What transmission does the Jetta VS5 use?

1 Answers
VonFinn
07/29/25 5:27pm
Jetta VS5 is equipped with the Aisin third-generation 6AT transmission, model number AQ250. Below is some knowledge about transmissions. Functions of the transmission: It changes the gear ratio between the engine and the wheels. This allows the engine to operate under optimal conditions, expanding the torque and speed transmitted to the drive wheels, and achieving different speeds. It enables the car to reverse and includes a neutral setting. Maintenance of transmission structural components: Daily maintenance of the transmission should focus on its structural parts, including gears, bearings, and different shafts. It is important to regularly check the transmission gears for wear, chipping, or incorrect meshing. Bearings should be inspected for excessive axial or radial clearance and wear of spacers. Proper care and inspection of internal transmission components ensure optimal operation and timely identification and resolution of issues.
Was this review help?
3
4
Share
More Forum Discussions

Is it mandatory to purchase new car insurance at a 4S dealership?

Whether new car insurance must be purchased at a 4S dealership depends on the situation. For cars purchased with consumer loans at a 4S dealership, if the bank or financial institution has mandatory requirements, you must purchase the specified insurance when picking up and registering the vehicle. The following are considerations when purchasing insurance: Choosing an insurance company: If you choose to purchase car insurance yourself, the first step is to find a suitable insurance company. Be cautious when selecting small insurance companies, especially those that are not well-known. This is because claims settlement can be difficult and troublesome with such companies, and their limited nationwide service networks may cause car owners to waste a lot of time on procedures. Selecting insurance items: When insuring a new car, choosing the right items is crucial. The first item to purchase is vehicle damage insurance, which offers high cost-effectiveness and covers minor scratches and collisions. Next is third-party liability insurance, which serves as an excellent supplement to compulsory traffic insurance. It costs slightly more but provides significantly higher coverage. Additionally, if you don’t have a garage or a fixed parking space, theft insurance is necessary. Other additional insurances can be selected based on your needs. Points to note regarding purchasing methods: Currently, the more common methods for purchasing car insurance are phone-based and online insurance. Both are much cheaper than traditional car insurance and are very convenient, allowing you to handle vehicle insurance without leaving your home. You can also call the official PICC hotline for consultation.
4
5
Share

How many days after the vehicle's mortgage is lifted can it be transferred?

Vehicle can be transferred the next day after the mortgage is lifted. Retrieving mortgage procedures: After the last monthly payment of the car loan is deducted, it takes about 10 working days to retrieve the mortgage procedures from the bank that handled the car installment payment. For credit card car installments from the bank, it is best to call the bank's customer service in advance to confirm whether the payment has been fully settled. The customer service number can be found on the back of the repayment card. For car loans processed through a financial company, you can call the customer service of the respective financial company or consult the car dealer for assistance. Motor vehicle registration: To retrieve the motor vehicle registration certificate, the owner must present their ID card. Other documents that may be required include: the motor vehicle license and bank repayment details. Processing the vehicle mortgage release: After obtaining the registration certificate, the next step is to go to the local municipal vehicle management office to process the vehicle mortgage release. The required documents include: the motor vehicle registration certificate, loan clearance certificate issued by the lending institution, the lender's organization code certificate, "Motor Vehicle Mortgage Registration/Pledge Filing Application Form", power of attorney, and the ID card of the vehicle owner.
6
5
Share

How to Replace Coolant in BYD F3?

The steps to replace coolant in BYD F3: 1. Turn off the ignition; 2. Let the engine idle until the coolant temperature drops to normal; 3. Pull the front hood release lever; 4. Open the front hood; 5. Slowly unscrew the radiator cap to release pressure; 6. Disconnect the radiator hose, drain the coolant, then reconnect it; 7. Fill the radiator with new coolant and tighten the cap. The BYD F3 has a body length, width, and height of 4533mm, 1705mm, and 1490mm respectively, with a wheelbase of 2600mm. It features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension. The BYD F3 is equipped with a 1.5L naturally aspirated engine paired with a 5-speed manual transmission, delivering a maximum power of 80kW and maximum torque of 148Nm.
13
2
Share

How to deal with polishing marks on black cars?

To deal with polishing marks on black cars, use G3 polishing wax for a one-time polish, followed by waxing. Precautions for car polishing include: 1. The key to operating a polishing machine is to maximize the polishing rate to quickly remove the damaged layer caused by grinding; 2. Ensure that the polishing damage layer does not affect the observed structure, i.e., it does not create a false structure. The purpose of car polishing is to eliminate fine scratches on the paint surface, address minor paint damage and various stains, thereby achieving a bright paint effect. After polishing, minor defects such as coarse particles, sandpaper marks, flow marks, whitening, and orange peel may appear on the paint film surface. To compensate for these defects, grinding and polishing are usually performed after spraying.
11
4
Share

What Does the Yellow Exclamation Mark Symbol in a Car Mean?

When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general malfunction, automatic transmission failure, abnormal tire pressure, or lighting system failure. Below is a detailed analysis of these four situations: General Malfunction: A triangle with an exclamation mark inside indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, indicating a transmission fault or low transmission fluid level. The transmission fluid should be replaced promptly. Abnormal Tire Pressure: A horizontal line with an exclamation mark inside parentheses represents the tire pressure monitoring warning light. This light turns on when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting System Failure: A yellow bulb with an exclamation mark is the lighting system warning light, indicating a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, or interior lighting to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a braking system warning, typically due to braking system failure or low brake fluid level. Immediate inspection of the braking system is required to avoid accidents.
15
4
Share

What is the function of a car dashboard?

The function of a car dashboard is: 1. A device that reflects the working conditions of various vehicle systems; 2. To provide the driver with necessary operational parameter information of the car. The car dashboard is a rigid panel or structural component used to install instruments and related devices. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. In terms of form, dashboards can be categorized into screen-type, frame-type, channel-type, and cabinet-type dashboards. The instruments may vary between different cars, but generally, conventional car instruments include the speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.