What type of driver's license can be added to a C license?

1 Answers
VanMiranda
07/29/25 7:06pm
C license can be upgraded to a B2 license. Here are the relevant details: 1. Permitted vehicle types: A C1 driver's license only allows driving small cars with a total mass not exceeding 4.5 tons, seating capacity (including the driver) not exceeding 9 people, or vehicles with a length under 6m. It also permits driving C2 automatic transmission vehicles, C3 low-speed trucks (formerly four-wheel agricultural transport vehicles), and C4 three-wheeled vehicles (formerly three-wheel agricultural transport vehicles). 2. B2 driver's license: Age requirement: 21~50 years old. Upgrade conditions: You can directly apply for the B2 license, or upgrade to a B2 license if you have held any driver's license for at least 1 year and have not accumulated 12 penalty points in the most recent scoring cycle. Permitted vehicle types: C1, C2, C3, C4, M.
Was this review help?
10
5
Share
More Forum Discussions

What is a Nardi car?

Nardi is an Italian car brand. Founded in 1946, Nardi initially gained global recognition for producing motorcycles and parts, and later became widely popular among consumers for its renowned steering wheels. Here is an introduction to Nardi: 1. Nardi Steering Wheels: The classic steering wheels under the Nardi brand have been selected as suppliers for major automobile manufacturers such as Ferrari, Lancia, Audi, Maserati, Lamborghini, Rolls-Royce, Jaguar, Volkswagen, Abarth, and BMW over the years. 2. Brand Series: Nardi steering wheels include the Classic series, composed of black leather and black spokes with a black stitched leather rim; the Leader series, made of black and silver leather, black spokes, and an aluminum-chromed rim; and the Kallista series, featuring black leather and perforated black leather, ABS inserts, polished spokes, and an aluminum alloy rim.
7
3
Share

Is Ceramic Forged Wheel Hub a Large Manufacturer?

Ceramic Forged Wheel Hub factory is not a large manufacturer. Here is the specific introduction of automobile wheel hub: 1. Working method: The wheel hub bearing unit adopts the combination of bearing unit and anti-lock braking system. The wheel hub unit is designed with inner and outer flanges. The inner flange is fixed to the drive shaft with bolts, and the outer flange assembles the entire bearing together. 2. Wear impact: Worn or damaged wheel hub bearings or wheel hub units can cause high-cost failures during vehicle operation, and even pose safety hazards. 3. Upgrade: The most common way to upgrade automobile wheel hubs is to replace them with aluminum alloy rims, or to use larger wheel hubs to improve vehicle performance and appearance.
17
0
Share

Do New Energy Vehicles Have Radiation? What's the Truth?

As long as it is an electrical device, there will be electromagnetic radiation. New energy vehicles, mainly electric vehicles, are driven by electricity. However, electric vehicles produced by regular manufacturers must comply with national standards and undergo strict testing by national agencies, including electromagnetic radiation testing. Only those that meet the requirements can be sold and used. More relevant information is as follows: 1. Introduction: The radiation produced by new energy vehicles is mainly electromagnetic radiation. However, it's not just new energy vehicles; even traditional fuel-powered vehicles have electromagnetic radiation because they are filled with various electronic devices. 2. Drive: The driving force of electric vehicles is lithium batteries. As is well known, connecting lithium batteries in series will cause the voltage to add up, and the increased voltage will also enhance the thermal effect, leading to instability in the internal structure. Therefore, manufacturers avoid having the voltage of lithium batteries too high. The solution is to connect dozens of small lithium batteries in series to provide the basic working voltage, and then connect several groups of batteries in parallel to provide high current.
8
4
Share

Will the Car Stall When Starting in Second Gear?

Whether the car stalls when starting in second gear depends on the driver's clutch operation and the engine's RPM. If the clutch and RPM are not properly managed, the car is likely to stall; otherwise, it won't. Below is some relevant information about car starting: 1. Precautions: When accelerating from a standstill, avoid pressing the accelerator pedal too hard continuously, as this will only increase the RPM, causing the engine to roar and the transmission to wear, leading to unnecessary fuel waste. 2. Correct Method: Gently press the accelerator pedal, use low-speed downshifting to increase torque for acceleration, and gradually and evenly increase speed. Once the speed has increased, you can accelerate further. This method will make driving an automatic transmission car feel smoother.
10
4
Share

Does the MINI automatically lock after the driver leaves?

If the car is locked using the remote control and the unlock button is accidentally pressed without anyone actually opening the door, it will automatically relock within a short period. However, if someone opens the door, the automatic relocking function will be disabled. Relevant information about the automatic locking function is as follows: 1. Introduction: The automatic locking function of motor vehicles activates when the vehicle reaches a certain speed, automatically locking the doors. 2. Purpose: It prevents children from opening the rear doors during transit, avoiding unnecessary traffic accidents. It also safeguards against potential robberies by preventing doors from being opened when the vehicle is stopped at traffic lights.
3
4
Share

How many points are deducted for stopping midway during parallel parking?

Stopping midway during the parallel parking exercise deducts 5 points. Below are detailed explanations of common point deductions for the parallel parking test in Subject 2: 1. Driving too slowly: Many learners reduce speed excessively for fear of missing reference points, leading to stalling. 2. Unfamiliarity with clutch: Not testing the clutch's sensitivity before driving results in discomfort during the test. 3. Incorrect seat adjustment: Improper seat positioning affects the driver's posture and visibility, causing misalignment with reference points and potential line crossing. 4. Right turn signal: Previously only requiring a left turn signal when starting to park, the new regulations now penalize learners who forget to activate the right turn signal before reversing.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.