What transmission is used in the Geely Emgrand GL?

2 Answers
MacNadia
07/29/25 5:21am
Geely Emgrand GL uses the Getrag 6DCT transmission. Introduction to the Getrag 6DCT transmission: This transmission is jointly developed by Getrag, a world-leading transmission R&D and manufacturing company from Germany, and LUK. It underwent rigorous testing on 66 prototype vehicles, accumulating 14.58 million kilometers of testing, including high-temperature tests at 40°C, extreme cold tests at -35°C, and high-altitude tests at 4800m under various harsh conditions, ensuring full quality assurance. Data introduction: The 6DCT150 transmission has a fuel consumption of only 6.9L/100KM, which is even more fuel-efficient than manual transmissions. The torque parameter of a transmission is not like that of an engine, where bigger is better, but rather depends on its compatibility with the engine. Many transmissions have a wide applicable torque range, reaching up to 250Nm.
Was this review help?
9
2
Share
CassandraAnn
08/12/25 8:57am
I've been driving a Geely Emgrand GL manual for several years. Its transmission comes with a 5-speed manual and an automatic CVT option. The manual version is straightforward and reliable, with crisp gear changes, but driving in the city for long periods can make your legs sore. The automatic CVT drives smoothly and effortlessly, is fuel-efficient, and pairs well with the 1.4T engine. I recommend choosing based on personal preference—manual is simpler and cheaper to maintain, while automatic is better for beginners or families. I've also found the transmission to be stable in quality, with Geely's tuning being quite good, and haven't encountered any major issues. For daily maintenance, pay attention to oil changes. For city commuting, automatic is more hassle-free, while manual is for those who enjoy driving dynamics. Note that transmission types differ between high and low trim levels, so checking the specs before buying is the safest bet.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What Are the Reasons for Engine Not Accelerating?

Mainly caused by incorrect ignition timing, low fuel pressure, intake system air leakage, throttle position sensor or air flow meter malfunction, poor injector performance, or EGR system malfunction. Troubleshooting steps: 1. After starting the engine, check if the 'Check Engine' warning light turns off. 2. If the warning light does not turn off, inspect the cause and location of the fault based on the fault code. 3. Check if the ignition timing is excessively delayed. 4. Verify if the EGR system is functioning properly. 6. Inspect whether the intake and exhaust systems are blocked. 7. Check if the signals from the air flow meter, throttle position sensor, crankshaft position sensor, camshaft position sensor, and oxygen sensor are normal.
2
3
Share

What Are the Reasons for a Manual Transmission Car Not Engaging Gear After Starting?

Here are the reasons why a manual transmission car may not engage gear after starting: Clutch disc not fully disengaged: When starting the car, even after pressing the clutch pedal all the way down, you may still find it difficult to engage gear, or if you force it into gear, the car moves forward without lifting the pedal or the engine stalls. Solution: Adjust the clutch at a repair shop. Pressure plate damage: If the clutch disc or clutch pressure plate is damaged, when starting and lifting the clutch, you may feel unevenness, the car may jerk forward or backward, and the pressure plate may feel rough when pressing or lifting the clutch. Solution: Replace the clutch friction disc with a new one.
8
1
Share

How to Replace the Manual Transmission Fluid in a Cruze?

The method for replacing the manual transmission fluid in a Cruze is as follows: 1. Start the engine and warm it up to normal operating temperature; 2. Remove the drain bolt to allow the transmission fluid to flow out; 3. After the old transmission fluid has drained, reinstall the bolt; 4. Add new transmission fluid; 5. Start the car and perform gear shifting operations; 6. Check if the transmission fluid level is normal. Taking the 2018 Cruze as an example, its body dimensions are: length 4666mm, width 1807mm, height 1460mm, wheelbase 2700mm, fuel tank capacity 52l, and luggage compartment capacity 430l.
3
0
Share

Where is the Air Conditioning Filter Located in the Chery Fengyun 2?

Chery Fengyun 2's air conditioning filter is located at the upper left side of the engine compartment. The functions of the air conditioning filter include: 1. Ensuring the filter fits tightly against the housing to prevent unfiltered air from entering the cabin; 2. Separating dust, pollen, and abrasive particles from the air; 3. Absorbing moisture, soot, ozone, odors, carbon oxides, sulfur dioxide, and carbon dioxide from the air; 4. Preventing the car windows from fogging up, ensuring clear visibility for drivers and passengers, and enhancing driving safety. The Chery Fengyun 2 is a 5-door, 5-seat hatchback with the following body dimensions: length 4188mm, width 1686mm, and height 1480mm.
18
1
Share

Is driving at 70 in a 60 km/h urban speed limit considered speeding?

Driving at 70 in a 60 km/h urban speed limit is considered speeding. Here is an introduction to the content related to maximum speed: Maximum speed test: The maximum speed is the highest driving speed a car can achieve under windless conditions on a level, good-quality asphalt or concrete road. According to Chinese regulations, the last 500 meters of a 1.6-kilometer test section are used as the test area for maximum speed, with four round trips conducted to obtain an average value. Maximum speed limitation: The maximum speed is different from the theoretical maximum speed (which refers to the best performance achieved by the engine under optimal conditions, limited to theory). For some high-performance cars, manufacturers often use technical means (such as electronic speed limiters) to restrict the vehicle's maximum speed to protect the engine or comply with traffic regulations.
2
3
Share

Should the Spare Key Battery Be Removed?

Generally, the battery in a car's spare key does not need to be removed because the battery consumption of car keys is relatively slow. Here are the specific reasons: 1. No leakage: The structure of car key batteries is different from that of ordinary batteries. Car key batteries are designed for long-term storage and feature minimal discharge, preventing leakage. 2. Correct battery installation: When the spare key is needed, the battery must be reinstalled. Incorrect installation may render the key unusable. 3. Prone to wear: Removing the battery from the car key may lead to improper storage or surface wear, which could affect the battery's performance when needed. Therefore, it is recommended not to remove it.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.