What type of engine oil is recommended for the Geely Borui 1.8T?

2 Answers
LeLeo
07/28/25 3:49pm
For the Geely Borui 1.8T model, it is recommended to use fully synthetic engine oil. The relevant details are as follows: 1. Since the vehicle's engine is equipped with a turbocharger, the engine operates under high temperature and high-speed conditions when the turbocharger is working, thus requiring higher lubrication performance from the engine oil. 2. Fully synthetic engine oil provides excellent lubrication, which can extend the engine's service life. Additional information is as follows: 1. Fully synthetic engine oil is a high-grade product among engine oils. It is derived from ethylene and propylene dispersed from natural gas or crude oil gas, which then undergo polymerization, catalysis, and other complex chemical reactions to form a lubricating fluid composed of large molecules. 2. Essentially, it utilizes the superior components of crude oil, subjected to chemical reactions and controlled human intervention to achieve the desired molecular structure. 3. The molecules in fully synthetic oil are neatly arranged, giving it strong resistance to external changes. Therefore, it has superior properties, such as better thermal stability, oxidation resistance, and viscosity stability compared to mineral and semi-synthetic oils, which is why it is more expensive.
Was this review help?
2
5
Share
AlyssaAnn
08/11/25 11:02pm
I've been driving a Geely Borui 1.8T for over two years, always using 5W-30 full synthetic oil. The manual's recommendation is quite reliable. Turbocharged engines require better lubrication, and synthetic oil provides superior protection, ensuring smooth engine operation with less noise and even some fuel savings. You don't have to worry about viscosity issues during summer heat or traffic congestion. I use the Castrol Magnetec series, which meets the API SN standard and is of reliable quality. The recommended oil change interval is every 10,000 kilometers—don't delay too long to avoid sludge buildup. Remember to check the dipstick to ensure there's no oil shortage. If your driving style is aggressive, you might consider 5W-40 oil, which is slightly thicker for stronger protection, but 5W-30 is still the base recommendation. From an experienced driver's perspective, choosing genuine oil is crucial—don't skimp on small savings and risk engine damage.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

Where is the Yamaha oil drain port located?

The Yamaha motorcycle engine has two oil drain ports. The one at the bottom left side of the engine is more convenient for regular use. At the bottom right side of the engine, there is a larger plug that contains an oil filter screen. During routine maintenance, this can be removed to inspect and clean the oil filter screen. Generally, as long as qualified oil is replaced regularly, it won't get clogged, so frequent removal for cleaning isn't necessary. The position of the oil drain screw: The oil drain screw is located at the bottom of the oil pan. Since it's on the exterior, it's easily visible. This design helps in completely draining the oil and cleaning the oil pan. Yamaha motorcycle performance: This model is equipped with a single-cylinder, water-cooled SOHC-4 valve engine, delivering a maximum power of 11.3 kW (8000 rpm) and a maximum torque of 13.7 N·m (6500 rpm). It reduces friction and power loss, improves combustion efficiency, and enhances cooling performance, resulting in stronger acceleration, higher top speed, and lower fuel consumption.
8
1
Share

Should You Always Use the Air Recirculation Mode When Driving with Air Conditioning On?

If driving long distances, you should not keep the air recirculation mode on continuously, as this can lead to oxygen deprivation inside the vehicle, making the driver prone to drowsiness and compromising driving safety. Therefore, it is advisable to periodically switch to the fresh air mode to allow proper air exchange. Function of air recirculation mode: The primary purpose of the air recirculation mode is to block polluted air from entering the vehicle, ensuring clean air inside while preventing airflow circulation. Precautions for using air recirculation mode: During the first six months of a new car, it is essential to enhance ventilation, regularly clean the vehicle's air conditioning system, and strive to maintain fresh air inside the car. Special attention should be paid to avoiding the use of perfumes or air fresheners to mask unusual odors in the vehicle.
2
5
Share

Are Car Glass Codes the Same?

Car glass codes are not necessarily the same. It is quite common for the front and rear windshield codes to differ, as they belong to different types of glass, and the manufacturer's part numbers also vary. Generally, glass codes consist of a combination of symbols, numbers, and English letters, printed in the lower left corner of the glass. These codes include information such as the car brand, glass brand, certification marks, glass type, and production date. Below is an introduction to car glass: 1. Laminated Glass: High impact resistance. Upon impact, the brittle glass may shatter, but due to the combination of laminated glass and elastic PVB, it maintains high penetration resistance and visibility. 2. Tempered Glass: High strength. Tempered glass of the same thickness has 3-5 times the impact resistance and bending strength of regular glass.
16
3
Share

How much horsepower does the Honda CBR650 have?

Honda CBR650 has 39kw/13000rpm horsepower. Honda CBR650 engine: Inline four-cylinder four-stroke water-cooled. 650cc Front tire specification: 120/70-ZR17. Rear tire specification: 180/55-ZR17 Appearance style: Matte black with dark windshield, left and right sides equipped with dark gold EP crash protectors. Maximum torque/speed: 60/8000 (N.m/rpm). Maximum power/speed: 56/9000 (kW/rpm). Vehicle condition: Complete with original factory accessories, modified brake direct push master cylinder, RG crash protectors, RG tank anti-slip stickers, full body HP4 decals, modified rear hump, Puig racing windshield, full Akrapovic exhaust, lowered handlebar kit, modified raised footpegs, racing brake lever guards, front and rear genuine carbon fiber mudguards.
16
2
Share

Is it necessary to engage the electronic parking brake when parking on a flat surface?

It is not necessary to engage the electronic parking brake when parking on a flat surface. Steps for engaging the parking brake: turn off the engine, park the car, shift into P gear, and then engage the parking brake. The functions of P gear and the parking brake are completely different. P gear locks the transmission mechanism to prevent movement, while the parking brake applies braking force through a steel cable acting on the brakes. If you only shift into P gear without engaging the parking brake after parking, any accidental collision from front or rear vehicles can easily damage the transmission's locking mechanism or even directly harm the transmission. Additionally, what appears to be a flat surface when parking may actually have a slight slope. Therefore, parking with only P gear engaged and no parking brake protection is relatively unsafe. The reason for engaging the parking brake on a slope: if the driver parks on a slope with only P gear engaged and no parking brake, the excessive force may cause the transmission's locking mechanism to fail, resulting in a rollaway accident.
6
0
Share

How to eliminate the Haval lightcontrol?

The method to eliminate the Haval lightcontrol is as follows: 1. Use a data cable to connect the diagnostic computer to the vehicle's OBD interface; 2. Then use the diagnostic computer to detect the relevant fault codes; 3. Follow the fault information indicated by the fault codes to conduct a specific inspection of the vehicle's lighting system, and then address the issues accordingly. Additional information: Lightcontrol refers to a malfunction in the vehicle's lighting regulation system. It is necessary to turn on all the vehicle's lights to check which specific light is malfunctioning. Once the fault is identified, you can replace the light's fuse, change the bulb, inspect the lighting control switch, and check if there is any damage to the wiring.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.