What transmission does the Lexus CT200h use?

1 Answers
AmyDella
07/25/25 5:41am
The Lexus CT200h uses an ECVT continuously variable transmission, paired with a 1.8L naturally aspirated engine that delivers a maximum power of 100 kW at 5,200 rpm and a maximum torque of 142 Nm at 4,000 rpm. The Lexus CT200h is a compact 5-door, 5-seat hatchback with body dimensions of 4,360 mm in length, 1,765 mm in width, and 1,455 mm in height, and a wheelbase of 2,600 mm. It features front-wheel drive, with a front suspension consisting of MacPherson struts and a stabilizer bar, and a rear suspension with an independent double-wishbone setup and a stabilizer bar.
Was this review help?
6
2
Share
More Forum Discussions

What to Do When Your Car's Starting Battery Dies?

Ask a nearby friend for help. As long as they drive over with a car that has sufficient battery power and bring jumper cables, you're good to go. Identify the positive and negative terminals of the other car's battery, connect the power cables with the insulated end, ensure the other vehicle doesn't turn off, and then try starting your own car.
9
0
Share

How to Soundproof a Car?

Seal all holes and openings on the steel plate between the engine compartment and the cabin, whether they are wired or not, using foam sealant. Clean the inner arch plastic or flocked panel thoroughly, ensure it is firmly secured, and then directly spray the wheel arch soundproofing damping paint onto the inner arch.
16
2
Share

How to Properly Rotate Tires?

Radial tires can only be rotated on one side, meaning the tires must remain on the same side of the vehicle to maintain the same rotation direction. If the vehicle is equipped with snow tires, there is no need to rotate these tires.
11
3
Share

How to Turn on the Heater in a 2013 Buick Excelle?

First, start the vehicle and allow the engine to warm up until the coolant temperature reaches above 40°C-60°C. Then, turn off the AC button, adjust the air volume and direction to your comfort level, and set the temperature control to the red zone.
9
0
Share

How to use Dongfeng Fengxing SX6 mobile phone interconnect?

Press the multifunction button until the indicator light emits blue light. The interface of the vehicle system displays the name and pairing password of the vehicle system. Turn on the mobile data and hotspot, click the wireless WiFi of the vehicle system, and enter the name and password to complete the interconnection.
16
4
Share

What to Do If Your Car Gets Flooded in a Heavy Rain?

Turn off the engine, do not restart it, and then call for rescue. Try to loosen the battery cable fastener with a wrench and remove the negative battery cable. Dry the vehicle's wiring; promptly replace the brake fluid and engine oil, clean the flooring and floor mats, and wash the seats and seat covers.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.