leading to the warning light illuminating. Carbon buildup issues: After a certain period of use, some carbon deposits will inevitably accumulate inside the engine. This can alter the engine's design parameters, and since carbon deposits are thermally unstable, heat accumulation can cause erratic engine ignition, leading to engine knocking. In such cases, the engine warning light will illuminate.

16

1

Share

Replace the Wiper Blades or the Entire Wiper Assembly?

Generally, it is the wiper blades that need replacement. Below is some information about car wipers: Tips for Proper Wiper Usage: Temperature changes, gravel, dust, and other factors can shorten the lifespan of wiper blades. Regularly cleaning dirt off the windshield and wiper blades, especially after rain, can reduce unnecessary wear and prolong the life of the blades. Functions of Wipers: Helping the vehicle maintain a safe distance from the centerline on the left side of the road, assisting the driver in determining the position of the left wheels, aiding in judging the position of the right wheels, assisting in estimating the distance between the right side of the vehicle and the roadside, facilitating parallel parking, and removing raindrops and dust from the vehicle's windshield.

5

2

Share

What is the fuel consumption of the WEY VV6?

WEY VV6 has a fuel consumption of 9.42-12.14 liters per 100 kilometers. The following are the factors affecting fuel consumption and tips for saving fuel: Factors affecting car fuel consumption: Potholes on the road will increase fuel consumption. Driving for a long time in low gear will inevitably increase fuel consumption. Overloading the trunk will also increase fuel consumption. Incorrect driving can increase fuel consumption by 2 to 3 times. Driving at high speed in low gear will increase fuel consumption. Lack of engine maintenance will increase fuel consumption. Issues with the engine ignition system, such as inaccurate ignition timing, leaking high-voltage wires, or spark plug carbon deposits causing weak ignition, will reduce engine combustion efficiency and increase fuel consumption. Tips for saving fuel: When starting the vehicle, use a low gear and gently press the accelerator to gradually increase speed. Avoid suddenly pressing the accelerator hard, as this will multiply fuel consumption. Starting by gently pressing the accelerator can shorten the engine warm-up time and effectively improve fuel utilization, thereby achieving fuel-saving effects.

4

3

Share

What are the consequences of not paying car insurance on time?

Different types of car insurance have different impacts. The following are the consequences: 1. Fines if caught and the need to renew insurance before driving. Compulsory traffic insurance is mandatory by the state, and driving without it is prohibited. If caught without it, you will be fined double the premium and must purchase it before continuing to drive. 2. Self-responsibility for accidents. Once the policy expires, it becomes invalid. Without compulsory traffic insurance, you will not be compensated in the event of a traffic accident. 3. Loss of discount eligibility. Compulsory traffic insurance adjusts the next year's premium based on the number of at-fault accidents in the previous year or cumulatively. If not renewed on time, the accumulated years without traffic accidents will be reset to zero.

10

4

Share

What type of engine oil is suitable for Citroen C5?

What is the fuel consumption of the manual Arrizo 5 in liters?

Is Running a Red Light Captured from Behind?

What causes the engine light to come on after an oil change?

Replace the Wiper Blades or the Entire Wiper Assembly?

What is the fuel consumption of the WEY VV6?

What are the consequences of not paying car insurance on time?

What documents are required for registering an imported vehicle?

When will the Highlander meet the China 6 emission standard?

What are the contents of Driving Test Subject 3?

Should You Supervise the First Maintenance?