What type of engine oil is best for the Changan CS35?

1 Answers
AbelRose
07/29/25 11:44am
For the Changan CS35, it is recommended to use SL-grade 5W-30 viscosity engine oil. The required oil volume is 3.4L. After filling, the oil level on the dipstick should be between the MIN and MAX marks, neither below MIN nor above MAX. Note that engine oil should only be added when the engine is cool. Relevant details are as follows: 1. The '5W' indicates low-temperature viscosity; the smaller this number, the better the oil's fluidity. The '30' represents high-temperature viscosity; the larger this number, the higher the oil's viscosity and the better its sealing properties. 2. Higher oil viscosity is not always better. If the oil's viscosity is too high, it can also affect the engine. Higher viscosity means relatively poorer fluidity, which may prevent the oil from promptly covering all engine components, thus failing to fully utilize the oil's functions.
Was this review help?
9
5
Share
More Forum Discussions

What is a Range Rover?

Range Rover is the luxury brand under Land Rover. More details about Range Rover are as follows: 1. The exterior design of Range Rover follows the family-style design. The front grille adopts a trapezoidal design, with chrome trim strips decorating the interior of the grille, featuring a mesh-like design. 2. The front and rear suspensions of Range Rover are double-wishbone independent suspension and multi-link independent suspension, with electric power steering. The front and rear brake types of Land Rover Range Rover are both ventilated disc, and the parking brake type is electronic parking. 3. The length, width, and height of Range Rover are 5000mm/2073mm/1869mm respectively, with a wheelbase of 2922mm.
3
1
Share

What Causes the Abnormal Noise When Braking a New Car?

Abnormal noise from new brake pads may be caused by the initial break-in effect after installation. New brake pads and rotors require a break-in period, during which such noises may occur when braking. This is a normal phenomenon, and the sound will disappear after a period of break-in. Additional information: 1. Both brake rotors and pads are high-wear components. Each time the brakes are applied, these two parts experience friction, leading to natural wear over time. When the wear becomes excessive, abnormal noises will naturally occur, so regular inspection and replacement are necessary. Typically, brake pads should be replaced every 60,000-80,000 kilometers, while brake rotors should be replaced every 100,000-120,000 kilometers. 2. If the brake shield is loose, improperly installed after disassembly, damaged due to impact, or if the brake pads are completely worn out, the limit shim rubbing against the brake rotor can also produce noise. Generally, squeaking noises when the car is cold or after driving through water are normal. However, if the squeaking noise persists at any speed after the car has warmed up, it is recommended that the owner promptly visit a 4S shop or repair facility to diagnose and address the issue.
16
1
Share

Which Gear Should Be Engaged for Reversing?

When reversing, engage the reverse gear. The reverse gear is a standard driving gear found in all vehicles, typically marked with the uppercase letter 'R'. Engaging the reverse gear allows the car to move backward. Below is some relevant information about the reverse gear: Precautions for Engaging the Reverse Gear: The reverse gear is the 'R' position. It should only be engaged after the vehicle has come to a complete stop; otherwise, it may easily damage the transmission. For models equipped with a lock button, the button must be pressed to switch gears. Pressing the Lock Button: The lock button must be pressed when entering the 'P' (Park) or 'R' (Reverse) gears, as well as when shifting out of 'P'. Specifically, gears that could potentially cause reverse impact to the transmission are locked, and the lock button must be pressed to unlock when shifting.
10
4
Share

What is the tutorial for using the foot brake in an automatic transmission?

The tutorial for using the foot brake in an automatic transmission is as follows: 1. After the vehicle comes to a complete stop, shift the transmission to the neutral (N) position. 2. Press the parking foot brake (this will engage the parking brake) and turn off the engine. 3. After pressing the foot brake, shift the transmission from the N position to the parking (P) position. The method to activate the foot brake in an automatic transmission is as follows: 1. When starting, first press the brake with your right foot, shift the transmission to the N position, and start the engine. 2. After the engine starts, press the parking foot brake again with your left foot to release the parking brake, which will then return to its original position due to spring force. 3. Shift the transmission from the N position to the drive (D) position and slowly release the brake, allowing the vehicle to move forward.
8
2
Share

What type of vehicle is the Dongfeng Fengguang ix5?

The Dongfeng Fengguang ix5 is positioned as a midsize SUV. More details about the Dongfeng Fengguang ix5 are as follows: 1. The Dongfeng Fengguang ix5 adopts a brand-new life-inspired design language, featuring a large-area grille on the front face, complemented by horizontal chrome trim for decoration. The headlights on both sides of the front face are designed with an upward-slanting style, connecting with the grille to further highlight the vehicle's sporty character. 2. The Dongfeng Fengguang ix5 is equipped with a 1.5T turbocharged engine, available in both high-power and low-power versions. The low-power 1.5T engine delivers a maximum power of 110 kW and a maximum torque of 220 Nm, while the high-power 1.5T engine offers a maximum power of 132 kW and a maximum torque of 270 Nm.
6
5
Share

Can a Car Change Its Color?

It is possible to change the color of a car, and the specific details are as follows: 1. To change the color of a vehicle, the owner needs to apply at the vehicle management office. The office will provide a color change template, and the car should be painted according to the template's color and paint model. Afterward, the owner must return to the vehicle management office to take new photos for the vehicle registration certificate. 2. Currently, not all colors can be changed. If the desired color is not one of the original factory colors registered when the vehicle was manufactured, it will not pass the inspection. For example, if the original factory colors registered at the vehicle management office include red, then similar colors like matte red, deep red, or pearl red can be chosen.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.