What transmission does the Lingxuan use?

2 Answers
McLondyn
07/24/25 5:47pm
Lingxuan uses a 5-speed manual transmission, 6-speed manual transmission, and 6-speed automatic manual transmission. Taking the 2017 Lingxuan Manual Happiness model as an example, it belongs to an MPV with body dimensions of length 4730mm, width 1795mm, height 1755mm, and a wheelbase of 2760mm. The 2017 Lingxuan Manual Happiness model is equipped with a 1.6L naturally aspirated engine, with a maximum power of 92kW at 6000rpm, and a maximum torque of 160Nm at 4000 to 5000rpm.
Was this review help?
2
2
Share
LoganLee
08/11/25 9:49am
I've driven the Lingxuan many times, and it comes with two transmission options: a 5-speed manual, which is great for those who enjoy shifting gears themselves—it's quite straightforward with clear gear positions; and a 6-speed automatic, reportedly from Aisin, offering smooth and comfortable driving. From a driving experience perspective, the automatic transmission is much more convenient in city traffic, eliminating the need for frequent clutch use, and it manages fuel consumption decently, averaging around 7-8 liters per 100 km. The manual transmission, on the other hand, provides quicker power response and a more engaging shift feel, though it might feel tiring for beginners. Transmission maintenance is crucial—automatics require regular oil changes to prevent potential jerking over time. Overall, the Lingxuan's transmission setup is quite reliable for an MPV, designed with a good balance in mind.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

What should you pay attention to when learning to drive?

Specific precautions for learning to drive are as follows: 1. Familiarize yourself with the basic operations of the vehicle and adjust your psychological state. 2. When starting, slowly release the clutch and gently press the accelerator: press the clutch all the way down, shift into first gear, release the handbrake, gently press the accelerator with your right foot and hold it steady, slowly release the clutch. When you feel the car move, hold the clutch steady, and once the car moves smoothly, slowly release the clutch completely while gradually pressing the accelerator. 3. When parking, engage the handbrake properly to prevent the vehicle from rolling. 4. Before downshifting, release the accelerator first, reduce the car to the desired speed, fully depress the clutch pedal, then gently apply some throttle, and shift the gear lever into the gear that matches the speed. 5. When accelerating, gently apply the throttle, press the clutch all the way down, and then shift the gear lever into the gear that matches the speed.
11
3
Share

How to use the cruise control on the Southeast DX3?

The operation method of cruise control is as follows: 1. Press the control switch to activate the cruise control standby mode, then accelerate and push the control lever downward to set the cruise speed; 2. To accelerate, push the control lever upward or step on the accelerator; 3. To cancel the cruise control, you can lift the control lever upward, turn off the main cruise control switch, step on the accelerator pedal, or lightly tap the brake. The usage method of cruise control is as follows: 1. Press the power key to turn on the cruise control system (some cars may have the on and off functions on the same key, while others may have separate keys). At this point, the cruise control indicator light on the dashboard will illuminate. 2. Increase the speed to your desired level, then press the SET key. You can then release the accelerator with your right foot, and the speed will be maintained at the current level. 3. If you need to fine-tune the speed, you can use the RES and SET- keys for adjustments. 4. Additionally, there are three ways to deactivate the cruise control: stepping on the brake, pressing the CANCEL key, or pressing the ON/OFF key. 5. If the cruise control is canceled by stepping on the brake or pressing the cancel key, you can press the RES key to resume the previous cruise control speed.
20
4
Share

Why Is Gear Shifting Difficult?

Reasons for difficult gear shifting: 1. The synchronizer is not working properly, excessively worn, or damaged; 2. The gear lever is deformed or loose; 3. The clutch is not fully disengaged, and the gear on the first shaft of the transmission is rotating at high speed, making it unable to engage with the internal teeth of the coupling sleeve; 4. The transmission coupling sleeve and the gear shift gears still need a running-in period. Manual transmission shifting techniques: 1. Shift gears according to the vehicle speed; 2. If the vehicle shakes while driving, it indicates that the engine is operating at low speed and high load, and it is necessary to immediately downshift by one or two gears based on the actual situation; 3. When shifting gears, the clutch and throttle should be well-coordinated. Press the clutch to the bottom, then release the throttle pedal, quickly shift to the corresponding gear, and immediately release your hand after shifting. Do not keep your hand on the gear lever for a long time, as it may easily damage the gear lever.
17
2
Share

What is the fuel tank capacity of the Geely Binrui?

Geely Binrui fuel tank capacity is 50 liters. The following introduces refueling precautions and fuel tank capacity calculation units: Refueling precautions: It is necessary to refuel the vehicle in time. When the fuel gauge pointer reaches the red line, you need to go to the gas station to refuel. Be careful not to refuel only when the gasoline is completely exhausted, as this will damage the car engine. Fuel tank capacity calculation unit: International standards use L as the calculation unit for car fuel tank capacity. Different countries also have corresponding standards for car fuel tank capacity. China stipulates that the car fuel tank capacity is 95% of the rated value, but depending on the actual situation, the actual capacity is generally larger than the nominal capacity.
17
0
Share

What maintenance is needed for a car at 30,000 kilometers?

At 30,000 kilometers, car maintenance requires changing the engine oil, replacing the oil filter, replacing the air filter, replacing the cabin air filter, cleaning the throttle body, replacing the brake fluid, replacing the coolant, replacing the spark plugs, and changing the brake fluid. Generally, for the first maintenance of a new car, only the engine oil and oil filter need to be replaced, followed by some routine inspections. Changing the engine oil and oil filter is a mandatory task because the oil's shelf life is significantly shortened under the harsh conditions of high temperature and high pressure inside the engine, leading to a substantial decrease in performance. Over time, the oil can no longer protect the engine effectively. The oil filter is used to prevent impurities from mixing with the oil, which can cause oxidation, leading to the formation of sludge and clogging the oil passages.
8
3
Share

What is the principle of foam fire extinguishers in extinguishing fires?

Foam fire extinguishers primarily work on the principles of cooling and suffocation. They form a continuous foam layer on the surface of the burning material, cooling it through the foam itself and the released mixed liquid, while also isolating the burning material from oxygen via the foam layer's coverage, thereby achieving fire suppression. Foam fire extinguishers are categorized into portable foam fire extinguishers, cart-type foam fire extinguishers, and air foam fire extinguishers. They should be stored in a dry, cool, well-ventilated, and easily accessible location, away from high temperatures or areas prone to direct sunlight to prevent the decomposition of carbonates and loss of effectiveness. In winter, anti-freezing measures should be taken to prevent freezing, and regular dust removal and nozzle cleaning are necessary to ensure smooth operation.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.