What type of battery does the BYD Qin use?

1 Answers
NathanAnn
07/29/25 6:18pm
The BYD Qin is equipped with BYD's lithium iron phosphate (LiFePO4) battery. The total voltage is 500V with an energy capacity of 13 kWh. Each lithium iron phosphate battery cell has a voltage of 3.2V, and the battery system adopts a parallel connection method with individual cell capacity of 26Ah. The BYD Qin is a high-performance sedan independently developed by BYD Company Limited as part of its second-generation DM (Dual Mode) series. Its dimensions are 4740mm in length, 1770mm in width, and 1480mm in height, with a wheelbase of 2670mm. In terms of exterior design, the Qin largely follows the concept car's styling, with only minor changes such as the removal of the original brand logo from the front grille and blue elements around the headlight clusters. The front bumper features additional chrome accents on both sides, and the headlights incorporate LED daytime running lights.
Was this review help?
4
2
Share
More Forum Discussions

What are the symptoms of water in spark plugs?

What are the manifestations of water in spark plugs? The engine may experience difficulty starting, insufficient power, stalling, and other symptoms. A spark plug is mainly composed of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. Spark plugs are installed on the side or top of the engine. Early spark plugs were connected to the distributor via ignition cables, but over the past decade or so, engines in most cars have been modified to connect the ignition coil directly to the spark plug. Under high voltage, the air between the center electrode and the side electrode of the spark plug rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties and forming a discharge channel, resulting in a "breakdown" phenomenon. At this point, the gas forms a luminous body, known as a "spark." Along with the thermal expansion, a "crackling" sound is also produced. The temperature of this electric spark can reach as high as 2000-3000°C, which is sufficient to ignite the air-fuel mixture in the combustion chamber of the cylinder.
16
0
Share

When is the appropriate time to refuel a car based on remaining gasoline?

It is appropriate to refuel when the car has 7 to 10 liters of gasoline remaining. Refueling timing: When within 30 kilometers, it's best to wait until the fuel gauge light comes on before refueling. The fuel gauge light indicates that the fuel tank is almost empty, and there is generally a range of about 7-10 liters remaining when the light comes on. If you are on a highway or in a remote area, you can refuel when the fuel level in the tank is about one-quarter full. Impact of low fuel: When the remaining fuel in the tank is very low, it can affect fuel supply. This is because the vehicle experiences vibrations or tilts while driving, causing the fuel surface to fluctuate along with the car. However, the fuel pump is fixed inside the tank, and there might be brief moments when it cannot draw fuel. Power output can also be affected: if fuel does not flow smoothly into the fuel line, it can disrupt the engine's normal operation, leading to unstable power output.
17
0
Share

Is There a Problem If a Car's Alternator Gets Wet?

If a car's alternator gets wet but is not in operation, there is generally no issue. Below is relevant information about car alternators: Internal Drying is Sufficient: A car alternator operates at low voltage and will not cause electrical breakdown. Once internally dried, it can be used normally. The alternator serves as the primary power source for a vehicle, functioning to supply electricity to all electrical devices (except the starter) while simultaneously charging the battery when the engine is running normally. Driving Tips: Check Mirrors: Always use turn signals and reduce speed when turning or changing lanes. Before turning, check the rearview mirrors—left turns require checking the left mirror, right turns the right mirror, and both require checking the interior rearview mirror. Avoid Fixating on the Front: On open roads, keep your gaze level and focus about 100 meters ahead instead of staring directly in front of the vehicle. Clutch Usage: When decelerating above 40 km/h, avoid pressing the clutch initially; only depress it when speed drops to around 20 km/h. Steering: Turn the wheel slowly for high-speed maneuvers and quickly for low-speed turns.
9
2
Share

Does an Unaligned Body During Reverse Parking in Subject 2 Result in Penalty Points?

Subject 2 reverse parking with an unaligned body does not result in penalty points. As long as the vehicle body does not cross the lines during reverse parking, no points will be deducted. Introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. Precautions for Reverse Parking: Press the clutch, shift into first gear, and drive straight. When the engine hood just covers the front line of the garage, quickly turn the steering wheel fully to the left; when the vehicle body is parallel to the garage sideline, straighten the steering wheel and continue driving forward to the starting point. Stop when the front wheels cross the yellow line; shift into reverse gear to start reversing. Observe the left rearview mirror, and when the lower edge of the mirror aligns with the yellow line, quickly turn the steering wheel fully to the left; watch the left rearview mirror and pay attention to the distance between the rear wheel and the left corner of the garage. If the rear wheel is exactly 30cm from the left corner of the garage, no steering correction is needed, and you can continue reversing directly.
15
4
Share

How to Use the Hill Start Assist Function in a Car?

Automatic transmission cars: When the vehicle's gear is not in the P position (do not put it in P, any other gear is fine), press the brake pedal firmly until you hear a beep. At this point, the hill start assist system activates (working for two seconds), and the brake lights will illuminate, automatically generating braking force. Manual transmission cars: When starting on a steep or slippery slope, the system maintains braking for about three seconds, allowing the driver to smoothly transition from the brake to the accelerator pedal. If the car has this function, no setup is required—it's all automatic. Below is how the hill start assist system works: 1. When the vehicle is on an incline, the moment your foot leaves the brake pedal to press the accelerator, the HAC system automatically maintains brake fluid pressure for 2-3 seconds, preventing the vehicle from rolling back due to gravity and inertia. 2. When you press the accelerator, the system gradually reduces braking force. Once the HAC's brake control ends, the vehicle moves forward smoothly as you accelerate. 3. If you do not press the accelerator, the HAC's automatic brake control will also end after 2-3 seconds, so you can take your time to press the accelerator.
8
1
Share

Do All Cars Have a Three-Way Catalytic Converter?

Modern vehicles are all equipped with three-way catalytic converters. Only older vehicles produced before the implementation of the China II emission standard lack this component. The service life of a three-way catalytic converter ranges between 80,000 to 100,000 kilometers. The exact lifespan depends on the vehicle's usage conditions, fuel quality, and driving environment. Composition of a Three-Way Catalytic Converter: A three-way catalytic converter typically consists of four main parts: the shell, damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxide scale detachment, which could clog the substrate. The damping layer is composed of gaskets or wire mesh pads, serving to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration or thermal deformation, the gasket is made of expanded mica and aluminum silicate fibers, bonded with adhesive. The substrate is constructed from honeycomb-shaped ceramic materials, though many also use metal (including stainless steel) materials. The catalyst consists of precious metals such as platinum, rhodium, and palladium, which are sprayed onto the substrate to form the purifying agent.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.