What type of engine oil is recommended for the Honda Jade?

1 Answers
RicardoDella
07/30/25 10:17am
The manufacturer recommends using 0W-20 or 5W-20 engine oil. If opting for maintenance outside authorized dealerships, Idemitsu 0W-20 full synthetic oil is a suitable alternative. Below are key features of the Honda Jade: 1. Exterior Design: The Honda Jade combines the sporty and dynamic styling of a performance sedan with the spaciousness expected from a family-oriented touring vehicle. Its versatile 5-seat configuration adapts to diverse usage scenarios while maintaining high practicality. Additionally, it is equipped with a powerful engine paired with either an automatic or CVT transmission, ensuring exceptional driving convenience. 2. Body Structure: The Honda Jade features a redesigned front bumper with enhanced sporty aesthetics. Its side profile benefits from dual character lines, eliminating visual monotony. Darkened B-pillars, C-pillars, and D-pillars create a floating roof effect. The rear section exhibits pronounced dynamism through its layered design, complemented by a roof spoiler and rear bumper that amplify the vehicle's athletic character. The tailgate's aerodynamic contours and prominent spoiler significantly elevate the sporty appeal.
Was this review help?
14
1
Share
More Forum Discussions

How to Open the Fuel Filler Cap on a Hyundai?

The fuel filler cap button for Hyundai vehicles is located under the driver's seat, marked with a fuel tank icon. Pull it outward to open the fuel filler cap. The fuel filler cap of a car consists of an inner cap and an outer cap. The inner cap is typically a screw-type, where turning it to the right tightens the cap and turning it to the left loosens it. Here are some precautions to note when refueling your car: 1. Choose a reputable gas station for refueling. 2. Try to refuel during early morning or late evening hours. 3. Be cautious when purchasing bulk gasoline. 4. Avoid refueling during thunderstorms. 5. In winter, especially at self-service gas stations, it's advisable to discharge static electricity from your body before refueling.
20
3
Share

What engines are used in the Golf?

Golf uses a total of 4 engines, which are a 1.6-liter naturally aspirated engine with a maximum horsepower of 110 hp, a 1.2-liter turbocharged engine with a maximum horsepower of 116 hp, a 1.4-liter turbocharged engine with a maximum horsepower of 150 hp, and a 2.0-liter turbocharged engine with a maximum horsepower of 220 hp. Golf is a classic hatchback compact family car launched by FAW-Volkswagen. The front face incorporates the "X" main design element, paired with new fog light styling, making the front look more dynamic and three-dimensional. The chrome trim on the grille runs through the brand logo and integrates with the daytime running lights, extending the visual effect. The rear lines are more streamlined, and the taillights feature a new matrix LED design, along with sequential rear turn signals, complemented by continuous chrome dual exhaust pipes and new 17-inch ten-spoke alloy wheels.
10
3
Share

What is the manufacturer of NIO cars?

The manufacturer of NIO cars is the Jianghuai-NIO factory. Here is some relevant information about NIO cars: 1. NIO is a car under the NIO brand, a global intelligent electric vehicle brand registered in Shanghai, specializing in high-tech, intelligent, and electric vehicles. 2. NIO's lineup includes models such as the NIO ES8, NIO EVE, and NIO EP9. Among them, the NIO ES8 is a high-performance pure electric SUV, where 'E' stands for 'Electric', 'S' stands for 'SUV', and '8' represents the performance level. The NIO ES8 has a body size of 5022mm in length, 1962mm in width, 1756mm in height, and a wheelbase of 3010mm. 3. The NIO ES8 is built with an all-aluminum body and chassis, comes standard with active air suspension, and is equipped with dual motors front and rear, featuring four-wheel drive.
9
1
Share

How to Adjust the Headlight Height of the Lynk & Co 03?

The method to adjust the headlight height of the Lynk & Co 03: 1. There is a black plastic button on the far left side of the instrument panel near the door that can be rolled up and down. 2. Next to it, there are indicator lines from thick to thin; rolling the button up and down adjusts the height. 3. The higher the value, the higher the light beam, which may cause glare to oncoming drivers. Methods for adjusting headlight height: 1. 0th gear = Suitable when the front seats are occupied and the trunk is empty. 2. 1st gear = Suitable when the car is fully loaded with passengers and the trunk is empty. 3. 2nd gear = Suitable when the car is fully loaded with passengers and the trunk is fully loaded. 4. 3rd gear = Suitable when the car is fully loaded with passengers and the trunk is fully loaded.
5
3
Share

Where is the lower cross member of the Mazda 3 radiator located?

The lower cross member of the Mazda 3 radiator is located at the front lower part of the radiator. Here is more information about the radiator: 1. The function of the radiator is to protect the car from damage and keep the engine within the appropriate temperature range. 2. The car radiator consists of three parts: the inlet chamber, the outlet chamber, and the radiator core. The coolant flows inside the radiator core, while air passes outside the radiator. The hot coolant cools down as it dissipates heat to the air, and the cold air heats up by absorbing the heat from the coolant. The steps to remove the radiator are as follows: 1. Open the car's hood, remove the intake pipe located above the radiator fan, and then remove the radiator fan. 2. The radiator fan and the air conditioning fan are located on the fan frame, with four corners in total, each having a screw. 3. Use professional tools to unscrew these four screws. 4. Once all the screws are removed, you can take the radiator fan off the car.
12
1
Share

Does the 6-year exemption from inspection require an on-site inspection in the sixth year?

6-year exemption from inspection requires an on-site inspection in the sixth year. Vehicles registered after 2012 are eligible for two exemptions from on-site inspections. If a vehicle meets the exemption conditions, the exemption period starts from 2014, meaning that during the six years from 2014 to 2019, the vehicle can enjoy two exemptions from on-site inspections. It is not until 2019 that an on-site inspection is required, along with the application for the annual inspection sticker. In other words, the six-year exemption does not include the sixth year. Vehicle models eligible for the 6-year exemption policy include: non-operational large, small, and mini cars, as well as non-operational small and mini passenger vehicles. The non-operational vehicles mentioned in this measure do not include: police cars, fire trucks, ambulances, engineering rescue vehicles, converted from operational to non-operational, converted from taxis to non-operational, two-wheeled motorcycles, and three-wheeled motorcycles. Starting from November 20, 2020, non-operational small and mini passenger vehicles with 7 to 9 seats (excluding minivans) are included in the exemption scope.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.