What transmission does the Volkswagen Lamando use?

What to Do When the Buick Excelle Tire Pressure Monitoring Alarm Goes Off?

When the Buick Excelle tire pressure monitoring alarm goes off, the first step is to check if the tire pressure is too low. If the tire pressure is normal, you can turn off the monitoring light by resetting the tire pressure monitoring system. If there is indeed a serious air leak, such as a punctured tire, you will need to replace the spare tire or contact road assistance directly. The steps to reset the tire pressure monitoring are as follows: 1. Park the vehicle and engage the handbrake; 2. With the vehicle powered on, press the "MENU" button on the turn signal lever to switch the small screen on the dashboard to the "Vehicle Information" section; 3. Use the up and down selection buttons on the turn signal lever to find the tire pressure information section. 4. Press and hold the "SET/CLR" function button at the head of the turn signal lever until the message "Start tire pressure learning?" appears, then select "Yes." 5. After selection, the horn will sound twice to confirm that the tire pressure learning has started, and the left front turn signal will light up.

4

2

Share

How many questions can you get wrong in Subject 4?

According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses', for the Subject 3 road driving skills and safe civilized driving knowledge test, a score of 90 points is required to pass. Each incorrect answer deducts 2 points, meaning you can only get 5 questions wrong to pass, with a full score of 100. Questions 1-10 are true/false; questions 11-40 are single-choice; and questions 41-50 are multiple-choice. The test includes image analysis, animated case studies, and text descriptions. The scope of Subject 4 covers driving knowledge in adverse weather and complex road conditions; identification of common traffic signs, markings, and hand signals; accident rescue and hazardous material handling; comprehensive judgment of illegal behaviors and case analysis; emergency avoidance knowledge; safe driving knowledge; and driving ethics and civilized driving knowledge. According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses', there is no limit to the number of attempts for Subjects 1 and 4. If you fail the first attempt on the same day, you can retake it immediately. If you still fail, you need to reschedule, with no fee for retakes. However, note that the driving skill test permit is valid for three years. If the applicant does not complete the test within this period, the passed subject scores will be invalidated. Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driving license assessment. After the implementation of the Ministry of Public Security's Order No. 123, Subject 3 was divided into two parts: the road test and the safe civilized driving knowledge test, commonly referred to as 'Subject 4', which assesses 'driving ethics'. Subject 4 is the colloquial term for the Subject 3 safe civilized driving knowledge test and is not a separate subject. Since this test follows Subject 3, it is commonly called Subject 4. Officially, there is no Subject 4. The safe civilized driving knowledge test is conducted after Subject 3. Subject 4 Test Notes: Test Duration: The test lasts 45 minutes. Number of Questions: 50 questions are selected proportionally from the Subject 4 question bank based on the type of license being tested. Question Types: The test includes single-choice questions (including true/false) and multiple-choice questions, with questions presented as animations, images, scenario recognition, or text descriptions. Retake Notes: Failing Subject 4 only requires retaking Subject 4. The driving school will schedule the retake, with no limit on attempts and no retake fees. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 divided into two parts. Subject 1 covers traffic safety laws, regulations, and related knowledge; Subject 2 is the field driving skills test; and Subject 3 includes road driving skills and safe civilized driving knowledge.

1

5

Share

How to Check the Manufacturing Year of Tires?

The method to check the manufacturing year of tires is as follows: 1. There is a set of numbers on the tire wall, and the last four digits of this mark can provide information about the production date, consisting of four digits "AABB". The first two digits "AA" indicate the week of the year, and the last two digits "BB" indicate the year. If these corresponding marks cannot be found on the tire due to non-standard installation, it means the tire is mounted in the wrong direction. 2. Tires are usually composed of three parts: the outer tire, inner tube, and flap. There are also tubeless tires, which have an inner layer of airtight rubber in the tire body and require special rims. The structure of tires worldwide is evolving towards tubeless, radial, flat (small ratio of tire section height to width), and lightweight designs.

14

3

Share

What is the function of the kingpin inclination angle?

The function of the kingpin inclination angle is: The kingpin inclination angle allows the car wheels to automatically return to the straight position after steering. The larger the angle, the stronger the return effect, but the harder it is to turn the steering wheel, and it increases tire wear. It also makes steering easier. Below is relevant information: 1. The kingpin inclination angle refers to the acute angle formed by the projection of the car's steering knuckle kingpin axis (or the connecting line between the upper and lower ball joints of an independent suspension) and the vertical line on a plane perpendicular to the vehicle's longitudinal symmetry plane. When viewed from the front or rear of the car, the kingpin axis tilts inward towards the body, and this angle is called the kingpin inclination angle. 2. When the wheel rotates around the kingpin, the lowest point of the wheel would theoretically sink below the road surface. However, in reality, the lower edge of the wheel cannot sink below the road surface. Instead, the steering wheel and the entire front part of the car are lifted to a corresponding height. This effect causes the car's own gravity to help the steering wheel return to its original central position, making it easier to reset the steering wheel.

11

1

Share

What are hazard warning lights?

Hazard warning lights are the emergency indicators of a vehicle. When activated, they indicate that the car ahead has encountered an emergency situation preventing it from continuing forward, requiring following vehicles to brake promptly. The hazard lights serve to alert trailing vehicles. Below is more information about hazard warning lights: 1. Hazard indicators are used to warn other vehicles and pedestrians when a car experiences major malfunctions or emergencies. The hazard signal is controlled by a separate switch, typically sharing a flasher unit with the turn signals. 2. When the hazard switch is engaged, both sides of the vehicle's turn signal circuits are simultaneously powered, causing all front/rear turn lights and dashboard indicators to flash synchronously. Hazard lights remain operational even with the ignition turned off, as their switch connects the flasher directly to the battery.

7

2

Share

How many colors does the Roewe RX5 have?

The Roewe RX5 offers a variety of color options including Classic White, Thor Blue, Ruby Red, Chocolate Brown, Earl Black, and Knight Silver. As part of the vehicle's styling design, the color of a car is directly influenced by the designer and the overall vehicle shape. Different shapes are paired with different colors from an aesthetic perspective, as the right color can better highlight the design of the shape and showcase the car's characteristics. Here is some related information about the Roewe RX5: 1. In terms of power, the Roewe RX5 is equipped with a 1.5-liter turbocharged engine across all models, with a maximum horsepower of 169. 2. For the transmission, the Roewe RX5 offers a choice between a 6-speed manual and a 7-speed dual-clutch. 3. Regarding the suspension, the front suspension of the Roewe RX5 is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension.

6

3

Share

What transmission does the Volkswagen Lamando use?

What to Do When the Buick Excelle Tire Pressure Monitoring Alarm Goes Off?

How many questions can you get wrong in Subject 4?

How to Check the Manufacturing Year of Tires?

What is the function of the kingpin inclination angle?

What are hazard warning lights?

How many colors does the Roewe RX5 have?

What to Pay Attention to When Buying a Flood-Damaged Car?

Can You Drive with Damaged Tire Pressure?

Where is the water filler port for the Toyota Corolla's radiator?

What is the penalty for having two people in the front passenger seat?