What transmission does the Geely Xingyue use?

What Causes the Starter Motor to Fail When the Engine is Hot but Starts Easily When Cold?

Difficulty starting a hot engine may be caused by fuel injector leakage, a faulty carbon canister purge valve, or fuel quality issues. Below are the reasons and solutions for hot engine starting difficulties: 1. Fuel injector leakage: While fuel injection is normal, leakage constitutes additional fuel supply. The more severe the injector leakage, the richer the air-fuel mixture becomes, leading to hard starting when the engine is hot. 2. Faulty carbon canister purge valve: During hot starts, fuel atomization is normally sufficient without requiring additional vapor. If the carbon canister continues supplying vapor to the intake tract, it creates an overly rich mixture, making starting difficult. 3. Fuel quality: After a hot engine shutdown, the engine compartment remains at high temperature. If the fuel is highly volatile, it can form excessive vapor pressure in the fuel rail. When this pressure exceeds the fuel system pressure, vapor lock occurs, causing the injectors to deliver overly lean fuel vapor and resulting in starting difficulties.

10

4

Share

Where is the battery located in the Mercedes-Benz ML350?

The battery of the Mercedes-Benz ML350 is located under the seat. You need to move the seat all the way forward or backward to remove the cover plate and see it. The cover plate should be removed from the rear first. When the car battery is dead, there are usually the following signs: 1. The engine won't start, and you hear a squeaking sound when trying to ignite; 2. Open the engine hood and observe the inspection hole on the battery - green indicates good condition, while black means there's a problem; 3. The battery warning light and engine warning light on the dashboard will illuminate. The dimensions of the Mercedes-Benz ML350 are 4844mm in length, 1926mm in width, and 1796mm in height, with a wheelbase of 2915mm. The ML350 features front-engine, four-wheel drive with a full-time 4WD system. The front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension.

8

4

Share

Where is the Peugeot 408 window reset button located?

The Peugeot 408 window reset button is the window up/down switch. Press the window switch all the way down, hold for 3 seconds, then press it all the way up and hold the switch for 3 seconds without releasing. Methods to restore malfunctioning window operation: If the window regulator circuit has aged or short-circuited, causing button failure, or if the regulator malfunctions, it needs to be repaired at a 4S shop or repair shop. Check if the window lift motor circuit is disconnected. If disconnected, press the power-off button, and when it pops back up, the power will be restored. Composition of window regulator: The electric window regulator consists of a motor, reducer, guide rope, guide plate, and glass mounting bracket. The window regulator is the lifting device for car window glass, mainly divided into electric regulators and manual regulators.

18

3

Share

When to Use High Beams in a Car?

Scenarios for using high beams in a car: High beams should be used on roads at night without streetlights or with poor lighting; on sparsely trafficked roads, when passing corners, curves, or intersections without traffic signals, reduce speed and alternately switch between high and low beams as a warning. Urban roads typically have streetlights, so high beams are rarely needed, generally only in remote areas or on highways. After turning on the high beams, don't forget to switch them off when necessary. Not switching to low beams when meeting another vehicle on regular roads can make it nearly impossible for the oncoming driver to see anything, effectively driving blind. This is extremely dangerous if there are pedestrians crossing the road, obstacles ahead, or non-motorized vehicles, as they become virtually invisible. Using high beams when too close to the car ahead can also dazzle the driver, impairing their vision and reducing the visible range ahead. Especially when changing lanes, it becomes harder to see the situation of vehicles behind and judge the distance accurately.

12

4

Share

What is the fuel tank capacity of the LX570 in liters?

The fuel tank capacity of the Lexus LX570 is 138 liters, as officially announced by the manufacturer. The Lexus LX570 requires 92-octane gasoline, with a fuel consumption of 14.7L per 100 kilometers. A full tank can provide a driving range of approximately 938km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the nominal capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill limit. There is additional space between the safe fill limit and the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the nominal tank capacity.

18

5

Share

Is the new Audi Q7's four-wheel drive system equipped with Torsen?

Audi Q7 uses a Torsen differential. The Q7 shares the same four-wheel drive structure as the Q5, both featuring a full-time four-wheel drive system primarily based on the Torsen central differential structure. Advantages of on-demand four-wheel drive: It is suitable for models with a front transverse engine and front-wheel drive platform, enabling many SUVs or four-wheel drive sedans built on this platform to be equipped with a four-wheel drive system. Compared to rear-wheel drive platforms, front-wheel drive platforms are more conducive to expanding interior space, offer higher transmission efficiency, and produce less noise from the transmission system. Disadvantages of on-demand four-wheel drive: Most on-demand four-wheel drive systems are limited by structural flaws when transferring power between the front and rear axles, making it impossible to deliver more than 50% of the power to the rear axle.

7

4

Share

What transmission does the Geely Xingyue use?

What Causes the Starter Motor to Fail When the Engine is Hot but Starts Easily When Cold?

Where is the battery located in the Mercedes-Benz ML350?

Where is the Peugeot 408 window reset button located?

When to Use High Beams in a Car?

What is the fuel tank capacity of the LX570 in liters?

Is the new Audi Q7's four-wheel drive system equipped with Torsen?

What does the wrench light mean?

What does a red car battery indicator mean?

Is it necessary to equip a car with a fire extinguisher?

Which automaker does Infiniti belong to?