What transmission does the Touareg use?

2 Answers
DeSimon
07/29/25 1:35am
Touareg uses an 8AT transmission. Here are the relevant details about the Touareg transmission: 1. The Touareg uses an 8AT transmission, which comes from ZF and features a new electronic gear lever that is very user-friendly. 2. The transmission is a mechanism used to alter the speed and torque from the engine, capable of fixed or stepped changes in the output and input shaft transmission ratios. 3. The Touareg is a mid-size sport utility vehicle launched by Volkswagen, with dimensions of 4878mm in length, 1984mm in width, 1686mm in height, and a wheelbase of 2899mm. 4. In terms of appearance, the car adopts the brand's new family design language, with a more angular body line, and the front grille is connected to the LED light strip.
Was this review help?
19
2
Share
BennettMarie
08/12/25 5:41am
I've been driving the Touareg for several years, and this model comes with an 8-speed automatic transmission that delivers an exceptionally smooth ride. Whether cruising on the highway or navigating stop-and-go city traffic, the gear shifts are seamless with almost no noticeable jerkiness. I find this particularly important for daily driving, especially for someone like me who frequently takes long-distance trips—it's both fuel-efficient and comfortable. The Touareg's transmission pairs well with the engine, offering quick power response and confident overtaking capability. I've heard some newer models even support manual mode, but I personally prefer the convenience of automatic—it's hassle-free. Overall, this setup is ideal for experienced drivers who prioritize comfort, with strong reliability and straightforward maintenance. Just check the fluids during regular servicing, and there's no need to worry about transmission issues unless you're consistently driving aggressively.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What to Do When the Outer Side of the Tire Turns Yellow Like Rust?

Tire yellowing resembling rust on the outer side can be addressed by using a tire brush along with a cleaner to thoroughly clean the wheel and tire sidewalls, removing the yellow stains. Then, use a lint-free soft cloth to dry the area, and finally apply a tire protectant. The reasons for yellowing on the outer side of the tire are as follows: 1. Brake pad metal powder rust: Since brake pads contain iron, friction during braking generates powder, which turns into rust when exposed to water and flows onto the tire sidewalls, causing yellowing over time. 2. Mud stains: Tires are the "shoes" of a vehicle. If frequently driven in construction sites or similar environments, the tire sidewalls are prone to yellowing. Without regular cleaning habits, mud stains can seep into the tire rubber, making them difficult to clean, though this is a normal yellowing condition. 3. Tire wax oxidation yellowing: New tires are often coated with a layer of tire wax. Vehicles frequently parked outdoors may experience yellowing on the tire sidewalls due to oxidation of the wax under high temperatures in open environments. 4. Protectant or premature rubber aging yellowing: This is an abnormal phenomenon, typically occurring when a protectant is applied directly to an uncleaned tire, accelerating the aging process and causing yellowing. Additionally, the use of retreaded tires can lead to premature aging and yellowing signs.
15
5
Share

Can temporary license plates be issued on weekends?

On weekends, temporary license plates can be issued on Saturday but not on Sunday. Below is an introduction to temporary license plates: 1. Target: The use of temporary license plates is time-limited and region-specific. 2. Scope: Those who meet any of the following conditions can apply for a temporary license plate at the local vehicle management office. 3. Procedures for obtaining a temporary license plate: Applicants must provide a company letter of introduction, proof of vehicle origin, certificate of compliance, and other relevant documents (except for the letter of introduction, which is kept on file, all other documents are returned to the applicant) when applying at the vehicle management office. During the application process, the applicant should specify the starting and ending locations of the vehicle's travel and the duration for which the temporary license plate will be used.
2
2
Share

Is releasing the clutch done by lifting the foot or pulling it back?

When releasing the clutch, the entire foot should be pulled back before releasing the clutch. Below is a related introduction about the clutch: 1. Working principle: When the clutch is pressed down, the engine's transmission device disconnects from the wheels, and the engine's power is transmitted to the wheels. When the clutch is released, the engine's transmission device connects with the wheels, the power is transmitted to the wheels, and the car starts. 2. Separation process: Press down the clutch pedal, first eliminate the free clearance of the clutch within the free travel, and then generate the separation clearance within the working travel, separating the clutch.
5
4
Share

Is an Appointment Required for a Test Drive?

An appointment is required for a test drive. Below is an introduction to test drives: 1. Introduction: A test drive refers to a customer driving a designated vehicle along a specified route under the guidance of a dealer-appointed representative, allowing them to understand the vehicle's driving performance and handling characteristics. 2. Content: The dealer-appointed representative is typically the salesperson who received the customer or a dedicated test drive specialist. The designated vehicle is usually a demo car provided by the dealer, and unsold inventory vehicles should not be used for test drives. 3. Precautions: Proper seating posture, good visibility, and the use of seat belts are fundamental safety measures. Before starting the test drive, adjust the seating position, then adjust the steering wheel and both interior and exterior rearview mirrors, and finally fasten the seat belt.
12
4
Share

How Long Does a Test Drive Usually Last?

Test drives typically last 20-30 minutes. Below is an introduction to test drives: 1. Introduction: A test drive refers to a customer driving a designated vehicle along a specified route under the guidance of a dealer-appointed staff member to understand the vehicle's driving performance and handling characteristics. 2. Content: The dealer-appointed staff is usually the salesperson who received the customer or a dedicated test drive specialist. The designated vehicle is typically a demo car provided by the dealer, and unsold inventory vehicles should not be used for test drives. 3. Precautions: Proper seating posture, good visibility, and the use of seat belts are fundamental safety measures. Before starting the test drive, adjust your seating position, then adjust the steering wheel and both interior and exterior rearview mirrors, and finally fasten your seat belt before driving.
5
4
Share

Does the Peugeot 508 have an independent suspension?

The Peugeot 508 uses an independent suspension. Here is an introduction to the suspension of the Peugeot 508: 1. The front suspension type used in the Peugeot 508 is a MacPherson independent suspension, and the rear suspension type is a multi-link independent suspension. 2. The MacPherson independent suspension is a relatively classic type of suspension. This type of suspension combines the coil spring and shock absorber into one unit, differing from traditional suspension types. By integrating these components, it reduces the overall size of the suspension, saving space. 3. The MacPherson independent suspension is a durable suspension system with strong road adaptability. It is widely used in the global automotive market and is the preferred suspension for many vehicle models. 4. The rear suspension type used in this car is a multi-link independent suspension. The multi-link independent suspension consists of links, shock absorbers, and suspension springs. This type of suspension uses more links than conventional suspensions, typically referred to as a four-link or five-link independent suspension. 5. Due to the increased number of links used in this type of suspension, it allows the wheels to maintain as vertical a position as possible relative to the ground, minimizing body roll to the greatest extent. This ensures optimal handling performance and enhances the comfort of the vehicle.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.