What type of engine oil does the Sylphy use?

What is the fuel consumption of a manual Mazda 6?

Manual Mazda 6 fuel consumption is 8.0L/100km. How to calculate fuel consumption: The first method is through the vehicle's dashboard records. After resetting the mileage data, the onboard computer automatically calculates the vehicle's fuel consumption based on the recorded mileage and fuel consumption data. The second method is by recording the distance traveled after a single refueling and then calculating the vehicle's fuel consumption. The fuel consumption obtained by both methods is the average fuel consumption of the vehicle. Methods to reduce fuel consumption: When starting the vehicle, it is advisable to start in a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Starting by gently pressing the accelerator can shorten the engine warm-up time and effectively improve fuel utilization, thereby achieving fuel-saving effects.

20

1

Share

Is the Motorcycle Exempt from Inspection for 6 Years or 4 Years?

Motorcycles are exempt from inspection for the first 6 years. However, exemption from inspection does not mean exemption from annual review. It only means that the vehicle does not need to undergo on-site inspection, i.e., the vehicle does not need to go to a testing institution or the vehicle management office for safety and technical inspection. Nevertheless, the owner must still bring relevant documents to the vehicle management office every two years to collect the inspection compliance label. After three exemptions, the vehicle must undergo on-site inspection every year. The 6-year exemption policy only applies to new vehicles. From the date of registration, the inspection cycle remains unchanged. According to the original cycle regulations, inspections are required every two years for the first 4 years, and then once a year. For new vehicles, the inspection compliance label must be applied for in the 2nd, 4th, and 5th years after registration, without the need for on-site inspection at a testing institution. Motorcycles registered for more than 6 years (including 6 years) must undergo on-site inspection at a testing institution every year. For passenger vehicles used for commercial purposes, inspections are required once a year within the first 5 years and every 6 months thereafter. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years and every 6 months thereafter. For small and micro non-commercial passenger vehicles, inspections are required every two years within the first 6 years, once a year thereafter, and every 6 months after 15 years. For motorcycles, inspections are required every two years within the first 4 years and once a year thereafter.

4

1

Share

What are the advantages of full synthetic engine oil?

The advantages of full synthetic engine oil are as follows: 1. Excellent low-temperature fluidity: Full synthetic oil has low viscosity and high viscosity index, which can save energy consumption during cold starts, accelerate oil film formation, and reduce dry wear phenomena in engine components during cold starts; 2. Excellent high-temperature oxidation resistance: Synthetic oil has better thermal oxidation stability than mineral oil, ensuring performance stability during long-term use; 3. Low evaporation loss: The evaporation loss of synthetic oil is much lower than that of mineral oil, which can improve fuel economy, reduce exhaust emissions, and extend the service life of catalytic converters.

7

5

Share

How to deal with P1545 trouble code?

p1545 trouble code is caused by throttle carbon deposit being too dirty, throttle not fully closing, throttle position actuator or its circuit or connector failure, etc. The solutions include cleaning the throttle or directly replacing it with a new one. It is recommended to go to a 4S shop for inspection and repair. More relevant information is as follows: 1. The throttle, commonly known as the accelerator, is a controllable valve used to regulate the engine's air intake. 2. The Throttle Position (TP) sensor's function is to send the throttle opening degree to the Electronic Control Unit (ECU) in the form of an electrical signal, serving as one of the basic parameters for controlling engine fuel injection.

10

3

Share

What is the normal range for tire pressure difference?

A difference of 0.1-0.2 bar in tire pressure is within the normal range. Generally, vehicle tire pressure should be maintained around 2.3-2.5 bar. However, due to thermal expansion and contraction effects, it's normal for summer tire pressure to be 0.1-0.2 bar lower than the standard range. Conversely, in winter, it's normal for tire pressure to be 0.1-0.2 bar higher than the standard range. In reality, it's quite difficult to achieve identical pressure in all four tires unless you're obsessive about it. However, it's important to note that uneven tire pressure between left and right tires can lead to braking time differences, operational instability, steering difficulties or heaviness, while also reducing tire lifespan, increasing puncture risks, and raising fuel consumption. These issues become more pronounced when the vehicle is heavily loaded. How dangerous is the pressure difference between left and right tires? There's no precise numerical threshold, but generally it's best not to exceed 0.2 bar difference. The normal tire pressure range is typically between 2.3-2.5 bar. When carrying a full load (5 passengers), adjusting tire pressure to around 2.5 bar is more appropriate; for two passengers, 2.3 bar is normal. However, different vehicle types including domestic cars, private vehicles, and vans have varying factors like body weight and chassis height. Manufacturers' standard tire pressures differ. Therefore, the recommended tire pressure should follow your vehicle manufacturer's specifications, as tire pressure settings primarily consider vehicle-specific factors like body weight and chassis height. It's not necessarily related to tire brands. Unless the manufacturer specifies otherwise, no special seasonal adjustments are required for winter or summer. Of course, it's recommended to measure tire pressure at normal temperature conditions.

9

2

Share

Is the BMW Mini spacious?

BMW Mini has dimensions of 3729mm x 1683mm x 1407mm with a wheelbase of 2467mm, which can meet normal requirements. Meaning of vehicle dimensions: Vehicle dimensions refer to the regulatory limits on the total height, width, and length of a car. The height boundary is the distance between the highest point of the vehicle and the vehicle support plane. The width is the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The length is the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. Composition of main dimensional parameters of a car: The main dimensional parameters of a car include wheelbase, track width, overall length, overall width, front overhang, rear overhang, approach angle, departure angle, minimum ground clearance, etc.

1

3

Share

What type of engine oil does the Sylphy use?

What is the fuel consumption of a manual Mazda 6?

Is the Motorcycle Exempt from Inspection for 6 Years or 4 Years?

What are the advantages of full synthetic engine oil?

How to deal with P1545 trouble code?

What is the normal range for tire pressure difference?

Is the BMW Mini spacious?

How to Turn Off the Air Conditioning in a Chevrolet Cruze?

What is the recommended speed for a new car during the high-speed break-in period?

Is it necessary to replace the steering knuckle ball joint?

Is the Accord produced by GAC Honda or Dongfeng Honda?