What transmission does the Fengshen AX7 use?

1 Answers
Freddie
07/29/25 6:34pm
Fengshen AX7 uses a 6AT transmission, which offers good reliability, smoothness, and durability. The 2020 Fengshen AX7 is equipped with a 1.6-liter turbocharged engine across the lineup, delivering a maximum power of 170 horsepower and a peak torque of 250 Nm. The engine reaches its maximum power at 5,500 rpm and achieves peak torque between 1,750 to 4,500 rpm. The Fengshen AX7 is developed and manufactured by Dongfeng Fengshen, a Chinese domestic brand SUV. Its body dimensions are 4,645 mm in length, 1,880 mm in width, and 1,690 mm in height, with a wheelbase of 2,715 mm.
Was this review help?
19
2
Share
More Forum Discussions

What is the symbol for gasoline engine oil?

The oil filler cap symbol is located on a cap with an oil can symbol near the engine. Additional information: 1. A car without oil generally exhibits the following symptoms: (1) The warning light will illuminate. (2) Valve noise. (3) Knocking sounds. 2. Functions of engine oil: (1) Lubrication. (2) Cleaning. (3) Rust prevention. (5) Cooling, among others. 3. Composition of engine oil: (1) Consists of hydrocarbons, poly-alpha-olefins (PAO), and polyinternal olefins (PIO), all of which are organic compounds composed solely of carbon and hydrogen. (2) Some high-grade engine oils may contain up to 20% esters.
16
4
Share

What is the difference between small and large wheel hubs?

Vehicles equipped with large wheel hubs exhibit less deformation under high-speed cornering with significant lateral forces, offering higher handling sensitivity but poorer comfort, making them suitable for use under good road conditions. Vehicles with small wheel hubs provide higher comfort and can be used on roads with poorer conditions. Additional information: 1. Enhanced visual effects: The most notable advantage of large-sized wheel hubs is the improvement in visual effects. Automotive design is a science, and the size and style of wheel hubs serve as important tools for conveying automotive aesthetics and emotions. Often, the brand of a car can be identified just by looking at its wheel hubs. Therefore, the size of wheel hubs is not only important but also highly nuanced, grounded in certain theoretical principles. Generally, if the height of the wheel hub reaches half of the vehicle's maximum height, the car will appear dynamic and elegant. 2. Common sizes: Typically, base models come with relatively smaller wheel hubs, while higher-end models feature larger ones, though the difference is usually not substantial. For example, if a base model has 16-inch wheel hubs, the higher-end version might have 17-inch ones. For larger vehicles like SUVs, starting with 19-inch wheel hubs is quite common.
1
4
Share

How many kilometers can a BMW X5 travel on a full tank of gas?

BMW X5 models of different versions have the same fuel tank capacity. The distance that can be traveled on a full tank of gas is as follows: For models equipped with a 245-horsepower engine and an 83L fuel tank, the distance on a full tank is: 83/9.3*100=892km For models equipped with a 245-horsepower engine and an 83L fuel tank, the distance on a full tank is: 83/8.9*100=932km For models equipped with a 333-horsepower engine and an 83L fuel tank, the distance on a full tank is: 83/9.3*100=892km Currently, the BMW X5 has four models: the BMW X5 2022 xDrive30Li comes in two versions—Premium M Sport Package and M Sport Package. Models equipped with a 245-horsepower engine have a WLTC fuel consumption of 8.9L per 100km. The BMW X5 2022 xDrive40Li also comes in two versions—Premium M Sport Package and M Sport Package. Models equipped with a 333-horsepower engine have a WLTC fuel consumption of 9.3L per 100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is less likely to atomize during cold starts, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, in low temperatures, the engine's computer controls higher idle speeds to warm up the engine, which also increases fuel consumption.
17
5
Share

What documents are required for driving school registration?

Original ID card (temporary residence permit is also required for non-local residents) and 7 photos (6 photos for local residents, all one-inch color photos with white background) as well as money. The following is relevant information about driving schools: 1. Introduction to driving schools: Driving schools are training institutions that help people master driving skills, teach them safe and civilized driving, and assist them in obtaining driver's licenses by passing vehicle administration department exams. They should be classified under the transportation industry's training category according to directory classification, but due to high marketization, a more reasonable classification would be under the service industry in the tertiary sector. Generally, they refer to motor vehicle driver training schools, and sometimes pilot training schools can also be abbreviated as driving schools. 2. Registration instructions for driving schools: Applicants for small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and light motorcycles must be between 18 and 70 years old, etc.
13
0
Share

Where is the best place to wire the dash cam?

It is better to wire the dash cam to the ACC fuse. Below are several options for dash cam wiring locations: 1. Cigarette lighter wiring: This is the simplest method, just plug it directly into the cigarette lighter. After power is obtained, route the wires through areas like the glove box or A-pillar. This method occupies the cigarette lighter, and the wiring in the glove box area cannot be hidden. 2. Direct battery wiring: This requires running wires from the cabin into the engine compartment and connecting directly to the positive and negative terminals of the battery. This method does not allow manual power-off, or manual power-off is very inconvenient. 3. ACC power supply: There is usually a secondary fuse box below the steering wheel on the driver's side. Find the ACC fuse and insert the "fuse tap" directly into the ACC fuse. Refer to the user manual to determine the ACC fuse number. After obtaining power this way, it does not affect the vehicle's original power supply. When the vehicle's power is on, the dash cam starts receiving power. This method also requires using the A-pillar to hide exposed wires.
11
4
Share

What is the difference between nylon tires and steel wire tires?

Nylon tires and steel wire tires differ in the following aspects: Different structures: Nylon tires have a bias-cross structure; steel wire tires have a radial (vertical cross) structure. Different materials: The main material of nylon tires is nylon; the main material of steel wire tires is steel wire. Different manufacturing processes: Nylon tires are simpler; steel wire tires are more complex. Nylon tires are bias-ply tires, as opposed to radial tires. The carcass ply layers consist of multiple layers of rubber-coated fabric, with adjacent layers having the same cord angle. They are a traditional type of pneumatic tire with a long history of use and wide application range. Steel wire tires are radial tires, a structural form of tires that differs from bias-ply tires, arched tires, and adjustable-pressure tires. Their cross-section is circular, with a copper-plated layer on the steel wire surface. The carbon content of the bead wire is 0.8% to 0.85%. When the bead wire diameter is 1.50 mm, its breaking force is 3700 N, with an elongation rate between 4% to 7% and a yield ratio between 90% to 97%.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.