···
Log in / Register

What type of engine oil does the Jaguar XJ use?

4 Answers
Willie
08/28/25 4:53am

The Jaguar XJ uses 0W20 engine oil. The functions of engine oil are: 1. Reducing friction and high temperatures; 2. Cooling and temperature reduction; 3. Cleaning and purifying; 4. Shock absorption and cushioning; 5. Rust and corrosion prevention. The Jaguar XJ is a large-sized vehicle with the following dimensions: length 5265mm, width 1899mm, height 1460mm, wheelbase 3157mm, and a fuel tank capacity of 80 liters. The Jaguar XJ is equipped with a 3.0T supercharged engine, delivering a maximum power of 250kW at 6500rpm and a maximum torque of 450Nm, paired with an 8-speed automatic transmission.

Was this review help?
16
0
Share
MacAriel
09/10/25 3:20am

After driving for so many years, I can tell that a car like the Jaguar XJ has high demands on engine oil—only full synthetic oil is reliable. Generally, 5W-30 viscosity is recommended, as it provides excellent cold-start engine protection and maintains stable oil pressure even under high-temperature, high-speed conditions. The owner's manual will specify Jaguar-specific standards like ACEA C2 or similar—never overlook this. Using the wrong oil can lead to increased wear and higher fuel consumption. I often remind owners to change the oil every 5,000 to 10,000 kilometers, depending on driving habits. For frequent long-distance trips or city stop-and-go traffic, premium brands like Mobil 1 are ideal. Additionally, the oil filter must be compatible to prevent contaminants from affecting performance. Regularly check the dipstick to ensure proper oil levels, which can significantly extend engine life. In short, skimping on oil isn’t worth it—good oil is an investment. Don’t wait for problems to arise before taking action.

Was this review help?
15
1
Share
Expand All
VonSamuel
10/24/25 4:09am

As a Jaguar owner, I've learned a lot from the forums. For the XJ, it's generally recommended to use full synthetic oil like 5W-30, which meets the original JLR specifications for optimal performance. The forums often advise against cheap mineral oils, as they can damage the turbocharger. I also pay attention to environmental factors—if you live in a cold area, oil with good low-temperature fluidity is crucial; 5W-30 works well in summer. Castrol Edge is a great brand, effectively cleaning engine deposits. It's best to change the oil every 7,500 kilometers, adjusting the interval based on driving data—shorter for more highway driving. When changing the oil, remind the technician not to add unnecessary additives; pure oil is sufficient. Also, check the oil level monthly—a simple habit that can prevent major issues, ensuring safety and peace of mind.

Was this review help?
2
1
Share
Expand All
BradyMarie
12/07/25 4:33am

For Jaguar XJ maintenance, I insist on using full synthetic 5W-30 engine oil. The manual is the gold standard—never arbitrarily change viscosity to avoid damaging precision components. High-quality oil enhances engine efficiency, reduces noise, and saves money long-term. Recommended oil change interval is approximately every 8,000 kilometers; choose reputable brands to ensure quality. Monitor oil temperature fluctuations and avoid overloading. Prioritize simplicity and practicality to ensure smooth driving.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

How to Remove the Evaporator Box of a Toyota Camry?

Toyota Camry's evaporator box is located inside the dashboard. To remove the evaporator box assembly, it is necessary to dismantle the dashboard, inner beam, steering wheel, blower assembly, wiring harness, and other components before disassembling and extracting the evaporator box. The evaporator box is a crucial component among the four major parts of the refrigeration system. Its function is to allow low-temperature condensed gas to pass through the evaporator, exchange heat with the outside air, liquefy and absorb heat, thereby achieving a cooling effect. The evaporator box consists of a box, tubes, and fins. The tubes pass through the fins, forming small channels with excellent heat transfer efficiency. When air flows through the evaporator, the moisture in the cooled air condenses and adheres to the fins, turning into small water droplets that are collected in the drip tray and discharged outside the vehicle through the drain pipe.
9
3
Share

How long can you stay at a highway service area?

Highway service areas do not impose time limits on rest periods, but expressways have overtime fees, which are part of a nationwide highway network's measures to prevent violations such as toll evasion through card swapping. Most expressways in the country have implemented procedures for handling overtime driving. However, time spent resting in service areas or delays due to traffic accidents can be deducted. According to the Road Traffic Safety Law, the minimum speed limit on China's expressways is generally 60 km/h, which already provides drivers with ample time, accounting for rest breaks and refueling. If a driver requires more time for rest or is delayed due to refueling or vehicle repairs, as long as they can provide corresponding receipts or proof verified by the toll station, it will not be counted as overtime.
15
5
Share

What are the 5 taboos for breaking in a new automatic transmission car?

New automatic transmission car break-in 5 taboos: 1. Avoid coasting in neutral; 2. Avoid sudden acceleration; 3. Always ensure the vehicle is completely stopped before shifting into R or P gear; 4. Avoid launch starts; 5. Avoid using sport mode. During the break-in period, it's crucial to use the transmission correctly and prevent the engine from operating in excessively high RPM ranges. All vehicles actually bear greater loads when driving at low speeds compared to moderate speeds, hence prolonged break-in below 60 km/h is not advisable - speed should be gradually increased. Conversely, if the entire break-in is completed at a constant 80 km/h and speed is suddenly increased afterward, it may cause adaptation issues for the new car.
19
3
Share

What are the new regulations for driver's license renewal in 2020?

2020 driver's license renewal regulations: The vehicle management office shall use the Internet traffic safety comprehensive service management platform to handle motor vehicle driver's license business in accordance with regulations; applicants who use the Internet traffic safety comprehensive service management platform to handle motor vehicle driver's license business can submit applications online after identity verification. There is a latest deadline for driver's license renewal. First, the owner can go to handle it within 90 days before the expiration date, and the deadline is less than one year after expiration; if it expires for more than one year but less than three years, the driver's license will be canceled, and the renewal can be processed normally by passing the subject one exam; if it expires for more than three years, the driver's license will be invalid and cannot be renewed.
20
1
Share

What causes the jerking sensation when parking an Audi A6?

Audi A6 may experience jerking sensations when parking due to suspension system failure or sudden braking. The specific reasons are as follows: Suspension system failure: The front wheel shock absorbers are in a compressed state, while the rear wheel shock absorbers are in an extended state, creating a nose-down posture. When the car comes to a complete stop, the front and rear springs return to their original positions, causing the front of the car to lift slightly and the rear to lower, resulting in a jerking sensation. Increasing the stiffness of the front suspension can solve this problem. Sudden braking: Jerking sensations may occur during sudden braking. Try to avoid sudden braking and slow down gradually when stopping.
8
1
Share

How is liability determined in a chain-reaction rear-end collision?

Methods for determining liability in chain-reaction rear-end collisions: The first vehicle is usually not at fault, while the last vehicle is typically deemed primarily responsible; if the rear-end collision is caused by the first vehicle's traffic violations, such as illegal reversing on the highway or forced lane changes, then the first vehicle may also be held liable. For chain-reaction collisions involving five or more vehicles, the accident can be divided into single incidents and judged as two-vehicle accidents. If there are discrepancies in the statements from multiple parties, compensation is usually determined based on the principle that the rear vehicle compensates for the damage to the front vehicle's rear and its own front. In cases of complex situations, liability is determined based on the actual circumstances of the collision.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.