What Transmission Does the Lingpai Use?

1 Answers
VonCorbin
07/30/25 2:37am
The Lingpai is equipped with a CVT continuously variable transmission and a 6-speed manual transmission. Models with the CVT transmission provide a seamless driving experience without the noticeable jerks during gear shifts, significantly enhancing the vehicle's stability and comfort. The CVT transmission can optimally select the appropriate gear ratio based on the engine's operating conditions, ensuring better fuel efficiency across various driving scenarios. The Lingpai is a compact mid-size sedan under GAC Honda, with dimensions of 4664mm in length, 1750mm in width, and 1505mm in height, and a wheelbase of 2650mm.
Was this review help?
12
3
Share
More Forum Discussions

Will traffic police check cars with added spoilers?

Adding a spoiler is considered illegal modification, and traffic police will check it. Below are specific details about car spoilers: 1. Overview: A car spoiler refers to the ducktail-shaped protrusion installed at the rear end of the car's trunk lid, which is part of the car's aerodynamic kit. Its main function is to reduce the lift at the rear of the vehicle. 2. Function: The role of a car spoiler is to create downward pressure from air resistance when the car is driving at high speeds, effectively counteracting lift and controlling airflow downforce, thereby reducing the drag coefficient and enhancing the car's high-speed stability. Since spoilers can reduce a car's air resistance, adding a spoiler to high-speed cars can also help save fuel to some extent; it also makes the car's appearance more attractive, serving a certain decorative purpose.
18
0
Share

What engine is used in the BYD L3?

The engine used in the BYD L3 is independently developed by BYD and is a domestically produced engine. The 1.8L engine model in the BYD L3 is BYD483QA, with a maximum horsepower of 122, a maximum power of 90kW, and a maximum torque of 160Nm. The 1.5L engine model is BYD473QB, with a maximum horsepower of 107, a maximum power of 79kW, and a maximum torque of 144Nm. For daily maintenance of the BYD L3 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When engine oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through, the filter may burst or the safety valve may open, allowing the oil to bypass the filter and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
15
1
Share

How to Determine if a Car Has Cylinder Scoring?

In daily life, we may encounter the issue of cylinder scoring in cars. Here are specific methods to determine whether a car has cylinder scoring: 1. Speed-based judgment: If a car experiences cylinder scoring, there will be a noticeable jerking sensation while driving. Compared to normal conditions, the car will perform differently when climbing slopes, and the speed will decrease. 2. Engine-based judgment: If a car has cylinder scoring, the engine will produce abnormal noises, similar to a buzzing sound, which is easily noticeable. 3. Fuel consumption-based judgment: If the car shows significantly increased fuel consumption, it might be due to cylinder scoring.
12
5
Share

What to Do If You Forget to Bring Your Vehicle License and Get Checked by Traffic Police?

Solution for forgetting to bring the vehicle license when checked by traffic police: Provide the electronic vehicle license and the driver's ID card to the traffic police. According to China's "Road Traffic Safety Law," drivers must carry their driving license with them while driving. Failure to do so may result in a fine of 50 yuan and 1 penalty point, and the vehicle may even be impounded. With the "electronic driving license," you can travel without the original copy, and showing the electronic license will not incur penalties. Below is an introduction to the vehicle driving license: 1. Definition of a motor vehicle driving license: It refers to the legal certificate issued by the administrative department after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations and driving skills and passed the examination, permitting them to drive a certain type of motor vehicle. 2. Examination subjects for the motor vehicle driving license: Include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
18
3
Share

What is the engine model of the 2018 Touran?

The engine of the 2018 Touran is a Volkswagen engine produced at the Lou Tang Engine Factory in Jiading District, Shanghai. The engine model of the 2018 Touran is EA211, with a maximum horsepower of 110, a maximum power of 81kw, and a maximum torque of 155nm. For daily maintenance of the 2018 Touran engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. When the amount is small, it remains suspended in the oil; when the amount is large, it precipitates from the oil, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
10
0
Share

Is Strong Adhesive Remover Harmful to Car Paint?

Strong adhesive remover is harmful to car paint. Introduction to strong adhesive remover: Prolonged use of adhesive remover can cause certain damage to car paint, making the paint soft and easily scraped off with a fingernail. If sprayed for a short duration, it won't harm the paint. The maximum recommended usage time for adhesive remover should not exceed one minute; around 30 seconds is sufficient. For adhesive removal, using essential balm or alcohol to wipe is effective. The method involves soaking a cloth with essential balm, moistening the adhesive, and then wiping it clean in a clockwise circular motion. Car paint maintenance tips: Do not wash the car too frequently; once a month is adequate. Frequent washing can cause the cleaning cloth to rub against the paint, leading to damage over time. Any scratches on the paint should be addressed promptly, as they can develop small rust spots over time. If not treated, the rust can spread and, in severe cases, damage the primer. Avoid leaving the car parked outdoors for extended periods. If long-term parking is necessary, consider using a car cover.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.