What type of engine oil does Infiniti use?

1 Answers
PrestonLynn
07/30/25 3:19am
Infiniti uses fully synthetic engine oil with the specification 5W40, with a replacement capacity of 4L and a replacement interval of 10,000 kilometers. In 5W40, the number 5 represents the low-temperature performance index - the smaller the number, the better the low-temperature fluidity, allowing use in lower environmental temperatures. The 'W' stands for winter, and 5W indicates a minimum operating temperature of -30 degrees Celsius. The number 40 is the viscosity index - the larger the number, the higher the oil viscosity, enabling use in higher environmental temperatures. Infiniti is a luxury vehicle brand under Nissan Motor Company. The oval logo of this brand represents an infinitely extending road: the elliptical curve signifies infinite expansion and also symbolizes the world; the two straight lines represent the path to the pinnacle, symbolizing endless development.
Was this review help?
6
1
Share
More Forum Discussions

Where is the water pump located on the Nissan Teana?

The water pump of the Nissan Teana is situated at the front pulley of the engine. Automotive engines commonly utilize centrifugal water pumps. Its fundamental structure consists of components such as the water pump housing, connecting plate or pulley, water pump shaft and bearings or integrated shaft bearings, water pump impeller, and sealing device, making it a crucial part of the vehicle. The Nissan Teana is a flagship mid-to-high-end luxury sedan under the NISSAN brand, with body dimensions measuring 4850mm in length, 1795mm in width, and 1475mm in height. In terms of exterior design, the car adopts Nissan's family-style appearance, featuring a front fascia similar to the Sylphy and incorporating Infiniti's dynamic design elements into its body lines, further accentuating its fashionable and sporty appeal.
5
4
Share

What is the emission standard of Dongfeng Peugeot 3008?

Dongfeng Peugeot 3008 meets the China V emission standard. In terms of power, this vehicle is equipped with a 1.6T turbocharged engine. Vehicle emission standards are established to control pollutant emissions from automobiles. With the continuous development of automotive production technology, the number of vehicles in use is also increasing. The reason for implementing emission standards is primarily to reduce harmful gas emissions, inhibit the generation of harmful gases, and protect China's atmospheric environment. The Dongfeng Peugeot 3008 is a compact SUV, with body dimensions of 4435mm in length, 1840mm in width, and 1652mm in height, and a wheelbase of 2613mm.
20
5
Share

How to adjust the height of the Chevrolet Cruze clutch?

The method to adjust the height of the Chevrolet Cruze clutch is as follows: 1. Locate the clutch master cylinder behind the clutch pedal and remove it; 2. The adjustment part is the push-pull rod, which has a notch. Insert a small wrench into the notch to rotate the rod; 3. Use another wrench to loosen the positioning nut on the rod. After loosening the nut, adjust it to the end of the thread, then rotate the rod; 4. During adjustment, turn the rod by hand to gradually shorten it, then tighten the positioning nut. The dimensions of the Chevrolet Cruze are 4666mm in length, 1807mm in width, 1460mm in height, with a wheelbase of 2700mm.
19
0
Share

What Happens If You Stuff a Steel Wool Ball into a Car's Exhaust Pipe?

Stuffing a steel wool ball into a car's exhaust pipe can prevent the engine from starting normally. The exhaust pipe is designed to expel the waste gases produced after engine combustion. Therefore, blocking the exhaust pipe will affect its smooth operation and interfere with the engine's normal functioning. A car's exhaust pipe consists of three sections: the front pipe, the midpipe, and the tailpipe. The front pipe, also known as the exhaust manifold, is visible when you open the engine hood. The exhaust manifold is equipped with a catalytic converter, which reduces the levels of pollutants in the exhaust gases. The catalytic converter is a crucial component for the vehicle. The midpipe is the longer section located under the car's chassis, while the tailpipe is the part near the rear bumper.
7
5
Share

What is the fuel consumption per 100 kilometers for the Lavida XR?

The Lavida XR has a total of 8 models, with an official fuel consumption of 5.1-6.9L per 100 kilometers. The fuel consumption for different models is as follows: Lavida XR-2017-1.6L-Automatic Comfort Edition and Fashion Edition, equipped with a 110 horsepower engine, have an NEDC fuel consumption of 6.9L per 100 kilometers. Lavida XR-2017-1.6L-Manual Comfort Edition and Fashion Edition, equipped with a 110 horsepower engine, have an NEDC fuel consumption of 6.2L per 100 kilometers. Lavida XR-2017-180TSI-DSG Comfort Edition, equipped with a 110 horsepower engine, has an NEDC fuel consumption of 5.1L per 100 kilometers. Lavida XR-2017-230TSI-DSG Luxury Edition and Comfort Edition, equipped with a 131 horsepower engine, have an NEDC fuel consumption of 5.3L per 100 kilometers. Lavida XR-2017-230TSI-Manual Comfort Edition, equipped with a 131 horsepower engine, has an NEDC fuel consumption of 5.7L per 100 kilometers. The fuel tank capacity for all Lavida XR models is the same, at 55L. The distance that can be covered with a full tank of fuel is as follows: 2017-1.6L-Automatic Comfort Edition and Fashion Edition: 55/6.9*100=797km. 2017-1.6L-Manual Comfort Edition and Fashion Edition: 55/6.2*100=887km. 2017-180TSI-DSG Comfort Edition: 55/5.1*100=1078km. 2017-230TSI-DSG Luxury Edition and Comfort Edition: 55/5.3*100=1037km. 2017-230TSI-Manual Comfort Edition: 55/5.7*100=964km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, will increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
4
0
Share

Is it acceptable to have a license plate ending with 0?

Having a license plate ending with 0 is acceptable. The last digit of a vehicle's license plate is determined by the local vehicle numbering system and can be any digit from 0 to 9 or any letter from A to Z, which makes no difference in terms of vehicle usage. However, if there are local traffic restriction policies based on plate numbers, 0 would be considered an even number. The Chinese character at the beginning of a license plate represents the province or municipality directly under the central government, while the letter following the Chinese character denotes the city or district. By looking at the letters or numbers at the front of the license plate, one can identify which city the vehicle belongs to. A license plate, also known as a vehicle registration plate, is a metal or plastic plate attached to both the front and rear of a vehicle, displaying the vehicle's registration number, registration region, and other basic information.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.