···
Log in / Register

What type of engine oil is most suitable for the Honda City?

4 Answers
McMatteo
08/28/25 7:24am

Honda City is best suited for SM grade 5W-30 semi-synthetic engine oil, which is the officially recommended oil. However, owners can switch to different types of engine oil based on their needs, as long as the oil used is the same or of a higher grade. Different engines have different requirements for engine oil. Below are the oil requirements for two types of engines: 1. Naturally aspirated engine: Naturally aspirated engines have lower performance requirements for engine oil and can use mineral oil or semi-synthetic oil. If the budget allows, full synthetic oil can be used. 2. Turbocharged engine Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions. They require higher-grade lubricants with better fluidity, preferably full synthetic oil.

Was this review help?
17
3
Share
MiaAnn
09/10/25 5:38am

I've been driving a Honda City for many years and have gained plenty of experience in engine oil selection. The engine design leans towards precision, making 0W-20 full synthetic oil the most suitable choice. This viscosity offers both fuel efficiency and excellent protection, especially during winter when frequent cold starts occur. I've also tried 5W-20, which performs well in warmer seasons, but overall, 0W-20 provides a more balanced performance. When purchasing engine oil, opt for reputable brands like Shell or Castrol, ensuring they have API certification, and avoid unknown brands to prevent engine wear. The oil change interval should be every 8,000 to 10,000 kilometers, but if you frequently drive in congested urban areas, changing it a bit earlier is advisable. The key is to follow the manual and not overthink it. Although synthetic oil may cost more initially, fewer changes make it cost-effective in the long run, and the car runs much smoother, saving hassle over time. Pay extra attention to oil levels and filter cleanliness—these small details can extend your car's lifespan by several years.

Was this review help?
9
2
Share
Expand All
ZacharyLynn
10/24/25 6:29am

I used to drive a Honda City and figured out the engine oil stuff myself. The best fit is 0W-20 synthetic oil - quicker engine response and better fuel efficiency. I remember gaining dozens of kilometers per liter after switching. Semi-synthetic works okay, but full synthetic shows clear advantages, especially quieter starts. Don't overthink brands - common ones like Mobil or Shell are fine. Dealer-recommended OEM oil performs well but costs more; I saved significantly buying online later. Change intervals depend on mileage: advance to 7,000 km for city-heavy driving, extend to 10,000 km for highway use. Driving habits matter greatly - my gentle driving style paired with proper oil selection extends engine life. Pro tip: always check certification labels when purchasing to avoid counterfeits. Well-maintained cars hold their value better.

Was this review help?
16
2
Share
Expand All
JudeMarie
12/07/25 6:53am

In my opinion, the most suitable engine oil for the Honda City is 0W-20 or 5W-20 synthetic oil. This viscosity is designed to protect the engine and save fuel. Choose brands with API certification and change the oil regularly every 5,000 to 10,000 kilometers. Adjust according to the climate: 0W-20 is better for cold regions, while 5W-20 works fine in hot weather. Avoid trying other viscosities to prevent damage. Simply remember: follow the manual and choose reliable products.

Was this review help?
9
2
Share
Expand All
More Forum Discussions

How Long is the Lifespan of a Suzuki SX4 Engine?

Suzuki SX4 engine lifespan is 500,000 kilometers. Below are the specific details about the Suzuki SX4: 1. Vehicle Positioning: The Suzuki SX4 is a compact car under the Suzuki brand. 2. Powertrain: It is equipped with two engines: a 1.6-liter naturally aspirated engine and a 1.8-liter naturally aspirated engine. The 1.6-liter naturally aspirated engine has a maximum power output of 80 kW and a maximum torque of 144 Nm. This engine reaches its maximum power at 5,500 rpm and its maximum torque between 3,500 and 4,500 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a 4-speed automatic transmission. The 1.8-liter naturally aspirated engine delivers 130 horsepower and a maximum torque of 170 Nm. This engine reaches its maximum power at 6,200 rpm and its maximum torque between 3,500 and 4,500 rpm. It also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a 4-speed automatic transmission. 3. Suspension: The Suzuki SX4 uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
9
5
Share

Differences between Qidian 150G2 and G1?

Here are the differences between Qidian KD150-G2 and G1: 1. In terms of power performance: The Qidian 150G2 is a modified version of the retro-style G1 model launched in 2019 by Daye Motorcycle Factory. With a high-revving engine delivering 13kW, it ranks first among domestic models. In the domestic market, only the Aprilia 150 can rival it. Currently, Qidian's official website claims that the G2 has achieved a maximum power of 14kW, meaning there is a theoretical improvement in engine performance compared to the older model. However, the actual experience and progress remain to be seen. 2. Other configurations: Qidian has retained the backlit handlebar buttons from the Zontes models. The details, quality control, and handling are all impeccable. The Bosch fuel injection system and Bosch ABS offer excellent value for money. The central nitrogen rear shock absorber also provides strong support. However, features like the electric fuel tank cap and keyless ignition found on the 150U are not available on the 150G1, and the G2 has not introduced these changes either. Although the stock rearview mirrors are slightly small with limited viewing angles, front mounting holes are pre-installed, allowing for aftermarket upgrades. Additionally, there are now two seat height options (high and low) available, so riders need not worry about their height.
2
2
Share

Where is the memory card for the Haval Big Dog dash cam located?

The memory card is stored at the top side of the dash cam. Swing the dash cam, pry it open, and you will see a black card, which is the memory card. Press the memory card downward with your hand, and when you hear a click sound, it means the memory card has been ejected. At this time, the dash cam screen will display a prompt indicating no memory card, which means the memory card has been successfully removed. Here is some related information about the Haval Big Dog: 1. Introduction: The Haval Big Dog is a new SUV model from Haval. It will be equipped with features such as electronic parking brake, auto hold, automatic air conditioning, ACC adaptive cruise control, voice recognition, intelligent connectivity system, and wireless charging. 2. Design: Based on the lifestyle needs of the younger generation who seek off-road adventures, the Big Dog adopts a "New Trend Power Aesthetics" design that blends retro and modern styles, as well as sophistication and ruggedness, making the entire vehicle stylish and cool. Design elements such as the "Earth's Eye" circular LED headlights, "Golden Coast" split waistline, horizon-style full-width taillights, snowfield plateau roof, glacier guard plate, "Stonehenge" air vents, and "Galaxy Ring" gear shift knob are all inspired by nature, ushering in a new era of trendy off-road vehicles.
1
0
Share

What is the fuel consumption per 100 kilometers for the Rolls-Royce Phantom?

The combined fuel consumption of the Rolls-Royce Phantom is 14.2-14.5L/100km. Currently, there are two models of this vehicle on sale. The standard wheelbase version has a combined fuel consumption of 14.2L/100km, while the long wheelbase version has a combined fuel consumption of 14.5L/100km. The above figures are based on the NEDC combined cycle, which measures fuel consumption under standardized test conditions. The actual fuel consumption is higher than this value, approximately around 15.75L/100km. Automobile fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline for combustion. Heavier vehicles also consume more fuel as greater mass requires more driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and consequently fuel consumption. Natural wind: Driving against the wind or during windy conditions increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, injected gasoline does not atomize easily during cold starts, requiring more fuel for combustion, thus increasing consumption. Additionally, at lower temperatures, the engine's computer may control higher idle speeds to warm up the engine, which also increases fuel consumption.
19
0
Share

Can You Turn Right at a Red Light Without a Right-Turn Arrow?

There are three scenarios where vehicles can turn right at a red light, as detailed below: Circular Traffic Light: If the circular traffic light at an intersection turns red, vehicles in the right-turn lane can proceed to turn right. However, you must ensure not to interfere with other vehicles, pedestrians, and vehicles on the road to your rear and right. Arrow-Shaped Right-Turn Signal: If you encounter an arrow-shaped right-turn signal at a crossroad, you cannot turn right when the red arrow is illuminated. Turning right under these conditions will be considered running a red light. Circular Red Light with Additional Signage: At some complex intersections, you may find supplementary signage above the traffic light indicating whether right turns are permitted during a red light. If the sign states "Right Turn on Red," then turning right is allowed. If it says "No Right Turn on Red," you must wait for the green light before proceeding. Legal Regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicle and non-motor vehicle traffic signals are defined as follows: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of through traffic or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed provided they do not obstruct the passage of other vehicles or pedestrians. Per the "Road Traffic Safety Law," traffic signal regulations are as follows: Article 25, Paragraph 2 states that traffic signals include traffic lights, signs, road markings, and the directions of traffic police. Article 26 specifies that traffic signals consist of red, green, and yellow lights. Red means stop, green means go, and yellow serves as a warning. Article 38 requires that vehicles and pedestrians follow traffic signals; when directed by traffic police on-site, they must comply with the officers' instructions. On roads without traffic signals, movement should be based on safety and smooth traffic flow principles. Article 62 mandates that pedestrians use crosswalks or overpass facilities when crossing roads or intersections. At signalized crosswalks, they must follow the traffic signals. Where no signals or crosswalks exist, pedestrians should cross only after ensuring safety. Article 89 stipulates that pedestrians, passengers, and non-motor vehicle drivers violating road traffic laws may receive a warning or a fine ranging from 5 to 50 yuan. Non-motor vehicle drivers refusing to pay fines may have their vehicles impounded. Motor vehicle drivers violating traffic signals will receive a 6-point penalty. Right-Turn Precautions: Watch for Oncoming Straight Traffic: When turning right, check both right and left for approaching vehicles. Monitor Opposite Left-Turning Vehicles: Besides straight-moving traffic, be aware of vehicles turning left from the opposite direction. Yield to all left-turning or straight-moving vehicles from your left. Observe Pedestrians: Right turns often involve crosswalks both before and at the corner. Always check for pedestrians before proceeding.
6
1
Share

How long does it take for ETC toll deduction after passing through the highway?

The specific time for ETC highway toll deduction is as follows: For ETC prepaid cards, users must deposit funds in advance before use. The deduction generally occurs within 5 working days, depending on the regulations of the issuing bank. For ETC credit cards, which have an overdraft function, the bank will tally the deduction details daily. Users only need to pay off the credit card bill by the due date. When using an ETC debit card to pass through a highway toll station, no fee is charged at the time. The system records the passage and automatically deducts the corresponding fee from the user's authorized bank account in batches. Directly linked to a personal credit card, the system automatically deducts the amount without the need for top-up, and repayment is made monthly. A 1% handling fee is added for each transaction. Due to varying execution efficiency across regions, there is no specific deduction time for ETC debit cards, but it is generally deducted monthly. ETC users can set a billing date to check the monthly ETC fees. ETC stands for Electronic Toll Collection, meaning an electronic toll system. To apply, the vehicle owner must provide a valid ID card and the original and photocopy of the vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp. A bank card for deducting highway toll fees is also needed. Applicants must be between 18 and 60 years old and own the vehicle in their name. How ETC works: Through an onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, it settles accounts with the bank in the background, allowing vehicles to pay highway or bridge tolls without stopping. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and pollution; Cost-saving: Reduces vehicle start and brake frequency, minimizing wear and fuel consumption; Efficiency improvement: ETC lanes can theoretically increase passing efficiency by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.