What transmission is used in the new BMW 3 Series?

How Many Kilometers Per Year Is Considered Normal for a Car?

Generally, 20,000 to 30,000 kilometers per year is considered normal. Here are some driving precautions to keep in mind: 1. Stalling on complex road sections: This often occurs due to improper coordination between the brake pedal and clutch pedal. When learning to drive at a driving school, practice usually takes place on wide roads with few pedestrians and under the guidance of an instructor. On public roads, with vehicles and pedestrians crossing paths, encountering red lights or pedestrians crossing the street, drivers may brake abruptly, causing the engine to stall. 2. Stalling while following a vehicle uphill: This is a common issue for new drivers. In such cases, after stalling, first engage the handbrake, then restart the engine, and calmly restart using the 'hill start' technique learned in driving school. Always pull the handbrake promptly to prevent rolling back; when restarting, apply more throttle to avoid stalling again. 3. 'Hand-over-hand steering': Some new drivers tend to reach inside the steering wheel to turn it when making U-turns or sharp turns, a practice colloquially known as 'hand-over-hand steering.' While this may seem easier, it is very dangerous: in an emergency, the hand may not be able to quickly withdraw (especially when wearing gloves) to perform emergency actions (like pulling the handbrake or turning off the ignition); sudden changes in front-wheel direction can easily injure the arm. 4. Keeping the left foot on the clutch pedal: In city driving, where the clutch is used frequently, new drivers may habitually rest their left foot on the clutch pedal. Over time, this becomes a habit. During high-speed driving, if an emergency requires sudden braking, pressing the brake pedal with the right foot while also pressing the clutch pedal with the left foot removes the engine's braking effect, preventing the car from stopping within the effective braking distance and potentially causing avoidable accidents.

6

4

Share

What is the ground clearance of the 2018 Honda City?

The ground clearance of the 2018 Honda City is 100mm. Detailed specifications about the chassis are as follows: 1. The front suspension type is MacPherson strut independent suspension, and the rear suspension type is torsion beam non-independent suspension. The total vehicle weight is 1078kg, with a vehicle height of 1477mm, width of 1695mm, and length of 4450mm. 2. The height of the car's chassis, also known as the minimum ground clearance, refers to the distance between the lowest point of the chassis and the ground level when the car is at curb weight. Currently, most car chassis heights range from about 15cm to 20cm.

2

3

Share

What is the range of the Magotan New Energy in kilometers?

The Magotan New Energy has a range of 56 kilometers. Below are the relevant details about the Magotan New Energy: 1. The Magotan New Energy is equipped with a 1.4-liter turbocharged engine, with a maximum power of 110 kW, a maximum torque of 250 Nm, a maximum power speed range of 5000 to 6000 rpm, and a maximum torque speed range of 1750 to 3000 rpm. 2. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 85 kW and a maximum torque of 330 Nm. 3. This vehicle uses a 6-speed dual-clutch transmission. Dual-clutch transmissions offer fast gear shifts and high transmission efficiency, making them well-suited for use with small-displacement turbocharged engines.

9

3

Share

Symptoms of a Damaged Torque Converter?

Common symptoms of a damaged torque converter include: excessively high oil temperature in the torque converter, excessively low oil supply pressure, oil leakage from the torque converter, excessively low vehicle speed or lack of power, and abnormal noises during operation. Solution: Replace the torque converter in a timely manner. More information about the torque converter is as follows: 1. The torque converter is a hydraulic component composed of a pump impeller, turbine, and guide wheel. It is installed between the engine and the transmission, using hydraulic oil as the working medium, and serves to transmit torque, change torque, shift gears, and act as a clutch. 2. The role of the torque converter: It automatically and continuously changes the turbine speed according to load variations, improving the vehicle's passing ability; the torque converter connects the pump impeller and turbine through liquid, reducing the impact load of the engine on the transmission system and extending the lifespan of the transmission system. 3. The direction of oil flow in the torque converter: In a torque converter equipped with a guide wheel, the automatic transmission fluid changes direction after flowing from the turbine into the guide wheel. When the fluid flows back to the pump impeller, its flow direction aligns with the movement direction of the pump impeller, enhancing the rotational torque of the pump impeller and increasing the output torque.

2

5

Share

Is it okay not to apply film on the rear windshield?

It is acceptable not to apply film on the rear windshield. Here is more information about windshields: 1. The windshield was an innovative idea by Ford, which involved sandwiching two pieces of glass together with a layer of PVC plastic in between, creating a laminated glass structure. 2. The front windshield of a car is primarily made of laminated tempered glass or zoned tempered glass, capable of withstanding strong impacts. 3. Proper use of windshield washer fluid is essential during maintenance. When the windshield surface appears blurry, cleaning it with appropriate washer fluid can significantly improve clarity. If you notice issues with glare or reflections at night, wiping the windshield with washer fluid can help. Additionally, when driving on highways or in dusty conditions, washer fluid is consumed quickly, so it's important to refill it promptly.

7

3

Share

What is the Throttle Body Matching Method for Zotye?

There are three common methods for throttle body matching: manual matching, power-off matching, and diagnostic tool matching. Generally, matching and resetting are required after replacing a new throttle body or after disassembly and cleaning. The matching process is essentially the computer's self-learning phase, where it re-recognizes the throttle body's position and angle. The specific methods are as follows: 1. Manual Matching Method: For mechanically cable-operated throttle bodies, manual reset is used. By turning the ignition switch on and off several times in succession, the vehicle's computer will delete the original throttle memory and store new throttle data. To verify success, start the vehicle and check for normal operation. 2. Power-off Matching Method: After replacing the throttle body, disconnect the negative terminal of the battery for a few minutes to allow the vehicle to enter a dormant state. During this process, the vehicle computer's original memory is restored to factory settings. This method is only suitable for lower-end models. Start the vehicle and test for normal operation to confirm success. 3. Diagnostic Tool Matching Method: Use a specialized diagnostic tool to read data, then follow the prompts to reset adaptive values to zero, clear fault codes, start the vehicle, and check for normal operation to confirm successful matching.

11

2

Share

What transmission is used in the new BMW 3 Series?

How Many Kilometers Per Year Is Considered Normal for a Car?

What is the ground clearance of the 2018 Honda City?

What is the range of the Magotan New Energy in kilometers?

Symptoms of a Damaged Torque Converter?

Is it okay not to apply film on the rear windshield?

What is the Throttle Body Matching Method for Zotye?

Does the handbrake lock the front or rear wheels?

What is the function of a car's shark fin antenna?

What Causes the Foul Smell in the Phideon's Air Conditioning?

How to Deal with Fogging on the Outside of the Windshield in Summer?