What transmission does the Fengshen AX7 use?

1 Answers
AngelaFitz
07/29/25 5:15pm
Fengshen AX7 uses a 6AT transmission, which offers good reliability, smoothness, and durability. Here is more information about this vehicle: 1. The 2020 Fengshen AX7 is equipped with a 1.6-liter turbocharged engine across all models, delivering a maximum power of 170 horsepower and a maximum torque of 250 Nm. The maximum power is achieved at 5,500 rpm, while the maximum torque is available between 1,750 and 4,500 rpm. 2. The Fengshen AX7 is developed and manufactured by Dongfeng Fengshen, a self-owned brand SUV model. Its body dimensions are 4,645 mm in length, 1,880 mm in width, and 1,690 mm in height, with a wheelbase of 2,715 mm.
Was this review help?
11
5
Share
More Forum Discussions

How many days after passing the subject test can you take the subject three test for a driver's license?

There is an interval of 10-20 days between subject two and subject three. After passing subject two for 10 days, you can make an online appointment for the subject three test. The following is an introduction to the content and precautions of the subject three test: Test content: The subject three test includes road driving skill test and safe and civilized driving common sense test. Precautions: During the subject three test, you need to pay attention to checking the appearance and safety condition of the car in advance, check whether the lights of the car can work normally, strictly follow the requirements of the test during the test, do not drive over the line, and do not overspeed. Before getting into the car, carefully check whether you are safe, close the door when getting on and off the car, fasten your seat belt after getting into the car, turn on the low beam light before starting, turn off the turn signal in the middle gear, release the hand in time when starting in neutral gear, and fasten the seat belt before getting into the car.
20
1
Share

Why doesn't the passenger door unlock when opening an Audi?

Audi unlocking the passenger door may not open due to a malfunction in the central locking mechanism of the door. Relevant information about Audi is as follows: 1. Brand Culture: Learning is the driving force behind improving personnel quality. Strong learning capabilities enable adaptation to various environmental changes, maintaining vigorous vitality in the fierce market competition. Innovation is the foundation for sustainable corporate development, enabling management to continuously advance to deeper levels. Cooperation runs through all work processes, with the integration of Chinese and German cultures, and good team building ensures the completion of work objectives. Dedication is a reflection of responsibility; proactive and intelligent work is an essential quality for modern individuals. 2. Product Lineup: Audi focuses on the mid-to-high-end automotive market, primarily offering sedans and SUVs. In 2021, CEO Markus Duesmann stated in an interview with Germany's Frankfurter Allgemeine Zeitung that Audi plans to halt the development of new internal combustion engine projects. Markus pointed out that in many regional markets, the development of energy supply and charging infrastructure remains relatively low. In such regions, Audi will continue to sell internal combustion engine models for several years but will not develop a new generation of gasoline or diesel engines.
13
4
Share

What are the methods for beginners to reverse a car?

Methods for beginners to reverse an automatic transmission car: 1. Step on the foot brake, shift from N to R gear, and release the handbrake; 2. Observe the rear route from the rearview mirror, then release the foot brake; 3. After reversing to the designated position, step on the foot brake, pull up the handbrake, and then release the foot brake; 4. Step on the foot brake, shift from R to N gear, and release the foot brake. Methods for reversing a manual transmission car: 1. Start the car and press the clutch pedal all the way down; 2. Engage the reverse gear, release the handbrake, and lift the clutch to the semi-engaged state; 3. Slowly lift the clutch to let the car move backward. Reversing refers to the act of moving a motor vehicle backward. When reversing, it is advisable to choose to reverse from the left side, as it makes it easier for the driver to observe. During the reversing process, first look behind, then pay attention to the side rearview mirrors.
5
3
Share

Why is there an oil film after the wiper wipes?

An oil film appearing after the wiper wipes is usually caused by exhaust emissions from vehicles ahead during traffic congestion, or it may result from parking near exhaust vents of range hoods. Wiping the windshield with hot water can remove the oil film, or you can use dishwashing liquid to clean the windshield. Wipers, also known as windshield wipers, water wipers, or windscreen wipers, are devices used to wipe away raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and enhance driving safety. Due to legal requirements, almost all vehicles are equipped with wipers. Rear windows of hatchbacks and SUVs also have wipers.
12
2
Share

What Causes Low Tire Pressure in Audi Cars?

Audi car tire pressure insufficient reasons: If no visible damage is found, you can directly inflate the tire to normal pressure and reset the tire pressure system; If inspection reveals the tire is punctured, promptly drive to a tire shop for repair, then reinflate; If the low tire pressure warning reappears some time after inflation without any puncture, it may be due to air leakage caused by wheel rim deformation. It is recommended to check the wheel rim and replace it if necessary. Hazards of low tire pressure: Increased friction coefficient with the road surface leads to higher fuel consumption; Causes heavy steering and tendencies to veer off course, compromising driving safety; Increases movement of tire components, leading to abnormal heating due to excessive rolling; Reduces functionality of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim resulting in bead damage and abnormal wear; Multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts; Increases tire body deformation, making sidewalls prone to cracking, and induces flexing movements that cause excessive heat, accelerating rubber aging, cord fatigue, and breakage, while also enlarging the tire's contact area with the ground and hastening shoulder wear.
6
5
Share

What Causes the Friction Sound in the Steering Wheel of Hyundai Elantra?

Modern Elantra steering wheel friction sound is caused by excessive gear clearance in the steering gear, excessive clearance in the universal transmission device, or damage to the shock absorber pressure bearing. After abnormal noise occurs in the steering wheel, first check the source of the noise, then replace or repair the noisy components. Below are the details: Excessive gear clearance: The spring presses the rack against the steering gear through a pressure block to ensure backlash-free meshing. The preload of the spring can be adjusted with an adjustment screw. In the rack-and-pinion steering gear, the steering pinion, which serves as the driving element of the transmission pair, is installed in the housing and meshes with the horizontally arranged steering rack. Excessive universal transmission device clearance: Excessive rotational clearance in the drive shaft can cause abnormal noises during acceleration and deceleration, as well as issues like body vibration. This cannot be adjusted and is a problem of machining precision. Solution: Visit a 4S shop or auto repair shop to replace components with excessive clearance, such as the universal joint (rear drive), CV joint, or replace the original drive shaft assembly. Damaged shock absorber pressure bearing: Go to a 4S shop or auto repair shop for inspection to determine whether the pressure bearing damage is due to improper installation, lubrication issues, or component problems.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.