What Type of Engine Oil is Best for the Arrizo 5?

3 Answers
LaKiara
07/29/25 4:45am
The recommended engine oil type for the Arrizo 5 is 5W-30. Below are some key considerations when selecting engine oil for the Arrizo 5: 1. Choose oil based on engine requirements: There's no need to use premium-grade oil in engines with lower requirements, nor should you use lower-grade oil in high-performance engines. 2. Prefer multi-grade oils: Multi-grade oils offer cost savings, longer service life, and better engine protection. Due to their characteristics, they may appear darker or show lower oil pressure than conventional oils, which is normal. 3. Many domestic brand oils offer excellent quality at significantly lower prices than imported alternatives, making them reliable choices without the need to pursue foreign brands exclusively. 4. If the engine is in good condition and ambient temperatures are low, use lower-viscosity oil for better flow. In hot weather or with severely worn engines, higher-viscosity oil helps maintain oil film and reduce engine wear.
Was this review help?
1
1
Share
OGeorge
08/12/25 5:33pm
When choosing engine oil for the Arrizo 5, having driven this car for several years myself, I believe the most reliable approach is to prioritize the specifications recommended in the user manual. Chery typically suggests using 5W-30 or 5W-40 viscosity oils, especially in areas with hot summers or cold winters, as these oils offer good adaptability and protect the engine from wear. Personally, I prefer fully synthetic oil. Although it's more expensive, it's more convenient in the long run—it resists high-temperature oxidation, prevents carbon buildup, and keeps the engine quieter and smoother at high speeds. Avoid buying cheap mineral oils, as they can lead to higher fuel consumption and sluggish acceleration. As for brands, Shell and Mobil are both good choices. You can buy them online, but make sure to choose reputable stores. Remember to check the oil level every 5,000 kilometers and follow the manual's recommended oil change intervals—don't delay it for too long.
Was this review help?
13
5
Share
Expand All
McRachel
10/03/25 4:05am
When selecting engine oil for the Arrizo 5, focus on its engine compatibility specifications. Generally, API SN or SP grade 5W-30 semi-synthetic or full synthetic oils are recommended, as they are far more reliable than traditional mineral oils. Synthetic oils resist breakdown under high temperatures, reduce engine friction and noise, and enable faster cold starts. Avoid arbitrarily adjusting viscosity—5W-30 suits most climates, as incorrect viscosity can reduce fuel efficiency. I recommend trusted brands like Castrol or Total for stable quality. Driving habits also influence oil choice—full synthetic is ideal for frequent long-distance driving, while semi-synthetic suffices for city commuting. Always inspect the oil filter and dipstick during oil changes to ensure the system operates smoothly.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

Which country's car is Honda?

Honda is a Sino-Japanese joint venture automobile. Honda's models include URV, Jade, Spirior, Spirior Hybrid, Greiz, Gienia, Civic, CRV, XRV, Elysion, etc. Among them, the Honda Elysion is a mid-to-high-end MPV launched by Dongfeng Honda. The body dimensions of this car are 4940mm in length, 1845mm in width, and 1710mm in height, with a wheelbase of 2900mm. The Elysion offers two powertrain options: a 2.0L and a 2.4L engine. The 2.0L is a hybrid version, with the engine producing a maximum power of 146 horsepower and the electric motor delivering a maximum power of 184 horsepower. The 2.4L engine has a maximum power of 137 kW and a maximum torque of 243 Nm.
16
0
Share

Does the Outlander have a manual transmission?

Outlander does not have a manual transmission. Operation of switching to manual mode in Outlander: First, press the brake pedal all the way down, shift into D gear, and then push the gear lever to the right. From this point on, you can use the paddle shifters: + to upshift and - to downshift. Although the manual mode is a bit more complicated, it allows for precise control of gear shifts at the appropriate RPM and torque. Gear selection for Outlander: Uphill road sections require more torque than usual, so it is recommended to use D- to reduce speed and increase torque. Some slopes are not very steep, and if the gear is too low, it will waste power. In such cases, you should promptly use D+ to upshift. For steeper slopes, you can engage the S gear.
16
2
Share

Reasons Why a Lynk & Co Car Suddenly Fails to Start

Lynk & Co car suddenly fails to start due to reasons such as a dead battery, damaged sensors, or fuel pump issues. Below are the specific causes: Dead Battery: A dead battery, caused by battery damage, prolonged parking with the engine off while using onboard electronics, or leaving lights on, can result in the car failing to start. Damaged Sensors: If sensors like the crankshaft position sensor, camshaft position sensor (in some models), or mass airflow sensor are damaged, the vehicle may fail to start. Fuel Pump Failure: When the fuel pump is damaged, it cannot supply fuel or provides insufficient fuel to the fuel system during startup, causing the vehicle to fail to start.
6
4
Share

How Long Can Tires Be Submerged in Water Before Being Affected?

If car tires are submerged in water for more than a day or the vehicle is parked in standing water where the water level exceeds the wheel hubs, it will have an impact. Here is relevant information: 1. Disadvantages of long-term submersion: Long-term submersion of car tires in water or parking the vehicle in standing water where the water level exceeds the wheel hubs can significantly affect the wheel hubs and brake components. Since both the wheel hubs and brake components are made of metal, submersion in water can lead to oxidation reactions, resulting in rust formation on the wheel hubs and brake parts, which can impair the vehicle's braking performance. 2. Avoid parking in areas with standing water: Whenever possible, avoid parking the car in areas with standing water. Instead, park on a cool, dry, and level surface, and also prevent the tires from coming into contact with oil, acids, flammable materials, and chemical corrosives, as these can cause corrosion, deformation, softening, and other damage.
15
5
Share

How many types of motorcycles are there?

Motorcycles can be classified as follows: 1. Brand classification: Motorcycles can be divided into imported vehicles, joint venture vehicles, and domestic vehicles based on their brands. The classification mainly depends on the production location and brand composition. 2. License classification: From the perspective of permissible driving types, motorcycles can be categorized into three classes: light motorcycles, ordinary two-wheeled motorcycles, and ordinary three-wheeled motorcycles. The differences among them primarily lie in the actual displacement and vehicle structure. 3. Displacement classification: Apart from license classification, motorcycles can also be divided into three major categories based on the engine's actual displacement: small-displacement, medium-displacement, and large-displacement motorcycles.
8
2
Share

Should the fuel tank of a new car be filled up?

It is not advisable to fill up the fuel tank of a new car, as it may cause the fuel float and sensor to malfunction, leading to inaccurate fuel gauge readings. Overfilling the fuel tank can have the following effects: 1. Risk of fire hazard: When the tank is overfilled, the expansion of gasoline can rupture the tank. If overfilled, gasoline may overflow through the vent hole, and if exposed to an open flame, it can ignite instantly; 2. Blockage of the vent hole: If the vent hole is blocked, negative pressure will form inside the fuel tank, resulting in poor fuel supply or even a complete fuel supply failure; 3. Damage to vehicle components: Overfilling the fuel tank increases the overall weight of the car, leading to higher fuel consumption. Additionally, excessive fuel can enter the pipelines, harming the carbon canister and flowing into the intake manifold, causing the spark plugs to malfunction and potentially preventing the vehicle from starting.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.