What type of engine oil does the Envision use?

2 Answers
Sadie
07/25/25 1:42am
The Envision uses 5W-30 full synthetic engine oil, requiring approximately 5.4L during maintenance. According to the Buick Envision's maintenance manual, servicing is required every 5,000 kilometers. Introduction to the Envision: 1. The Envision has dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. 2. The Envision is available in both two-wheel drive and four-wheel drive versions, featuring a front-engine, four-wheel-drive layout with an on-demand four-wheel-drive system. The front and rear brake types are ventilated disc and disc, respectively, with an electronic parking brake.
Was this review help?
5
4
Share
MatteoDella
08/10/25 4:14pm
I usually study car lubrication systems. The Buick Envision comes standard with 5W-30 full synthetic oil, which is reliable in both cold and hot environments. The key is to choose oil with dexos1 certification, as it efficiently lubricates Turbo engine components, reducing wear and extending lifespan. The recommended oil change interval is every 5,000 to 7,500 miles or every six months, with driving habits affecting the frequency: city traffic requires more frequent changes, while highway driving is more economical. Don’t randomly change oil specifications—the manual clearly states to avoid mineral oil because the Envision’s engine is precise; ignoring this may lead to high oil temperatures and significantly increased noise. Regularly check oil levels, as using the wrong oil can easily cause malfunctions, costing money and damaging the car. Choose big brands like Shell or Mobil for peace of mind.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Reasons Why the Car Air Conditioning Compressor Clutch Does Not Engage

There are many factors that can cause the car air conditioning compressor to fail to engage. Below are the reasons why the car air conditioning compressor clutch does not engage: 1. Compressor wiring issues: The most common reason is often related to compressor wiring problems. Most technicians will use a jumper wire across the compressor pins to check if the wiring is functioning properly. By disconnecting the power to the compressor relay and jumping the compressor pins, the compressor can be forced to engage. 2. Damaged temperature sensor or temperature control sensor: If the intake air temperature sensor or temperature control sensor in the air conditioning system is damaged, it cannot detect the temperature, and the electrical signal cannot be transmitted. As a result, the compressor cannot perform the engagement action. In this case, simply replacing the temperature control sensor will resolve the issue.
4
4
Share

Where is the rear wiper switch for Audi A6?

Push the wiper lever switch to the default position for the car. When the vehicle detects increased rainfall, the wipers will automatically activate. Wipers are generally divided into two types: 1. Rain-sensing: Rain-sensing wipers use sensors on the windshield to detect the amount of rainfall and then automatically control the wiper speed through the computer system. 2. Speed-sensing: Speed-sensing wipers adjust the wiper speed based on the vehicle's driving speed. Between the two, rain-sensing is more scientifically advanced, effectively ensuring driving safety in rainy conditions. To prolong the lifespan of the components, always use genuine windshield washer fluid.
18
1
Share

What brand is the MG transmission?

MG transmissions are jointly developed by SAIC and General Motors. The TST dual-clutch transmission is a dry dual-clutch transmission (DCT) type, which eliminates the need for related hydraulic systems, making it lighter overall compared to wet dual-clutch transmissions. Additionally, the dry clutch itself offers high torque transmission efficiency, significantly improving fuel economy. MG transmissions use either a 6-speed manual transmission or the new-generation 7-speed DCT280 wet dual-clutch transmission. A manual transmission is a gear-shifting device used to alter the engine's speed and torque delivered to the drive wheels, enabling the vehicle to achieve different traction forces and speeds under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating. When using MG transmissions in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Although many modern vehicles feature maintenance-free transmission fluid, "maintenance-free" does not mean it never needs replacement. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While many experienced drivers coast in neutral when driving manual transmission vehicles, doing so in an automatic transmission can cause overheating and produce a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, aiming for "smooth" operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and lead to issues like gear grinding over time. Avoid frequently using Drive (D) for steep hill climbs. On steep inclines, automatic transmission vehicles may overheat due to high load or shift too early, resulting in insufficient climbing power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move it onto the tow platform while the vehicle is in Neutral (N). Avoid using tow ropes or towing the vehicle directly.
3
0
Share

What is the Octavia?

As the first sedan under the Shanghai Volkswagen Skoda brand, the Octavia is an advanced model synchronized with Europe. Below is relevant information about this vehicle: 1. Introduction: The Skoda Octavia, as the first sedan of the SAIC Volkswagen Skoda brand, is an advanced model synchronized with Europe. It has undergone extensive localization improvements tailored to the Chinese market and was successfully launched domestically on June 6, 2007. 2. Product Highlights: The exterior design is simple and elegant. The vehicle adopts Skoda's new family design language, showcasing a simple, fashionable, and sophisticated styling. The details are accentuated with exquisite touches, among which the most eye-catching feature is the integrated panoramic sunroof with black trim. The black elements extend from the front of the roof to the middle, and the extended full-open design creates excellent visual continuity and enhances cabin brightness.
11
0
Share

What do the warning lights on the Great Wall Wingle 5 mean?

Here are the names and meanings of various warning lights on the Great Wall Wingle 5: 1. Master Warning Light: This is an alert indicator. If multiple information displays on the dashboard show warning messages, the master warning light will flash or stay lit. When this light is on, the driver can check the alarm information displayed on the multiple information displays to understand the vehicle's condition. 2. Charging System Warning Light: This light indicates a fault in the vehicle's charging system. It lights up when the power is turned on and goes off after the engine starts. If the light remains on after the engine starts, it means there is a fault in the charging system, and the battery should be checked immediately to avoid the embarrassment of not being able to start the engine. 3. SRS Warning Light: This indicator shows the status of the airbag or seatbelt pretensioner system. It lights up when the power is turned on and goes off after the vehicle's self-check is completed. If the light stays on, it indicates a fault in the airbag or seatbelt pretensioner system, which should be inspected and repaired immediately. 4. Engine Fault Indicator Light: This light indicates the status of the engine. It lights up when the power is turned on and goes off after about 3-4 seconds if the engine is normal. If the light comes on after the engine starts, it means there is a fault in the engine, and it should be repaired promptly. 5. Tire Pressure Warning Light: This light primarily monitors the tire pressure of the vehicle. If a tire is underinflated, the light will come on to enhance vehicle safety and prevent further tire wear.
10
3
Share

What does a lock and a car symbol on the dashboard indicate as a fault?

A lock and a car symbol on the dashboard indicate the normal operation of the engine anti-theft device. Below is relevant information about the car dashboard: 1. Introduction: The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Dashboards vary between different car models. However, conventional car dashboards typically include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge, among others. 2. Notes: Normally, the brightness of the dashboard does not require manual adjustment; it automatically adjusts based on the intensity of external ambient light.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.