What transmission does the Jetour X70M use?

What does the EPC light on the dashboard mean?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other conditions. The power-on self-test is a pre-driving check of all vehicle sensors. Typically, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light remains on after starting the vehicle or illuminates under other circumstances, the common causes include faults in the engine intake system, throttle, fuel system, engine, ECU control unit, or brake lights. Here is a detailed explanation of the reasons for the EPC light illuminating under other conditions: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle fault: Carbon buildup is a common issue with the throttle. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: Issues such as substandard fuel, fuel degradation, or poor fuel atomization can cause the light to come on. Engine fault: Insufficient engine pressure or problems with components like the intake valve can also trigger the EPC light. ECU control unit fault: Interference with the vehicle computer signals or false alarms from the computer may cause the light to illuminate. Brake light fault: If the brake lights fail to turn on, the brake switch malfunctions, or there are issues with the brake wiring. Solutions for the EPC light illumination: Troubleshoot the intake system, use fuel with the appropriate octane rating, and clean the throttle. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains illuminated. If it does not, the issue may have been temporary. However, if the light stays on or frequently illuminates, it is advisable to drive to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to manage the powertrain. The EPC indicator light typically appears in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair shop. A red EPC light signifies a severe issue, requiring immediate stopping of the vehicle and contacting a professional for repairs. Continuing to drive with a red light may damage core components or compromise safety.

3

2

Share

How long will the China VI emission standards last?

The China VI emission standards for vehicles will remain in effect for quite some time, with requirements divided into two phases: "China VIa" and "China VIb". 1. China VIa: This phase serves as a transitional period between "China V" and "China VI". China VIa was implemented for gas-powered vehicles on July 1, 2019, and for urban vehicles (such as city buses, sanitation trucks, postal vehicles, etc.) on July 1, 2020. It has now been applied to all vehicles. 2. China VIb: This is the true "China VI" standard, which will be fully implemented for all vehicles on July 1, 2023.

8

4

Share

Do You Need a Driver's License to Operate a Self-Driving Car?

Operating a self-driving car requires a driver's license. The definition of self-driving is that the vehicle does not need a driver while in motion; self-driving cars do not require a driver. Here is some relevant knowledge about self-driving cars: 1. Purpose: Self-driving cars are a type of smart vehicle, also known as wheeled mobile robots, primarily relying on an onboard computer system-based intelligent driving system to achieve the goal of autonomous driving. 2. Safety: Safety is the main factor driving the demand for self-driving cars. The anti-lock braking system (ABS) can actually be considered a type of self-driving system. Although ABS requires driver operation, it can still serve as a representative of the self-driving system series because some functions of ABS previously required manual operation by the driver.

7

4

Share

Should a Turbocharged Car Use 92 or 95 Octane Gasoline?

The octane rating of gasoline for a turbocharged car should be based on the recommendations in the vehicle's official owner's manual. In addition to checking the appropriate octane rating in the owner's manual, you can also find it indicated on the fuel tank cap. Generally, the octane rating can also be determined by the engine's compression ratio. Cars with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is higher, 98 octane gasoline is recommended. However, with the use of some new technologies, the octane rating cannot be solely determined by the compression ratio. A high compression ratio can also be tuned to use lower octane gasoline because, in addition to the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong octane rating only requires switching back to the correct one after the tank is empty. However, long-term use of the wrong octane rating can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane number is too low, the lowered ignition point may cause the gasoline to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance will make the engine run very unstably. If the knocking is mild, it may only increase noise without significant damage to the engine. However, if the knocking is severe, it indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

12

5

Share

What is the difference between a full-size spare tire and a non-full-size spare tire?

Non-full-size spare tires are one size smaller than the tires used on the wheels. The differences between non-full-size spare tires and full-size spare tires are as follows: 1. Specifications: The size of a full-size spare tire is exactly the same as the other four tires on the vehicle, while the diameter and width of a non-full-size spare tire are slightly smaller than the other four tires. 2. Usage: A full-size spare can replace any temporarily or permanently unusable tire, whereas a non-full-size spare can only be used as a temporary substitute. 3. Replacement: Non-full-size spare tires can only be used on non-drive wheels, while full-size spare tires can replace any tire. 4. Space: Non-full-size spare tires take up less space in the car trunk, whereas full-size tires occupy more space.

19

1

Share

Can You Still Drive After Losing All 12 Points?

You cannot drive after losing all 12 points and must participate in a learning program before being allowed to drive again after passing the exam. Below is relevant information: 1. Scoring Cycle: When a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security organ shall detain their motor vehicle driving license. The motor vehicle driver must, within 15 days, attend a seven-day study program on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security organ where the driving license was issued or where the violation occurred. 2. Related Examination: After the motor vehicle driver completes the study program, the vehicle management office shall conduct a test on road traffic safety laws, regulations, and related knowledge within 20 days.

18

2

Share

What transmission does the Jetour X70M use?

What does the EPC light on the dashboard mean?

How long will the China VI emission standards last?

Do You Need a Driver's License to Operate a Self-Driving Car?

Should a Turbocharged Car Use 92 or 95 Octane Gasoline?

What is the difference between a full-size spare tire and a non-full-size spare tire?

Can You Still Drive After Losing All 12 Points?

Is It Normal for Car Wheels to Rust?

What Kind of Car is Considered a Stock Car?

What Does the Exclamation Mark on the Car Dashboard Mean?

What is a runaway truck ramp?