What transmission is used in the new Mercedes-Benz GLE AMG?

Where to Install ETC on the Windshield?

The ETC installation position for passenger cars is generally on the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed on the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed on the microwave sunroof strip. Here are the precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which reduces the driver's field of vision. If this is not considered when installing the ETC, it will increase the driver's blind spot. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the wrong vehicle. The ETC lane recognition speed is 20 kilometers per hour. If the vehicle speed is too fast, the system may fail to read the vehicle device information, resulting in a failed transaction. When using a debit card to bind the ETC, insufficient balance will also cause the transaction to fail.

16

3

Share

What to Do When the Car Fuel Tank is Full?

If driving in the city for a long time, it is best not to fill up the fuel tank, as a full tank can increase fuel consumption. The effects of filling up the fuel tank are as follows: 1. First refueling for a new car: It is best not to fill it up completely, as overfilling may cause the fuel gauge and sensor to malfunction, leading to inaccurate fuel gauge readings. Try not to overfill when refueling. 2. Harm to the carbon canister: The gasoline vehicle fuel vapor adsorption and desorption device, commonly known as the carbon canister, is a device that reduces the emission of gasoline vapors from the car fuel tank. If the tank is overfilled, there is no space at the top of the gasoline tank, leaving no place for the gasoline vapors to escape. As a result, liquid gasoline instead of gasoline vapors enters the carbon canister, causing harm to it. Since gasoline contains various harmful substances, long-term exposure to gasoline vapors can be harmful to health and may even lead to cancer.

17

4

Share

Should Brake Pads Be Replaced at a 4S Shop?

Brake pads do not need to be replaced at a 4S shop; they can also be replaced at a nearby repair shop. The specific replacement steps are as follows: 1. Check the brake fluid level: Open the engine compartment to check the brake fluid level to prevent overflow during the replacement process. 2. Remove the wheel: Take off the wheel where the brake is located. 3. Remove the brake pads: Unscrew the bolts of the brake caliper and take out the brake pads. 4. Install the new brake pads: Install the new brake pads, tighten the guide bolts, and the replacement is complete. The maintenance methods for brakes are as follows: 1. High-temperature protection: Prevent corrosion of the brake system. 2. Cleaning method: Clean oil stains from the brake discs, brake drums, and brake pads to ensure good heat dissipation of the brake discs. 3. Oil change: Regularly replace the brake fluid. 4. Inspection: Regularly check the thickness of the brake pads or brake shoes.

1

4

Share

How much does door repainting devalue a car?

Door repainting can devalue a car by 10-15%. Here are specific details about door repainting devaluation:1. Devaluation range: The price difference between a car with repainted doors and one with original paint is typically 10-15%. If the paint job is poorly done, the difference can be even greater. If the repainting is due to accident repairs involving bodywork, the devaluation will be higher. Any repainted area on the car surface will cause devaluation.2. Relevant regulations: Damages to state, collective or others' property should be restored or compensated. Below is extended information about car surface painting:1. Types of paint: The paint on car surfaces belongs to metal baking paint.2. Function of painting: After baking paint on steel surfaces, the paint can resist acid and alkali, extending the lifespan of automotive steel components.

6

3

Share

What is the Difference Between Highways and Urban Roads?

About the differences between urban roads and highways are as follows: 1. Urban roads: Constructed by urban construction administrative departments in accordance with the "Urban Road Design Standards," providing engineering facilities for various vehicles (non-rail) and pedestrians to pass, including related bridges, tunnels, and ferries; 2. Highways: Built by highway construction, maintenance, and management departments under the transportation administrative authorities in accordance with the "Highway Engineering Technical Standards," mainly for automobile traffic with certain technical standards and facilities, connecting public roads between cities, urban and rural areas, and villages for automobile traffic, including highway bridges, highway tunnels, and highway crossings; 3. Differences: Urban roads refer to roads within urban areas with certain technical conditions and facilities, necessarily located within urban planning areas, serving the city itself, and emphasizing more on the service and access functions along the route; Highways are roads connecting various cities, urban and rural areas, and villages and industrial and mining areas, not necessarily located within urban planning areas, with their functional positioning serving inter-regional traffic connections, mainly emphasizing traffic functions.

13

5

Share

What does SELRESET mean on a car?

SELRESET on a car refers to resetting the mileage. Below are the specific details about RES:1. Deceleration function: Used for deceleration after setting cruise control.2. Cruise control: After temporarily canceling cruise control, pressing SET sets the current speed as the cruising speed. Here is additional information about cruise control:1. Speed setting: Press the speed setting switch to store the current driving speed and maintain this speed.2. Cancellation function: Press the brake pedal to deactivate the function.3. Resume function: Press the resume switch to restore the original speed.4. Speed adjustment: Speed can be slightly decreased or increased.

3

0

Share

What transmission is used in the new Mercedes-Benz GLE AMG?

Where to Install ETC on the Windshield?

What to Do When the Car Fuel Tank is Full?

Should Brake Pads Be Replaced at a 4S Shop?

How much does door repainting devalue a car?

What is the Difference Between Highways and Urban Roads?

What does SELRESET mean on a car?

What Does Vehicle Scratch Insurance Cover?

Do Cars Need to Warm Up in Summer?

Can 0W-40 engine oil be used in summer?

How to Check for Air Leakage in Car Air Conditioning?