What type of engine oil does the Jetta VS5 use?

1 Answers
GrantAnn
07/29/25 10:18am
Jetta VS5 uses 5W40 engine oil with a capacity of 4.0 liters. For maintenance, the Jetta VS5 uses semi-synthetic engine oil, and the oil type can be selected according to the recommended specifications in the maintenance manual. The Jetta VS5 is the first SUV model launched after Jetta became an independent brand. Its body dimensions are 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. In terms of appearance, the Jetta VS5 adopts Volkswagen's family-style design, which better reflects the sporty character of the vehicle. The front features a large matrix-style grille with chrome trim, and the emblem has been replaced with Jetta's unique logo.
Was this review help?
6
4
Share
More Forum Discussions

How many test sessions can be scheduled simultaneously for Subject 1?

Subject 1 allows scheduling multiple test sessions simultaneously, generally up to two. Below are some essential tips to pass Subject 1: 1. Traffic signs: Guide signs have a blue background with white patterns; their shapes include circles, rectangles, and squares. Direction signs provide information about road directions, locations, and distances. Prohibition signs typically feature a white background, red circle, red bar, and black pattern, with the pattern overlapping the bar (except for a few exceptions). 2. Traffic police gestures: The direction the traffic police officer's face is pointing indicates which direction they are directing traffic. A right hand signal means 'slow down,' while a left hand signal indicates 'prepare to turn left.'
17
0
Share

Are New Energy Vehicles Afraid of Water?

New energy vehicles are not afraid of water. The most obvious difference between electric vehicles and fuel-powered vehicles is the energy supply mode. New energy vehicles use batteries to provide energy, which does not require air participation, nor do they have internal combustion engines, so there are no issues with air intake and exhaust. Therefore, they perform better in wading conditions compared to fuel-powered vehicles. Below is additional information: Water immersion test requirements: Single-cell seawater immersion, fully charged battery, immersed in 3.5% NaCl solution for 2 hours, with the solution completely submerging the battery, observe for 1 hour; Module seawater immersion, fully charged module, immersed in 3.5% NaCl solution for 2 hours, with the solution completely submerging the module, observe for 1 hour.
13
0
Share

How Often Should Antifreeze Be Added to a New Car?

For vehicles with short operating times, it can be replaced every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. Long-lasting antifreeze can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are found in the antifreeze, it should be replaced promptly, and the system should be cleaned. Types of Antifreeze: Antifreeze is generally categorized into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. How to Choose Antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose one with a freezing point at least 10°C lower than the lowest temperature in your region. Methods to Determine If Antifreeze Is Low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze levels, though it could also be caused by excessively high temperatures inside the cylinder. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving; add antifreeze promptly. Check the water level marks on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. To determine if antifreeze is low, observe the marks. If the antifreeze level is below the minimum mark, it indicates a shortage of antifreeze.
1
3
Share

What Causes the Buick Excelle to Shake on Startup and Have Weak Acceleration?

Buick Excelle shaking on startup and having weak acceleration can be attributed to the following reasons: 1. Severe engine carbon buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. The solution is to clean the fuel system and check if the idle control valve has carbon buildup, which should also be cleaned. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark plug firing can also lead to such symptoms. The solution is to inspect whether the spark plugs have excessive carbon buildup and replace them if necessary. 3. Unstable fuel pressure: If you have already cleaned the engine carbon deposits, cleaned the throttle body, replaced the fuel filter, and spark plugs but still notice the car shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can cause the car to shake. The solution is to check the fuel pressure and replace components if necessary. 4. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts act as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and the cabin, causing shaking at idle.
17
5
Share

What does it mean when a car lottery is under review?

It means that the public security authorities are verifying the information filled in. The following are the benefits of the car lottery: 1. Ease traffic pressure: The lottery has alleviated the rapid growth of the number of cars to a certain extent, and thus the problem of traffic congestion in some cities may be temporarily eased. 2. Lower car prices: The prices of some vehicles are likely to decrease, thereby slowing down the growth rate of vehicles, which can alleviate current traffic problems to a certain extent. 3. Achieve a certain degree of fairness: Under the increasingly chaotic traffic conditions, implementing the lottery policy is a relatively fair method under unfair conditions, giving everyone an equal opportunity.
18
0
Share

What is the fuel tank capacity of the Mercedes-Benz E300L?

The fuel tank capacity of this car is 66 liters. Here is more information about the Mercedes-Benz: 1. The Mercedes-Benz E-Class is a mid-size luxury sedan, and its competitors are the BMW 5 Series and Audi A6L. 2. The Mercedes-Benz E-Class is equipped with three engines: a 1.5-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. 3. The 1.5-liter turbocharged engine has a maximum power of 135 kW, a maximum torque of 280 Nm, a maximum power speed of 6100 rpm, and a maximum torque speed of 3000 to 4000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. 4. The low-power version of the 2.0-liter turbocharged engine has a maximum power of 190 kW, a maximum torque of 370 Nm, a maximum power speed of 6100 rpm, and a maximum torque speed of 1800 to 4000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. 5. The high-power version of the 2.0-liter turbocharged engine has a maximum power of 220 kW, a maximum torque of 400 Nm, a maximum power speed of 6100 rpm, and a maximum torque speed of 3000 to 4000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. The front suspension of the Mercedes-Benz E-Class uses a multi-link independent suspension, and the rear suspension also uses a multi-link independent suspension. All three engines are paired with a 9-speed automatic transmission.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.