What type of battery is BYD's battery?

What does ACCRES mean on a car?

RES on a car stands for the resume function of the cruise control system. Introduction to cruise control function: When the cruise control button is pressed, the car can maintain the set speed. The function is immediately canceled when the brake pedal is pressed. How cruise control works: The cruise control module reads the pulse signal from the vehicle speed sensor and compares it with the set speed, then sends commands to the servo mechanism to adjust the throttle opening to increase or decrease, ensuring the vehicle maintains the set speed. Range of adaptive cruise control: Adaptive cruise control is suitable not only for highway conditions but also for urban traffic with stop-and-go situations, while regular cruise control is only suitable for good road conditions, such as highways with light traffic.

3

4

Share

What is the difference between yellow solid lines and yellow dashed lines?

The differences between yellow solid lines and yellow dashed lines are as follows: Different purposes of setting: The purpose of yellow solid lines is to separate traffic moving in different directions, and sometimes to separate traffic moving in the same direction. They can serve as dividing lines or center lines; yellow dashed lines can also serve as dividing lines or center lines. Different functions: Yellow solid lines strictly prohibit vehicles from crossing or changing lanes; yellow dashed lines allow lane changes when used as dividing lines. Different locations: Yellow solid lines are generally painted in the middle of the road, with double yellow lines used on roads with multiple lanes and single yellow lines on roads with fewer lanes; yellow dashed lines are usually set on narrower roads to distinguish lanes moving in different directions, allowing crossing for overtaking or U-turns when safe.

4

1

Share

How to engage reverse gear in Wuling Hongguang S3?

The method to engage reverse gear in Wuling Hongguang S3 is: lift the gear lever and then shift into reverse. The Wuling Hongguang S3 is a 5-door, 7-seater mid-size SUV with body dimensions of: length 4655mm, width 1735mm, height 1790mm, wheelbase 2800mm, fuel tank capacity 49l, and curb weight 1440kg. The Wuling Hongguang S3 is equipped with a 1.5L turbocharged engine producing maximum power of 147PS (108kW), mated to a 6-speed manual transmission, featuring multi-point electronic fuel injection and electric power steering.

12

1

Share

What is the solution for Audi brake failure?

Audi brake failure solutions are: 1. Release the accelerator pedal; 2. Shift to manual mode and manually downshift from high gear to low gear sequentially; 3. When applying the handbrake, hold the release button and pull the handbrake intermittently without locking it; 4. After the vehicle stops, shift into park. Signs before brake failure include: 1. A feeling of weakness when pressing the brake; 2. Deviation occurs when braking; 3. The brake pedal feels softer; 4. Abnormal noises when braking; 5. The brake pedal does not return after pressing and there is no resistance felt when pressing. The brake system consists of a vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake discs.

16

1

Share

How much over the speed limit is driving at 100 in an 80 zone?

Driving at 100 km/h in an 80 km/h zone constitutes a 30% over-speed violation. Below is supplementary information: Legal regulations: Expressways shall clearly mark the speed limits for each lane, with the maximum speed not exceeding 120 km/h and the minimum speed not lower than 60 km/h. On expressways, the maximum speed for small passenger vehicles shall not exceed 120 km/h, while other motor vehicles shall not exceed 100 km/h. Lane speed limits: For roads with 2 lanes in the same direction, the minimum speed for the left lane is 100 km/h; for roads with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h.

14

5

Share

What causes the sudden shift from D to N gear while driving?

The reason for the sudden shift from D to N gear while driving is: a mismatch between the automatic transmission control unit and the gearbox. The main functions of a car's transmission are: 1. Changing the transmission ratio to meet the traction needs under different driving conditions; 2. Enabling reverse driving; 3. Interrupting power transmission to the drive wheels when the engine starts, idles, shifts gears, or needs to stop for power output. Maintenance methods for the transmission include: 1. Regularly checking the fluid level; 2. Avoiding skipping gears when upshifting; 3. Not forcing the transmission into neutral; 4. Not shortening the idle warm-up time; 5. Avoiding gear grinding when shifting. Precautions for changing transmission fluid include: 1. Selecting the appropriate viscosity to prevent power loss; 2. Using qualified transmission fluid; 3. Ensuring no impurities are introduced during the fluid change.

15

4

Share

What type of battery is BYD's battery?

What does ACCRES mean on a car?

What is the difference between yellow solid lines and yellow dashed lines?

How to engage reverse gear in Wuling Hongguang S3?

What is the solution for Audi brake failure?

How much over the speed limit is driving at 100 in an 80 zone?

What causes the sudden shift from D to N gear while driving?

Is the transmission of the older RAV4 AT or CVT?

How to Check if the Exhaust Valve is Faulty?

How to Open the Fuel Tank Cap of the E300?

How to Reset the Tire Pressure Light on a Bora?