What transmission does the Lavida Classic use?

What kind of engine oil is good for Jetta?

Jetta is good with 5w40 engine oil, which has the functions of lubrication, cleaning, sealing, buffering, rust prevention, and heat dissipation. Taking the 2019 Jetta as an example, it belongs to the compact SUV category, with body dimensions of: length 4419mm, width 1841mm, height 1616mm, wheelbase 2630mm, fuel tank capacity 51l, and curb weight 1310kg. The 2019 Jetta has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.5l turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, and is paired with a 5-speed manual transmission.

18

4

Share

How much should the car shake during hill start before it can move off?

During hill start, the car needs to shake to the semi-engaged clutch state. The clutch semi-engagement refers to the unstable connection working state of the clutch, where the driver depresses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and driven plate to be in a state of simultaneous rotation and slipping. Relevant information about the clutch is as follows: 1. Introduction: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Friction clutch: The friction clutch is the most widely used and historically oldest type of clutch. It basically consists of four parts: the driving part, the driven part, the pressing mechanism, and the operating mechanism.

6

0

Share

How deep is the sidewall scratch allowed for Michelin tires?

For scratches that are not severe and do not damage the cord layer, meaning the tire's structure is not compromised by the scratch and there is no air leakage, repair or replacement may not be necessary. However, for safety reasons, it is still advisable to have the tire inspected at a professional repair shop and perform a dynamic balance test on the wheel with sidewall scratches. Below are some precautions regarding tire purchase and usage: 1. When purchasing tires, always check the production date: Avoid buying tires with production dates that are too old. Tires are rubber products and can age even if not used. 2. During regular use, frequently check tire pressure and the surface for any damage: The tire sidewall is relatively fragile, and if it is cut or punctured, it cannot be repaired. It is recommended that car owners replace their tires every four years, even if the mileage driven within those four years is low.

19

0

Share

What Do the Letters on Michelin Tires Mean?

An example to illustrate the meanings of the numbers and letters in a Michelin tire model: 225/60R1799H. 1. 225: Represents the section width, simply understood as the width of the tire tread. 2. 60: Represents the aspect ratio, simply understood as the height of the tire sidewall. 3. R: Represents the tire type code, where R stands for radial tire. 4. 17: Represents the rim diameter, indicating the tire is suitable for 17-inch rims. 5. 99: Represents the load index of the tire, which is the maximum weight the tire can bear. 99 corresponds to a maximum load capacity of 775KG. 6. H: Represents the speed rating of the tire, which is the maximum speed the tire can handle. H corresponds to a maximum speed of 210KM/H.

20

1

Share

What are On-Demand 4WD, Part-Time 4WD, and Full-Time 4WD?

Here is the relevant introduction to Part-Time 4WD, Full-Time 4WD, and On-Demand 4WD: 1. Part-Time Four-Wheel Drive: This means the driver can choose between four-wheel drive (4WD) and two-wheel drive (2WD). The switching mode is usually controlled via a knob or lever. 2. Full-Time Four-Wheel Drive: Unlike Part-Time 4WD, Full-Time Four-Wheel Drive (AWD) means all four wheels are always driven, whether driving straight or turning. It also generally allows adjusting the power distribution ratio between the front and rear drive wheels based on driving conditions. 3. On-Demand Four-Wheel Drive: This refers to a drive system where the vehicle automatically uses two-wheel drive when 4WD is not needed and switches to four-wheel drive when necessary.

6

2

Share

What are the precautions for replacing parts?

The precautions for replacing parts are: 1. Refer to the maintenance manual when replacing parts; 2. Pay attention to the specifications of the screws and the force used, and tighten the screws after proper assembly; 3. Pay attention to the assembly sequence and cleanliness; 4. Check if the part's trademark and identification are complete, if the outer packaging is intact, and if the printing on the packaging box is clear; 5. Pay attention to the quality of the parts, carefully inspect for rust spots, cracks, and deformation defects before use; 6. When replacing gears, double-row sleeve roller chains in the transmission box, and the driving and driven sprockets, they should be replaced in pairs; 7. When replacing the cylinder liner, the piston and piston rings should also be replaced simultaneously.

2

1

Share

What transmission does the Lavida Classic use?

What kind of engine oil is good for Jetta?

How much should the car shake during hill start before it can move off?

How deep is the sidewall scratch allowed for Michelin tires?

What Do the Letters on Michelin Tires Mean?

What are On-Demand 4WD, Part-Time 4WD, and Full-Time 4WD?

What are the precautions for replacing parts?

Where is the cabin air filter located in the Zotye T500?

What is the function of the three differential locks on the Mercedes-Benz G?

Which company owns the Hongqi brand?

What Does the Mercedes-Benz Three Guarantees Policy Include?