What type of engine oil is best for the Emgrand?

1 Answers
OEmiliano
07/29/25 6:43pm
Geely Emgrand is suitable for engine oil with the specification SAE10W-30. Here is an introduction to the engine oil for Geely Emgrand: 1. When the ambient temperature is below 0°C, you can switch to SAE5W-30, with an API quality grade of SL or higher. 2. Naturally aspirated engines can use mineral or synthetic oil, while turbocharged engines should use synthetic oil. 3. It is recommended to use the original Emgrand engine oil or oils such as Mobil Liguid, Shell Helix HX6, etc. Here are more details about engine oil: 1. Carefully observe the color and quality of the lubricating oil: Domestic genuine engine oil is mostly light blue, bright in color, and flows evenly. Any oil with uneven color or flowing with abnormal streaks is counterfeit or deteriorated. Imported lubricating oil is mostly golden with a slight blue tint, crystal clear, and the oil drum is finely made, with clear and neat patterns and lettering edges, without color leakage or overlapping. Otherwise, it is fake. 2. Carefully inspect the packaging: Inferior lubricating oil has poor packaging printing quality, with unclear text. However, some counterfeit lubricating oils use recycled genuine packaging, which is harder to identify. 3. Smell the oil: Qualified lubricating oil should have no special odor. If it has a pungent or unusual smell, it is deteriorated or inferior lubricating oil.
Was this review help?
4
4
Share
More Forum Discussions

Where is the OBD port located on the Volkswagen Touran?

Volkswagen Touran's OBD port is located under the steering wheel on the driver's side. Taking the 2021 Volkswagen Touran as an example, it is an MPV with the following dimensions: length 4527mm, width 1829mm, height 1659mm, wheelbase 2791mm, minimum ground clearance 120mm, and curb weight 1515kg. The 2021 Volkswagen Touran features a front MacPherson strut independent suspension and a rear four-link independent suspension. It is equipped with a 1.4T turbocharged engine delivering maximum power of 150PS, maximum torque of 250Nm, and maximum power output of 110kW, paired with a 7-speed dual-clutch transmission.
19
4
Share

How to Adjust the Headlight Height of Wuling Hongguang?

The method to adjust the headlight height of Wuling Hongguang is: 1. Open the engine hood; 2. Locate the two adjustment screws near the headlight, one for adjusting height and the other for adjusting left-right alignment; 3. Adjust the corresponding height adjustment screw accordingly. Models under the Wuling Hongguang series include: Wuling Hongguang S, Wuling Hongguang V, Wuling Hongguang Plus, Wuling Hongguang S3, Wuling Hongguang Mini, etc. Taking the 2020 Wuling Hongguang S as an example, its body dimensions are: length 4390mm, width 1660mm, height 1750mm, wheelbase 2720mm, and curb weight 1185kg.
1
5
Share

What is the wheelbase of the Citroën C2?

The wheelbase of the Citroën C2 is 2443mm. Taking the 2013 Citroën C2 as an example, it is a compact car with body dimensions of: length 3878mm, width 1676mm, height 1438mm, a fuel tank capacity of 50 liters, and a luggage compartment capacity ranging from 245 to 1130 liters. The vehicle weight is 1040kg. The 2013 Citroën C2 features a MacPherson strut independent front suspension and a longitudinal swing-arm type independent rear suspension. It is equipped with a 1.4L naturally aspirated engine, delivering a maximum horsepower of 76PS, a maximum torque of 120Nm, and a maximum power output of 56kW. It is paired with a 5-speed manual transmission.
9
4
Share

What does the yellow triangle warning light with an exclamation mark on the BMW X5 dashboard mean?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning, signaling issues with the transmission or low transmission fluid levels. The transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, indicating either a malfunction in the brake system or low brake fluid levels. Immediate inspection of the brake system is necessary to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
12
4
Share

How to Remove ISOFIX Hard Connectors?

ISOFIX hard connector removal method: 1. Adjust the safety seat headrest to the highest position; 2. Press the shoulder strap adjuster to extend the shoulder straps to their maximum length; 3. Open the buckle to separate the shoulder straps left and right, placing them on both sides of the seat; 4. Fasten the five-point buckle and adjust the shoulder straps to their shortest length; 5. Push the seat inward while simultaneously pressing the red buttons on the ISOFIX connectors, then pull backward forcefully until a click sound is heard, indicating the ISOFIX connectors have been successfully removed. ISOFIX is an International Standards Organization fixation device, with the main advantage of securely connecting child car safety seats to the vehicle, providing a simpler and safer method for car seat installation.
3
2
Share

Is the Ferrari 488 turbocharged?

Ferrari 488 is turbocharged, equipped with a 3.9-liter twin-turbocharged engine, delivering a maximum power of 720 horsepower and a peak torque of 770 Nm. The maximum power is achieved at 8,000 rpm, while the peak torque is available at 3,000 rpm. In terms of exterior design, the Ferrari 488 bears a strong resemblance to the 458 model, with more mature aerodynamic applications. The powerful front fascia perfectly combines with the streamlined body, making the Ferrari 488 more aggressive. The interior design of the Ferrari 488 largely follows the design concept of the 468, featuring a black and red color scheme that exudes wild passion. Additionally, the gear shift button section adopts a brand-new design style.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.