What type of engine oil is recommended for the MG ZS?

What Causes Excessive Engine Oil Consumption?

Reasons for excessive engine oil consumption: First, the oil pan is damaged, causing oil leakage. Second, the oil enters the combustion chamber and participates in combustion. The faults leading to excessive engine oil consumption are as follows: 1. Poor sealing at engine body joints, resulting in oil leakage from the lubrication system. Solution: Replace various sealing gaskets or oil seals based on the leakage location to ensure proper sealing. 2. Excessive oil level in the oil pan. In this case, excess lubricating oil is carried into the combustion chamber and burned, causing excessive oil consumption. Solution: Drain the excess oil to maintain the oil level within the standard range. 3. Excessive oil in the air filter. In a wet-type air filter, too much oil can be diluted under hot conditions and easily carried into the combustion chamber by high-speed airflow, leading to excessive oil consumption. Solution: Pour out the excess oil. 4. Damaged, stuck, or broken piston rings that fail to scrape oil effectively. Normally, oil splashed by the rotating crankshaft to lubricate the cylinder walls is scraped back into the oil pan by the piston rings. When piston rings are worn, stuck, or broken, their oil-scraping performance declines or fails, allowing oil to enter the combustion chamber and burn, increasing oil consumption. Solution: Replace all piston rings with new ones.

19

1

Share

What does HUD stand for?

HUD stands for Head-Up Display, a flight assistance instrument used in aircraft. It refers to a driver-centered, blind-operation, multi-functional instrument panel. Its function is to project important driving information such as speed and navigation onto the windshield in front of the driver, allowing the driver to see critical driving information like speed and navigation without having to lower or turn their head. More related information is as follows: 1. The head-up display first appeared in military aircraft, reducing the frequency with which pilots needed to look down at instruments, avoiding attention interruptions and loss of situational awareness. Due to the convenience of HUD and its ability to improve flight safety, civil aircraft have also followed suit in installing it. Cars have also begun to be equipped with HUD. 2. HUD utilizes the principle of optical reflection to project important flight-related information onto a piece of glass. This glass is located at the front of the cockpit, roughly at eye level with the pilot. The projected text and images are adjusted to a focal distance of infinity, allowing the pilot to easily integrate the external view with the data displayed by the HUD when looking forward through it. The design intent of HUD is to enable pilots to maintain a heads-up posture without needing to look down at instrument displays and data, reducing the risk of missing rapid changes in the external environment during the transition between looking down and up, as well as the delay and discomfort caused by constantly adjusting eye focus.

3

4

Share

What Does Engine Oil Model Number Mean?

Engine oil model numbers consist of two parts: classification and viscosity specifications. The oil model number typically indicates viscosity and quality. Detailed explanation: The viscosity of lubricating oil is often identified using SAE grades, where SAE stands for the Society of Automotive Engineers. More detailed information is as follows: 1. On the outer packaging of engine oil, you will often see SAE and API. SAE is the abbreviation for the Society of Automotive Engineers, and API stands for the American Petroleum Institute. The number following SAE indicates the oil's viscosity value, while the number following API indicates the oil's quality grade. 2. 10W-40 is its SAE standard viscosity value. This viscosity value first indicates that the oil is a multi-grade lubricant. The 'W' stands for WINTER, and the number before the W represents the pour point temperature, simply put, the freezing point temperature. 10W oil corresponds to a freezing point temperature of -25°C, while other common grades include 0W at -35°C, 5W at -30°C, and 15W at -20°C. The number after the W represents the oil's kinematic viscosity at 100°C, with higher numbers indicating higher viscosity. 40 means the kinematic viscosity standard at 100°C is between 12.5mm2/s and 16.3mm2/s, and it absolutely does not mean, as some folk interpretations suggest, that it can be used below 40°C. It's important to know that engine operating temperature is not necessarily determined by ambient temperature; prolonged high-RPM driving can easily raise engine temperature to 100°C, yet there are no lubricants with a 100 rating.

16

1

Share

Why does the car shake severely when just started?

If severe shaking is noticed after starting the car, it indicates an abnormal condition in the vehicle. It is important to stop and inspect promptly to avoid more serious hazards. Below are solutions for severe shaking when the car is just started: 1. Carbon buildup in the engine is unavoidable during operation, but excessive carbon deposits can lead to poor engine performance and various malfunctions. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. This makes starting difficult until the carbon deposits become saturated with gasoline, making it easier to start. After starting, the gasoline adsorbed on the carbon deposits is sucked into the cylinders by the engine's vacuum force for combustion, enriching the air-fuel mixture. The fluctuating lean and rich air-fuel mixture causes idle shaking after a cold start. Solution: Clean the fuel system and inspect the idle control valve for carbon buildup, which should be cleaned if necessary. 2. For vehicles with 3 cylinders or fewer, shaking is mostly normal, as 3-cylinder engines inherently shake more severely. For vehicles with 4 cylinders or more, if the shaking is worse than usual, inspect the engine bay for any abnormalities, such as a cylinder not working or multiple cylinders performing poorly. Common symptoms include excessively large spark plug gaps or loose spark plugs, which can cause shaking. In such cases, stop the vehicle and carefully inspect the spark plugs for integrity. If tools are available, remove the spark plugs for inspection. Other issues like poor fuel supply or inadequate lubrication may also cause shaking. If unable to resolve these issues, promptly visit a repair shop. 3. Sometimes, insufficient tire pressure or balance issues can cause the vehicle to shake. In such cases, carefully check the tire pressure and look for any abnormal tire wear.

4

1

Share

What happens if you cross the opposite yellow line after making a left turn?

Crossing the opposite yellow line after making a left turn is considered a traffic violation. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," it will result in a deduction of 3 points. Under the "Road Traffic Safety Law," a fine of 200 yuan will be imposed. The violation can be confirmed, but whether there will be a penalty depends on whether the camera captures it. If the sensor line is not crossed, no photo will be taken. Even if the sensor line is crossed, it may be difficult to capture a clear image due to angle issues. Generally, as long as it is not dangerous and does not affect others' passage, it is not a problem. However, in some stricter cities, penalties may be imposed. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the scoring criteria for road traffic safety violations, Article 3: If a motor vehicle driver commits any of the following violations, 3 points will be deducted at once: (6) Driving a motor vehicle on a highway or urban expressway without following the designated lane; (7) Driving a motor vehicle through a crosswalk without slowing down, stopping, or yielding to pedestrians as required; (8) Driving a motor vehicle in violation of prohibition signs or no-entry line instructions; (9) Driving a motor vehicle without following the rules for overtaking or yielding, or driving in the opposite direction. Article 90 of the "Road Traffic Safety Law": If a motor vehicle driver violates road traffic safety laws or regulations regarding road passage rules, a warning or a fine of 20 to 200 yuan will be imposed. If there are other provisions in this law, penalties will be imposed accordingly.

13

4

Share

What Does the Exclamation Mark Mean on a BMW?

An exclamation mark appearing on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, braking system fault light, transmission fault indicator, and windshield wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside indicates a general performance or component and function fault in the car. Common issues include parking sensor faults, fuel cutoff system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or that the transmission lubricant is below the normal range. The transmission fluid should be replaced promptly. Braking System Fault: A circle with parentheses and an exclamation mark in the middle represents a braking system warning, mainly indicating a fault in the braking system or low brake fluid levels. The braking system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses and an exclamation mark below represents the tire pressure monitoring warning light. This light will illuminate when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a fault in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible or perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are divided into two colors—yellow and red—to indicate different levels of severity: Yellow indicates a fault in the corresponding system, but the issue is not very severe. Reduce speed and proceed to the nearest repair point to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. If this occurs, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable risks to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect and eliminate safety hazards.

5

2

Share

What type of engine oil is recommended for the MG ZS?

What Causes Excessive Engine Oil Consumption?

What does HUD stand for?

What Does Engine Oil Model Number Mean?

Why does the car shake severely when just started?

What happens if you cross the opposite yellow line after making a left turn?

What Does the Exclamation Mark Mean on a BMW?

What documents are required for motorcycles to refuel at gas stations?

What are the signs that a car needs an oil change?

What is the normal oil pressure for a car?

Where is the start button for the Q5?