What transmission is used in the Mingtu 1.8?

1 Answers
StLevi
07/30/25 4:41am
The Mingtu 1.8 transmission is from the Mobis brand. In terms of power, the new Mingtu is equipped with a 1.8L and a 1.6T engine, with maximum horsepower reaching 143 and 175 respectively. These are paired with a 6-speed automatic transmission and a 7-speed dual-clutch transmission. Here is more information about the Mingtu: 1. The Mingtu is a mid-to-high-end sedan under Beijing Hyundai, with body dimensions of 4710mm in length, 1820mm in width, and 1470mm in height, and a wheelbase of 2770mm. 2. In terms of appearance, the Mingtu further deepens the fluid sculpture design language, especially adopting a wide grille design similar to the Santa Fe, and will be equipped with lenses, with frosted silver and chrome line decorations inside the lights.
Was this review help?
5
0
Share
More Forum Discussions

How to Remove the Glove Box of a Dongfeng Fengshen S50?

First, open the car door from the outside and enter the vehicle interior to locate the glove box positioned below the front passenger seat. Unlock the switch in front of the glove box below the front passenger seat to open it and view the interior. After opening the glove box, extend its opening to the maximum position, then reach inside the outer lining to locate the glove box's fasteners. Pull the glove box out from the fastener position below, paying attention to the force and direction to avoid potential damage.
2
3
Share

How to Remove the Car Air Vent?

The air conditioning vents are usually installed on the dashboard with snap-fit connections. To remove them, you can use prying tools such as a flathead screwdriver. If you prefer not to pry, you can press the air vent downward to compress the side clips, then pull it forward to remove it easily. Some car models have an emergency light button on the air vent panel, so remember to disconnect the rear plug while removing it. Gentle and skillful removal is key. Different car models may have varying removal methods. It's advisable to consult professionals at a 4S shop for assistance.
20
1
Share

What to Do When the Lavida's Anti-Theft System Locks and the Engine Stalls Upon Starting?

Check whether the battery voltage is normal and inspect related circuits, including the starter. Check the spark plugs and ignition coils for normal operation, and perform resistance tests; inspect the intake system for proper operation, blockages, leaks, and whether the throttle body is excessively dirty. Check if there is fuel in the tank and whether the fuel pump is working properly, and if the fuel lines are clogged due to the use of poor-quality gasoline. Based on the vehicle's condition, inspect the car's overall status. If the issue cannot be identified, then the only option is to call for a tow truck.
20
1
Share

What to Do About Gear Downshift Noise in the New Magotan?

Check if the brake pads are nearly worn out. If they are new pads, inspect whether there are any foreign objects caught between the brake disc and the pads. Examine the condition of the brake calipers, such as wear on the sliding pins or detachment of the spring plates. Inspect the brake discs for grooves, as localized friction can cause noise. Also, check if the brake pads are too hard or if the noise-damping shims are incorrectly installed. If no issues are found with the brake pads, calipers, or discs, it is advisable to visit a repair shop for a professional inspection and maintenance.
10
3
Share

How to Fold the Side Mirrors on a Corolla?

On the side near the curb, manually fold the rearview mirror over. Avoid randomly adjusting the mirror glass, as this can cause the glass to shake, leading to eye fatigue. Press the switch to fold the mirrors; press the switch again to return them to their original position. If your vehicle does not come with a switch-operated folding system, it can be retrofitted. In automatic mode, locking/unlocking the doors is synchronized with the folding or unfolding of the mirrors. Performing a switch fold operation and turning off the engine will disable the automatic folding feature. To reactivate it, hold down both the switch and the angle adjustment switch simultaneously and then perform the switch fold operation.
2
0
Share

How to Check Volkswagen Genuine Parts?

Genuine parts manufacturers have fixed retail prices for parts within a certain region, and some even have nationwide uniform pricing. The price difference for the same type of products from different manufacturers is minimal. Genuine parts packaging is relatively standardized, with the product name, specifications, quantity, registered trademark, manufacturer's name and address, and contact number clearly marked on the packaging. The printing, engraving, or casting marks on the surface of genuine parts are clear and are the result of obvious mechanical work. Some parts may also have assembly marks engraved on their surfaces. Counterfeiters may simply process and refurbish used parts before selling them as new. If the surface paint is not smooth and even, or has small bumps, it is definitely a refurbished part. Check the surface of the part for rust. Qualified parts have both precision and smoothness on their mating surfaces, with more important parts having higher precision.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.