What type of engine oil does the Baojun 530 use?

Does ABS/ESC Malfunction Need Repair?

ABS/ESC malfunction refers to a failure in the vehicle's electronic stability control system and anti-lock braking system, which requires timely repair at a 4S shop or auto repair shop. Below is an introduction to the anti-lock braking system: System Function: During vehicle braking, it automatically controls the braking force to prevent wheel lock-up, maintaining a state where the wheels are both rolling and slipping (with a slip ratio of about 20%) to ensure maximum adhesion between the wheels and the road. Working Principle: When the two rear wheels are controlled together based on the low-select principle, it ensures equal braking force on both rear wheels under various conditions. Even if the adhesion coefficients of the two wheels differ significantly, the braking force on both wheels is limited to the level of the wheel with lower adhesion, keeping the braking force balanced between the two rear wheels and ensuring good directional stability during braking under all conditions.

12

5

Share

Is it necessary to go to a 4S shop for new car scratches?

New car scratches can be repaired outside. For vehicle scratches, paintwork, sheet metal, and decorative parts repairs, as well as replacements, installations, and modifications, it is not recommended to go to a 4S shop. Not only are their charges high, but some services are not up to standard. More importantly, repairs like paintwork and decorative parts generally do not affect vehicle performance, such as the engine, braking, electrical circuits, and steering systems. Here are some details: When the scratch is shallow: If the primer is not damaged. In this case, you can choose not to repaint, as such scratches are barely noticeable unless closely inspected, and not damaging the primer has little impact on the car. Simply applying wax to the scratch can effectively reduce its appearance. When the scratch is deep: But the scratched area is not a metal part. In this situation, the impact is still minimal because losing a layer of paint on plastic components does not matter; if the scratched area is a metal part, repainting is necessary. Once the protective paint layer on the body steel plate is lost, exposing the steel to air can easily lead to corrosion and rust, causing rapid aging of the paint and severe damage to the appearance.

6

3

Share

How Much Does a Motorcycle Generally Weigh?

Ordinary motorcycles weigh between 150 kg and 250 kg, generally depending on displacement, style, and brand. Below is a detailed introduction about motorcycles: Introduction to Motorcycles: A motorcycle is a flexible and fast means of transportation, powered by a gasoline engine, with handlebars to steer the front wheel, typically two-wheeled or three-wheeled, offering agility and speed. A motorcycle consists of five main parts: the engine, transmission system, running gear, steering, braking system, and electrical instrumentation. Classification of Motorcycles: Generally, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. Uses of Motorcycles: Motorcycles can be used for military purposes, sports competitions, and as sports equipment, as well as widely employed for patrols, passenger and cargo transportation, etc.

6

4

Share

What is the appropriate speed for downshifting from third gear to second gear?

When downshifting from third gear to second gear, it is generally recommended to maintain a speed of around 25 km/h. Here are some important considerations for gear shifting: Avoid looking down at the gearshift: Novice drivers, unfamiliar with gear positions and concerned about skipping gears, may instinctively look down at the gear lever during shifting. This can easily cause the vehicle to deviate from its intended path, posing a potential hazard at higher speeds. Proper clutch coordination: Whether using the double-clutch shifting method or the single-clutch shifting method, it is crucial to fully depress the clutch pedal when shifting. Prioritize speed control: Gear shifting should be determined by the vehicle's speed. To minimize mechanical wear during downshifting, it is advisable to use the double-clutch method.

13

2

Share

What is the maximum allowable total mass for a three-axle vehicle?

For a three-axle truck, the maximum allowable total mass limit for road travel must not exceed 25 tons, and for a three-axle articulated vehicle, the total mass must not exceed 27 tons. The following are the hazards of overloading and exceeding limits: Damage to road facilities: Vehicle overloading severely damages road infrastructure, leading to pavement damage, bridge fractures, and a significant reduction in service life. High risk: Increased mass leads to greater inertia, longer braking distances, and higher risks, potentially causing various accidents. Operational errors: Drivers operating overloaded vehicles often experience increased psychological stress and mental pressure, making them prone to operational errors, affecting driving safety, and causing traffic accidents.

3

1

Share

Should a Tire Be Repaired if the Puncture Doesn't Go All the Way Through?

This depends on the situation. If the nail is deeply embedded and there's no air leakage, it's still recommended to repair it because the depth of the puncture has already compromised the tire's integrity. Initially, there may be no air leakage, but over time and under the pressure of the tire, it will eventually start to leak. If the nail is shallowly embedded, there's no need for repair as the depth isn't sufficient to damage the tire's integrity. Below are the functions of car tires: 1. Tires serve as the medium for transmitting forces between the vehicle and the road surface, including driving force, braking force, and steering force, thereby enabling the vehicle's driving, braking, and steering operations. 2. Supporting the vehicle's load. The vehicle's load causes the tire to compress until the average pressure on the tire's contact area balances with the internal inflation pressure. 3. Reducing and absorbing vibrations and impacts during driving to prevent early damage to vehicle components from severe vibrations. Additionally, they adapt to high-speed driving conditions, reduce driving noise, and ensure safety, comfort, handling stability, and fuel efficiency.

14

5

Share

What type of engine oil does the Baojun 530 use?

Does ABS/ESC Malfunction Need Repair?

Is it necessary to go to a 4S shop for new car scratches?

How Much Does a Motorcycle Generally Weigh?

What is the appropriate speed for downshifting from third gear to second gear?

What is the maximum allowable total mass for a three-axle vehicle?

Should a Tire Be Repaired if the Puncture Doesn't Go All the Way Through?

What is the reason for the EPC light being on and the accelerator pedal not responding?

Can New Energy Vehicle Charging Piles Get Wet in the Rain?

Does new car insurance include water damage coverage?

What is the top speed of the GSX250?