What type of engine oil does the Haval H6 use?

1 Answers
AryaFitz
07/29/25 2:31am
Haval H6 uses 10W40 engine oil, also known as engine lubricant, which serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. The Haval H6 is a compact SUV with body dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, with a wheelbase of 2738mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 155 kW, with the maximum power achieved between 6000 to 6300 revolutions per minute, paired with a 7-speed dual-clutch transmission.
Was this review help?
1
4
Share
More Forum Discussions

What causes the EPS light to come on in a car?

This is an electronic power steering warning. EPS refers to the computer board of the car's steering wheel. If it lights up, it indicates a fault in the computer board. The EPS light indicates whether the vehicle's electronic and mechanical systems are functioning normally. Under normal circumstances, it should be off. When there is a fault or abnormality in the vehicle's electronic or mechanical systems, this light will illuminate. Do not take chances when this light comes on, as the vehicle's electronic and mechanical systems cover multiple parts of the car, and any malfunction in any part poses a safety hazard. The advantages of EPS are as follows: 1. High conversion efficiency: The Electronic Power Steering system, hereinafter referred to as EPS, is a mechanical and electrical connection with a conversion efficiency of up to 90%, whereas hydraulic systems only have a conversion efficiency of 60%. 2. Good steering returnability: EPS has a simple structure, low internal resistance, and excellent returnability, providing the best steering return characteristics and improving the car's handling stability. 3. Low energy consumption: For hydraulic steering systems, the hydraulic power pump operates continuously when the engine is running, increasing the engine load and raising the car's fuel consumption by about 4%. In contrast, EPS only activates the steering motor when steering is required, thereby reducing engine load and saving fuel.
1
1
Share

How Many Days Can Nail Polish Touch-Up Last?

How long nail polish touch-up can last mainly depends on the type and quality of the nail polish. The duration varies, but typically it only lasts for a few days. Nail polish has a certain corrosive effect on car paint, as it is essentially made from nitrocellulose combined with chemical solvents such as acetone, ethyl acetate, ethyl lactate, and phthalic anhydride. Below are the methods for treating car paint surface scratches: Light Scratches: For light scratches, simply prepare a tube of toothpaste. Toothpaste is highly effective for shallow scratches that do not damage the car's primer. Hairline Scratches: Hairline scratches can generally be removed by polishing or applying a rubbing compound. A gentle wipe is usually enough to make the hairline scratches disappear. Moderate Scratches: Moderate scratches cannot be repaired by polishing. For small dents not exceeding 5mm, they can be leveled by filling with putty before applying touch-up paint. Deep Scratches: More severe deformations require bodywork (panel beating). Scratch repair demands high technical skills from the technician. With advanced techniques, your beloved car can be restored to its original appearance in the shortest time possible.
4
0
Share

Where is the cabin air filter located in a BMW E38?

The cabin air filter in a BMW E38 is located in the engine compartment. Relevant information about the BMW E38 is as follows: 1. The BMW E38 refers to the BMW 7 Series produced from 1994 to 2001, which was completely discontinued by October 2019. E38 is the chassis code designation. 2. The E38 has body dimensions of 4984mm*1862mm*1425mm, with engine options including 6-cylinder, 8-cylinder, and 12-cylinder variants. The 8-cylinder engine delivers a maximum horsepower of 286 hp. 3. The BMW E38 features new design elements in both the front fascia and rear end, with several changes compared to the 2002 E32 model. Externally, the traditional kidney grille was widened and heightened, while the hood contours became more pronounced. Xenon headlights became standard equipment, and the bumper was redesigned to complement the front-end styling improvements.
9
4
Share

What Causes the Squeaking Noise When Turning the Steering Wheel in Wuling?

Here are the reasons for the squeaking noise when turning the steering wheel in Wuling: 1. Faulty Clock Spring: If the sound comes from inside the steering wheel, it may be caused by interference from the clock spring inside the steering wheel. 2. Lack of Lubrication in Shock Absorber Top Bearing: When turning the steering wheel, if the noise comes from outside the vehicle, it may be due to the lack of lubrication in the shock absorber's top bearing. If this is the case, applying some grease can resolve the issue. 3. Loose Stabilizer Bar Bushings: If the noise does not come from the shock absorber's top bearing, check whether the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings not only cause noise when turning the steering wheel but also produce sounds when driving on uneven roads. Loose stabilizer bar bushings can be fixed by adding shims. 4. Dirty Power Steering Fluid: If the power steering fluid is too dirty, it will increase the pressure in the power steering system. In this case, the power steering fluid should be replaced promptly.
18
1
Share

Why does the BMW 525li air conditioning not cool?

BMW 525li air conditioning not cooling is due to lack of refrigerant. Here is extended information about air conditioning: 1. Meaning: The air conditioning system mainly compresses gaseous refrigerant into high-temperature and high-pressure gas through the compressor, which then flows through pipes into the condenser. Inside the condenser, it dissipates heat and cools down through the cooling fan, condensing into high-pressure liquid refrigerant that flows out. 2. Refrigerant: The high-pressure liquid refrigerant enters the dryer reservoir through pipes, where it is dried and filtered before flowing into the expansion valve for throttling. Its state changes dramatically, turning into low-temperature and low-pressure liquid refrigerant that enters the evaporator. Inside the evaporator, it absorbs heat from the air flowing through, lowering the air temperature and blowing out cold air, creating a cooling effect. The refrigerant itself evaporates into low-temperature and low-pressure gaseous refrigerant due to absorbed heat, which is then sucked into the compressor through pipes for compression. As long as the compressor works continuously, the refrigerant circulates continuously in the air conditioning system, producing a cooling effect. When the compressor stops working, the refrigerant in the system stops flowing, and no cooling effect is produced.
11
0
Share

Where to Buy Honda CB400?

To purchase a Honda CB400, you can buy it from an authorized dealership or contact other owners directly to purchase a used one. The Honda CB400 is a four-cylinder street bike produced by Honda, which is smaller and more agile. Here are some relevant details about the Honda CB400: 1. The Honda CB400 has a length, width, and height of 2040mm, 725mm, and 1070mm respectively, with a wheelbase of 1410mm. The seat height is 755mm, the minimum ground clearance is 130mm, and the motorcycle's net weight is 170kg. 2. The Honda CB400 is equipped with a 400cc four-cylinder engine, delivering a maximum output power of 53 horsepower and a maximum torque of 3.9kg/m. The frame is a high-tensile steel cradle frame, and the transmission system is a wet multi-plate 6-speed chain drive. The front and rear suspension consists of 41mm telescopic hydraulic front forks and dual-tube hydraulic shock absorbers, while the front and rear brakes are dual discs with 4-piston calipers and a single disc with dual-piston calipers.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.