What transmission does the Tiguan use?

What are the causes of low oil pressure in diesel engines?

Low oil pressure in diesel engines may be caused by insufficient oil volume, excessively high engine temperature, malfunction of the oil bypass valve, or a clogged oil filter. Low oil pressure can lead to severe engine wear and significantly reduce its service life. Below are detailed explanations: Insufficient oil volume: If the oil volume is insufficient, the oil pump's output will decrease or fail to pump oil due to air ingress, resulting in reduced oil pressure. This can cause increased wear on the crankshaft and bearings, as well as the cylinder liners and pistons due to inadequate lubrication. Excessively high engine temperature: If the engine cooling system has excessive scale buildup, poor heat dissipation, prolonged overload operation, or delayed fuel injection timing, the engine may overheat. This accelerates oil aging, degradation, and thinning, causing leakage through various clearances and a drop in pressure. Oil bypass valve malfunction: The oil bypass valve maintains normal oil pressure in the main oil passage. If its pressure-regulating spring weakens or is improperly adjusted, or if the valve seat and ball bearing surfaces wear out or become stuck and fail to close tightly, the oil pressure will decrease. Clogged oil filter: When the oil filter is clogged and cannot allow oil flow, the bypass valve located at its base opens, allowing oil to bypass the filter and enter the main oil passage directly. If the bypass valve's opening pressure is set too high, it may not open promptly when the filter is clogged. This can cause the oil pump pressure to rise, increase internal leakage, and result in a drop in oil pressure.

7

3

Share

How Many Types of Automotive Turbochargers Are There?

Types of automotive turbochargers: 1. Mechanical Supercharging System: This device is installed on the engine and connected to the engine crankshaft via a belt. It derives power from the engine output shaft to drive the supercharger's rotor, thereby pressurizing air and blowing it into the intake manifold. 2. Pressure Wave Supercharging System: Utilizes the pulse pressure waves of high-pressure exhaust gases to force air compression. This system offers excellent supercharging performance and acceleration but is relatively bulky. 3. Exhaust Gas Turbocharging System: This is the most common turbocharging device, where the turbocharger has no mechanical connection to the engine. It essentially functions as an air compressor, increasing air intake by compressing air. 4. Compound Supercharging System: Combines exhaust gas turbocharging and mechanical supercharging. Mechanical supercharging aids torque output at low speeds but has limited power output at high speeds, whereas exhaust gas turbocharging delivers strong power output at high speeds but lacks effectiveness at low speeds.

10

1

Share

What to Do When Running Out of Fuel on the Highway?

A temporary solution for running out of fuel is to pour alcohol into the fuel tank. When a car is about to run out of fuel, there will be a warning on the display. At this point, you should promptly look for the nearest gas station. If the nearest gas station is too far away, you can temporarily pour alcohol into the fuel tank. When alcohol mixes with fuel, it expands the volume of the fuel, allowing the car to travel a bit further. Ask Other Vehicles for Help: If you run out of fuel on the highway, you can seek help from passing vehicles on the roadside. Exit the Highway Promptly: If there are no other options, you can drive your vehicle off the highway to refuel and then re-enter the highway after filling up. Call for Rescue: If the car has already run out of fuel and none of the above methods are feasible, you can promptly call for rescue and wait for assistance.

6

0

Share

What should be paid attention to in the maintenance of new energy vehicles?

Maintenance aspects to pay attention to for new energy vehicles: 1. Core maintenance: battery system. New energy vehicles use batteries as their fundamental core component, which is the power source of the entire vehicle. Regular inspections and repairs at 4S shops are necessary. Additionally, batteries should be placed in well-ventilated areas and timely recharged to ensure normal usage and extend battery life. 2. Key maintenance: chassis. Most of the motors in new energy vehicles are distributed on the chassis, so the condition of the chassis is crucial for the normal operation of the entire vehicle. Regular inspections of the vehicle's underside at 4S shops are required to prevent aging of the bottom wiring and damage to the protective layer, which could lead to major malfunctions. 3. Unique maintenance: fluid level inspection. The coolant in new energy vehicles is used to cool the motor and needs to be replaced regularly.

5

4

Share

Is 3500 RPM at 120 km/h Normal?

An engine speed of 3500 RPM at a vehicle speed of 120 km/h is considered normal. The RPM constantly reflects the engine's operating condition. If the RPM is too low, fuel combustion in the cylinders will be incomplete, leading to easy carbon buildup in the engine, which can cause significant damage over time. Conversely, excessively high RPM can lead to engine burnout. Engine speed is related to several factors, including the engine's low-end torque, the number of transmission gears, and the type of engine, as detailed below: Engine's low-end torque: Generally, engines with stronger low-end torque tend to have lower RPM during high-speed cruising. This is because high-speed cruising in most vehicles primarily overcomes wind resistance and rolling resistance. Number of transmission gears: Besides the influence of engine power, the transmission plays a crucial role in determining RPM. Simply put, under the same power conditions, a transmission with a wider gear ratio range will result in lower RPM during high-speed cruising. Type of engine: Turbocharged engines typically maintain lower RPM during high-speed cruising compared to naturally aspirated engines. This is due to the broader maximum torque RPM range of turbocharged engines.

15

0

Share

What is the fuel consumption of the Roewe RX5 MAX?

The Roewe RX5 MAX currently has 5 models on sale. Among them, the Roewe RX5 MAX 2022 1.5T Automatic Youwei Flagship Edition, Premium Edition, and Luxury Edition are equipped with a 181-horsepower engine, with an NEDC fuel consumption of 7.5L per 100km. The Roewe RX5 MAX 2022 2.0T Automatic Youwei Ultimate Edition and Honor Edition are equipped with a 231-horsepower engine, with an NEDC fuel consumption of 8.8L per 100km. The fuel tank capacity of the Roewe RX5 MAX is 55L. The distance each model can travel on a full tank of fuel is as follows: Models equipped with the 181-horsepower engine can travel 55/7.5*100=733km on a full tank. Models equipped with the 231-horsepower engine can travel 55/8.8*100=625km on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is harder to atomize, requiring more fuel for combustion, thus increasing consumption. Additionally, in cold temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

9

3

Share

What transmission does the Tiguan use?

What are the causes of low oil pressure in diesel engines?

How Many Types of Automotive Turbochargers Are There?

What to Do When Running Out of Fuel on the Highway?

What should be paid attention to in the maintenance of new energy vehicles?

Is 3500 RPM at 120 km/h Normal?

What is the fuel consumption of the Roewe RX5 MAX?

How to Cancel Guangdong YueTongCard ETC?

What does the Geely CMA Architecture mean?

How Long After Production Are Tires Considered Inventory Tires?

What are the dimensions of the Accord's trunk?