What type of engine oil does the Changan Raeton CC use?

2 Answers
McAndres
07/28/25 3:34pm
sn-level 5w30 viscosity grade full synthetic engine oil is the type used in the Changan Raeton CC. If you want to change the oil during later maintenance, you can choose brands such as Mobil or Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car in low temperatures. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better the oil maintains its viscosity index at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Changan Raeton CC is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply some oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover. Generally, fill about three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
Was this review help?
7
5
Share
AlexaDella
08/11/25 10:55pm
The car I drive is the Changan Raeton CC, and I've been using 5W-30 synthetic oil for almost three years now, as clearly recommended in the manual. At first, I didn't understand much about engine oil and thought any type would do, but I noticed a slight increase in fuel consumption. Later, after carefully reading the manual, I realized that the Raeton CC's engine requires this specific viscosity because it ensures smooth cold starts, preventing freezing in winter, and provides excellent protection at high temperatures, so I don't have to worry about overheating during summer highway drives. I use a reputable brand of semi-synthetic oil, changing it every 7,500 kilometers, and I regularly check the dipstick to ensure the oil level is normal. Choosing the right oil is crucial—otherwise, engine wear accelerates, leading to costly and troublesome repairs. Remember, the manual is the best guide; don't rely on guesswork or past experiences.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

How to Check the Vehicle Owner's Name?

Open the browser and enter "Online Vehicle Management Office" in the search box, then click search. After searching, locate the driver information query section on the website and click to enter. Enter the vehicle's information and click query to view the owner's name.
20
0
Share

How to Check Detailed Information of Large Vehicles?

First, open Baidu on your computer desktop, enter 'vehicle green book information query' in the search box, and click to proceed. Then, click 'Query Now', and finally, enter the vehicle information and click the query button below to obtain the details.
17
0
Share

How to Check if a Vehicle Needs Inspection?

Log in to the local traffic police website, click on the vehicle information inquiry, and enter the license plate number and engine identification code to check. Bring your ID card, vehicle registration certificate, and driver's license to the vehicle management office or traffic violation processing hall for inquiry.
5
0
Share

What is the standard tire pressure for the Geely Boyue?

The normal tire pressure range for the Boyue is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. To check the current tire pressure of the Boyue during daily driving, you can activate the tire pressure monitoring system, and the tire pressure values will be displayed on the central LCD screen of the instrument panel. The tire pressure monitoring button for the Boyue is located at the top of the lever under the steering wheel on the left side, marked with a round button. Simply switch to the tire pressure monitoring system interface. Generally, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of over-inflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of under-inflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to come on. Simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors tire pressure. If the sensor is damaged during driving, it will trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new one.
14
3
Share

How to eliminate the flashing AFS light on an old Camry?

AFS OFF light indicates that the headlight's adaptive front-lighting system (AFS) is turned off. Press the switch button located above the brake pedal to activate the intelligent adaptive front-lighting system. Inspect the AFS module, use a decoder to match and set the system, and clear the fault code to eliminate the AFS warning light. Disconnect the headlight power supply, ensure the vehicle's power is off, then open the engine hood, locate the battery's negative terminal, disconnect and reconnect it.
6
5
Share

How to Determine if the Car Air Conditioning Pump is Faulty?

The air conditioning does not cool, and the engine speed does not increase when the AC switch is turned on. Check if the compressor's working voltage is sufficient. If not, there is a circuit fault; if it is sufficient, then the compressor is faulty.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.