What type of car is the Lavida Cross?

What is the method for adjusting the temperature of a car's air conditioning system?

Car air conditioning temperature adjustment method is: 1. Locate the temperature button on the car's air conditioning control panel; 2. Turn towards the blue direction for cooling, and towards the red direction for heating. The components of car air conditioning are: 1. Compressor; 2. Condenser; 3. Evaporator; 4. Receiver-drier; 5. Expansion valve. The functions of car air conditioning are: regulating the temperature, humidity, air cleanliness, and air flow within the car cabin. The working principle of car air conditioning heating is: when the car's engine coolant temperature becomes sufficiently hot, refrigerant gas enters the condenser, where pressure and temperature decrease, causing the refrigerant gas to condense into liquid and release heat.

9

5

Share

Where Do Cars Usually Leak Oil?

Car oil leaks typically occur at the brakes, front and rear axle oil seals, engine oil pan, shock absorbers, and other locations. The details are as follows: Brake fluid leak locations: Brakes are different from other components. Any sign of oil seepage should raise immediate concern because brake fluid leaks directly impact driving safety. If the brakes fail, the consequences could be disastrous. Brake fluid leaks most commonly occur near the wheel at the brake bleeder valves, brake fluid reservoir, or brake pedal. Any abnormalities should be repaired promptly. Front and rear axle oil seal leaks: Oil seals are mechanical components designed to contain oil. If not installed properly, they can leak. Generally, the front crankshaft oil seal is more prone to leaks, while the rear crankshaft oil seal is less likely. Oil seals are wear-and-tear parts that degrade over time, leading to leaks as they age. Engine oil pan leaks: The engine oil pan is a common and potentially dangerous leak location. Leaks often occur when repair technicians fail to follow the maintenance manual's specified torque for tightening the oil pan bolts—whether due to insufficient tightening or excessive torque. If the leak is severe, oil can splash onto the hot exhaust system during driving, potentially causing a vehicle fire. Shock absorber leaks: Shock absorbers are prone to damage and often start leaking after tens of thousands of kilometers. Besides directly observing for leaks, you can also check the shock absorber's condition to determine if it's leaking. If a leak is detected, the shock absorber should be replaced.

17

4

Share

How to adjust the time on a Citroen C5?

To adjust the time on a Citroen C5, follow these steps: 1. Press the MENU button on the center console to access settings; 2. Use the up and down buttons on the steering wheel to adjust the time; 3. Press the confirmation button to save the settings. The Citroen C5 has the following dimensions: length 4805mm, width 1860mm, height 1458mm, with a wheelbase of 2815mm and a fuel tank capacity of 70 liters. It is equipped with a 1.6T turbocharged engine delivering a maximum power of 123kW and maximum torque of 245Nm, with peak torque available between 1400-4000rpm.

3

4

Share

What is the minimum passing score for Subject 2?

Subject 2 has a full score of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The following regulations apply for passing the exam: ① For applicants applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks, a score of 90 points is required; ② For other vehicle types, a score of 80 points is required. The C1 and C2 license tests include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope (canceled for C2), right-angle turns, and curve driving (commonly known as S-turns). Some regions also include a sixth item: highway card collection. The A1, A2, A3, B1, and B2 license tests include pile driving, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, curve driving, right-angle turns, passing through a limited-width gate, passing through continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulated highways, continuous sharp mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. If a candidate fails the Subject 2 exam on the first attempt, they can retake it once. If they do not take the retest or fail the retest, the exam process ends, and the applicant must reschedule the exam after ten days. During the validity period of the driving skill test permit, the number of rescheduling attempts for Subject 2 and Subject 3 road driving skill tests cannot exceed five. If the fifth rescheduled exam is still failed, the results of other previously passed subjects will be invalidated.

12

0

Share

How to Reset the Maintenance Indicator on a Volkswagen?

Methods to reset the maintenance indicator on a Volkswagen: 1. Insert the key; 2. Turn the key to the 'on' position, then press and hold the odometer button on the dashboard for more than 15 seconds while the engine is idling without releasing it; 3. Simultaneously press the brake and accelerator pedals, and wait for the maintenance light to flash; 4. After the maintenance light flashes three times, release the brake and accelerator pedals. The illumination of the maintenance indicator signifies that the vehicle requires servicing. After resetting the maintenance light, it is essential to service the car promptly to eliminate potential safety hazards. Car maintenance tasks include: 1. Changing the engine oil and oil filter; 2. Cleaning the air filter; 3. Replacing the brake fluid, transmission fluid, battery, throttle body, fuel injectors, and brake pads.

1

3

Share

Should the ETC chip face outward or inward?

Depending on the device model, the ETC chip may face inward or outward. A straightforward way to determine the correct orientation is to insert the card. If the balance is correctly displayed on the ETC device's screen, then the orientation is correct. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield. The chip should be inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If inserting and removing the card twice without attaching the electronic tag shows "Tag Invalid," this is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth directly. Turn on your phone's Bluetooth and open the corresponding mobile app (usually, a download QR code is provided on the electronic tag). Navigate to the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete the activation.

15

1

Share

What type of car is the Lavida Cross?

What is the method for adjusting the temperature of a car's air conditioning system?

Where Do Cars Usually Leak Oil?

How to adjust the time on a Citroen C5?

What is the minimum passing score for Subject 2?

How to Reset the Maintenance Indicator on a Volkswagen?

Should the ETC chip face outward or inward?

What is the fuel tank capacity of the Changan Honor?

What is the function of a car transmission?

Is Roewe a Joint Venture or Domestic Vehicle?

What is the appropriate tire pressure for the Haval H6?