What transmission does the Lavida naturally aspirated engine use?

What's the reason for the engine not starting?

Here are the possible reasons why the engine cannot start: 1. Fuel supply system issues: Clogged low-pressure fuel lines, loose or leaking fuel pipes, air in high-pressure fuel lines, poor technical condition of fuel injectors, and incorrect fuel injection timing can all cause the engine to fail to start. 2. Starting system issues: Power supply failure, poor contact in the electromagnetic switch, poor contact between the starter motor commutator and brushes, and clutch slippage in the starter transmission mechanism can also lead to the engine not starting. 3. Cylinder or air intake issues: Damaged cylinder head gasket causing air leakage, valves not sealing properly leading to air leakage, worn piston cylinder liners causing air leakage, and clogged air filter elements can also prevent the engine from starting normally.

13

1

Share

What are the differences between halogen, xenon, and LED headlights?

Below are the specific differences among the three types of automotive headlights: 1. Light intensity: The light intensity of the three types of automotive headlights, ranked from strongest to weakest, is as follows: LED lights are the strongest, with a light output of 6200 lumens; followed by xenon lights, which are moderate, with a light output of 4500 lumens; halogen lights are the weakest, with a maximum light output of 1200 lumens. 2. Durability: LED lights have a lifespan of up to 100,000 hours; xenon lights last more than 30,000 hours; halogen lights have an average lifespan of 500 hours. This shows that LED lights also have the longest lifespan.

2

Share

Why does the engine shake when the car's air conditioning is turned on?

The reasons for engine shaking when the car's air conditioning is turned on: 1. Throttle valve carbon deposits: The most common reason for engine shaking when the air conditioning is turned on is carbon buildup on the throttle valve, which affects the engine. When the air conditioning is turned on, the engine load suddenly increases, and the throttle valve opens wider. At this point, the issue of dirt is magnified, causing the throttle valve to stick or fail to open to the proper position, restricting the air intake and reducing engine power, ultimately leading to engine shaking. 2. Spark plug carbon deposits: After a period of use, spark plugs accumulate carbon deposits. If not cleaned in time, this can reduce the engine's output torque, causing shaking when the air conditioning is turned on. Soak the spark plugs in a container with white vinegar for 2-3 hours (or 4-5 hours for severe cases), then use a stiff brush to remove the carbon deposits. Clean them with gasoline, let them air dry naturally, and they can be reused. 3. Fan deformation or loose screws: Check if the shaking is caused by resonance from a deformed fan when the air conditioning is running or by loose fan mounting screws.

5

3

Share

What type of transmission is used in the Senova X65?

The transmission brand used in the Senova X65 is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the top global market share in this field. The Senova X65 is equipped with either a 5-speed manual transmission or a 6-speed automatic transmission. For the automatic transmission: During driving, the transmission will automatically adjust to the most appropriate gear ratio based on throttle position and vehicle speed. For the Senova X65's transmission in daily use, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing; Avoid prolonged coasting in neutral. Many experienced drivers coast in neutral when driving manual transmission vehicles, but for automatic transmission vehicles, this can cause overheating and create a jolt when shifting back into D gear; Never shift into D/R gear before the vehicle comes to a complete stop. Some drivers shift directly into reverse while the vehicle is still moving to showcase smooth operation, but this severely damages transmission gears and may lead to gear grinding over time; Avoid frequently climbing steep slopes in D gear. Automatic transmission vehicles often overheat under high loads or shift prematurely, causing a lack of power when climbing. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission; Do not tow over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the platform while in N gear, rather than towing directly with a rope or another vehicle.

16

3

Share

What to Do When the Steering Wheel Locks After a Car Goes Through Water?

It is quite common for the steering wheel to lock after a car goes through water, and there are many reasons for this phenomenon. Below are the reasons why the steering wheel may lock after going through water: 1. Engine failure: The car going through water causes engine failure, leading to the steering wheel locking. 2. Generator slippage: Water entering the belt causes the generator to slip, resulting in no power steering. 3. Wet steering sensor: A wet steering sensor causes the steering wheel to malfunction. 4. Loss of power steering: The car going through water causes a loss of power steering, which can happen in deep water but may recover in shallow water.

19

3

Share

Is the Senia R7 an SUV?

Senia R7 is an SUV model. Here are the relevant introductions: 1. Senia R7 is a compact SUV launched by China FAW, with all four models equipped with a 1.6L naturally aspirated engine and matched with a 5-speed manual transmission. 2. Senia R7 is powered by the CA4GB16 engine independently developed by FAW, paired with a 5-speed manual transmission, delivering a maximum output power of 85KW and a peak torque of 155N.m. 3. Senia R7 is configured with a front-engine layout, meaning the engine is positioned in front of the front axle. The advantages of a front-engine layout include simplifying the structure of the transmission and drive axle, with the engine delivering power directly to the front wheels, eliminating the need for a long driveshaft. This not only reduces power transmission loss but also significantly lowers the complexity and failure rate of the powertrain. Additionally, placing the engine in front of the driver enhances safety by protecting the driver from impact in a frontal collision.

4

0

Share

What transmission does the Lavida naturally aspirated engine use?

What's the reason for the engine not starting?

What are the differences between halogen, xenon, and LED headlights?

Why does the engine shake when the car's air conditioning is turned on?

What type of transmission is used in the Senova X65?

What to Do When the Steering Wheel Locks After a Car Goes Through Water?

Is the Senia R7 an SUV?

What to Do After Rear-Ending Another Car and Reporting to Insurance?

How to File an Insurance Claim for a Rear-End Collision with Full Liability?

What is the fuel consumption of the latest Tayron model?

What is the vehicle inspection period at the DMV?