What type of engine oil does the Jetta VS5 use?

1 Answers
VonIsabelle
07/29/25 8:16pm
Jetta VS5 uses 5W30 engine oil. The number before the W in the oil indicates that the smaller the value, the better the fluidity of the oil at low temperatures. 0 represents the minimum working temperature of the oil at minus 35 degrees Celsius; the number after W is the index value of the oil's resistance to high temperature. The higher the value, the better the fluidity of the oil at high temperatures. Common numbers are 20, 30, 40, 50, and 60. The Jetta VS5 is the first SUV model of the Jetta brand. The front face adopts Volkswagen's X design elements and extends bidirectionally to the hood and lower grille. The design of the side lines of the body continues the Volkswagen brand design, running through the entire body.
Was this review help?
3
5
Share
More Forum Discussions

Can a Temporary ID Be Used for the Driving Test - Subject Two?

A temporary ID can be used for the Subject Two driving test. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," first-time applicants for a driving license must submit their identity proof. Although a temporary ID is valid for only three months, it still serves as the applicant's identity proof and holds the same legal validity as a permanent ID. The Subject Two test typically requires magnetic stripe scanning, which a temporary ID cannot support. If using a temporary ID for the Subject Two test, applicants must inform the test center staff in advance. Subject Two, also known as the small road test, is part of the motor vehicle driving license assessment. It refers to the field driving skills test, which includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), as of June 1, 2021, the stopping and starting on a slope test is no longer required for C2 and C5 license applicants. The test is scored out of 100, with deductions of 20, 10, or 5 points for errors. A score of 80 or above is required to pass. Below is a detailed introduction: Reversing into a garage: The driver must reverse into the garage from the right starting point, then drive to the left and reverse into the garage again before returning to the starting point. No stopping is allowed during the process. Parallel parking: The vehicle must be driven to a position parallel to the garage entrance, then reversed into the garage without any pauses. Turning at a right angle: The driver must complete the turn without crossing the line or stopping. Stopping and starting on a slope: The examinee must drive to the slope test point and stop with the front wheels precisely on the line. After passing this part, the examinee must start on the slope without rolling backward. Any mistake may result in point deductions or failure. Driving through curves: The driver must navigate a lane with two turns greater than 40 degrees in one go without stopping, crossing the line, or leaving the lane. Subject Two Test Tips: Upon entering the vehicle, the first thing to do is adjust the seat and mirrors to a comfortable position and fasten the seatbelt. For parallel parking, find the correct angle quickly, turn the steering wheel promptly, and coordinate with the vehicle's speed. On the slope, remember to engage the handbrake, signal left when starting, release the handbrake, and balance the clutch while gently pressing the accelerator to avoid stalling or rolling back. For right-angle turns, identify the turning point quickly and coordinate with the vehicle's speed to avoid deviation. For curve driving (S-curve), the safest method is to slow down. Those with good driving skills may pass quickly in one go. When reversing into a garage, control the speed, identify reference points, and make minor adjustments if deviations are observed in the mirrors.
17
3
Share

How to Connect the Bluetooth in the Low-Trim Chevy Cavalier?

Turn on the Bluetooth on both the car and your phone, then click the Bluetooth search on your phone to find and connect to the car's Bluetooth. Sometimes, the car's Bluetooth may provide a pairing password, which you should enter into your phone as prompted to complete the connection. Steps: First, enable Bluetooth on the phone you want to pair; turn on the car's Bluetooth and press the multifunction button until the indicator light emits a blue glow. Use the car's Bluetooth to search for the phone's Bluetooth, or alternatively, search for the car's Bluetooth device via the phone. Follow the instructions in the phone's user manual to set the Bluetooth phone to search for Bluetooth devices. The setup steps involve accessing the 'Settings,' 'Connections,' or 'Bluetooth' menu on the phone, then selecting the option to discover Bluetooth devices; after connecting the device, enter the password '0000' and press the 'Yes' or 'OK' button. Upon successful pairing, the indicator light will emit a blue glow and flash rapidly three times, then flash once every 7 seconds. If unsuccessful, the indicator light will continue to alternate between red and blue, requiring re-pairing; once connected, exit the setup; to switch calls between the phone and the car, hold the multifunction button or use the corresponding function on the phone. Adjust the volume by pressing the volume control buttons on the car. Connection Failure: If there's a compatibility issue between the phone's system and the Bluetooth system, update the phone's system; during the connection process, avoid being too far from the car's Bluetooth, as this may affect pairing; when high-power electrical devices are near the display or the phone is covered by metal materials, Bluetooth pairing can easily be interrupted.
19
0
Share

Will an early vehicle inspection advance the next inspection date?

An early vehicle inspection does not affect the timing of the next inspection. Vehicle inspection schedule: The inspection is based on the date specified on the vehicle registration certificate. The owner of the vehicle can apply for the inspection compliance mark at the vehicle registration office up to three months before the expiration of the current inspection period. For example, a vehicle due for inspection in June can undergo the inspection in April, May, or June. Purpose of vehicle inspection: Vehicle inspection is a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is essentially an annual check-up for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle inspections help to promptly identify and eliminate potential safety hazards, encourage proper vehicle maintenance, and reduce the occurrence of traffic accidents.
14
3
Share

Why is the reverse camera not displaying after installation in the 2021 RAV4?

The reason the reverse camera is not displaying after installation in the 2021 RAV4 is due to a connection issue between the camera and the central control screen. The reasons why the reverse camera screen does not display are: Poor wiring connection, the reverse trigger wire is not connected, no voltage at the video connector, or a damaged camera. The reverse camera, also known as the parking assist system, reverse visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. Modern reverse radar systems have upgraded technology, improved performance, and are applied to various vehicle types, such as trucks, buses, school buses, combine harvesters, corn harvesters, coaches, and construction machinery. Whether in terms of structure and appearance or performance, they each have unique characteristics. The most commonly used displays are digital displays, screen displays, and multifunctional reverse mirror displays. What is a reverse camera: The reverse camera is a device used in various large, medium, and small vehicles for reversing or driving safety assistance, also known as the parking assist system, reverse visual system, or onboard monitoring system. This system provides a clear and intuitive view of the rear when reversing, making it one of the most practical configurations for reversing safety. When the reverse gear is engaged, the system automatically activates the high-definition reverse camera located at the rear of the vehicle, displaying the rear view clearly on the LCD screen, allowing for accurate assessment of the rear road conditions. Even at night, it provides a clear view through infrared. The automotive reverse camera is a comprehensive system that can also be added to the vehicle by installing a camera device and an onboard display.
3
3
Share

What is the fuel consumption of the GL8 2.4 and 3.0?

gl82.4 and 3.0 kilometers fuel consumption 2.4 average 13 liters; up to 15 liters. gl82.4 fuel consumption: Under normal driving conditions for the Buick Business GL8 2.4, one tank of fuel can cover 400 kilometers in the city and 800 kilometers on the highway. This means less than 18 liters per 100 kilometers in pure city driving, less than 9 liters per 100 kilometers in pure highway driving, and a combined fuel consumption of 15 liters per 100 kilometers. gl83.0 fuel consumption: Under normal driving conditions for the Buick Business GL8 3.0, one tank of fuel can cover 380 kilometers in the city and 740 kilometers on the highway. This means less than 18 liters per 100 kilometers in pure city driving, less than 9 liters per 100 kilometers in pure highway driving, and a combined fuel consumption of 15 liters per 100 kilometers. Extended information: The Buick GL8 is a classic top-tier MPV under the Buick brand. The Buick GL8 family consists of the GL8 Avenir, GL8 ES, and GL8 Business Travel vehicles, forming a tripartite product lineup. The entire series is equipped with a 2.0T SIDI direct-injection turbocharged engine, delivering a maximum horsepower of 191 and a top speed of 205 km/h. The entire series meets the China VI emission standards. As a model of top-tier MPVs, the Buick GL8 has achieved batch exports with its advantages of luxury, powerful performance, and spacious comfort, and has been praised by Southeast Asian media as the 'perfect MPV'. The Buick GL8 family consists of the GL8 Avenir, GL8 ES, and GL8 Business Travel vehicles, forming a tripartite product lineup.
2
5
Share

Is the Possibility of Vehicle Self-ignition High After Installing LED Lights?

Choosing LED headlights with the same wattage and specifications will not cause vehicle self-ignition. LED headlights are a type of cold light source, and their operating temperature is much lower than other light sources. Currently, LED headlights are one of the safest light sources available. The most common safety issue with headlights lies in the driver used for the lights. If it is not well-matched with the original vehicle, it may damage the headlights at best or affect safety at worst. Therefore, it is not recommended for car owners to modify their headlights themselves; instead, they should have it done by a professional. Legal regulations: According to Article 90 of the Road Traffic Safety Law, unauthorized modification of headlights violates vehicle safety principles and is punishable by a fine and 3 demerit points. If the original halogen headlights are replaced with xenon headlights, it will result in a fine as per the relevant provisions of the Road Traffic Safety Law. Therefore, it is not advisable to modify the type of headlight source, nor is it recommended to install additional lighting devices.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.