What transmission does the Envision use?

2 Answers
VanMatthew
07/29/25 8:37am
1.5L versions of the Envision use a 7-speed dual-clutch transmission, while 2.0L versions are equipped with a 9-speed automatic manual transmission. The Envision measures 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. The front end features the brand's signature waterfall-style chrome grille, wing-shaped intelligent xenon headlights, boomerang-shaped LED daytime running lights, and streamlined exterior mirrors, creating a sharp and dynamic visual effect. The body incorporates full-frame integrated chrome window trim, roof-line-following aluminum roof rails, and class-leading 19-inch alloy wheels, delivering striking visual impact.
Was this review help?
20
3
Share
McRyder
08/11/25 6:12pm
I've been driving the Buick Envision, which comes with a 9-speed automatic transmission that delivers an exceptionally smooth ride with almost no noticeable gear shifts. I've experienced seamless acceleration both in the city and on the highway, and the fuel efficiency is better than the previous 6-speed model. If you're concerned about gear shift issues, remember to regularly check the transmission fluid—changing it every 50,000 to 60,000 kilometers can extend its lifespan. Additionally, this transmission is designed to optimize fuel efficiency, making it great for daily commutes or trips, offering a quiet and comfortable drive. When I compared it to other SUVs during my car selection process, the Envision's setup really made it stand out.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How to Repair a Cracked Vehicle Bumper?

Using a specialized chemical compound to repair the bumper is a good method, and it is very simple to operate. Anyone can perform the repair. Although it may be difficult to restore it to its original new condition, the repair can be done so well that it's hard to notice unless closely inspected. When a car bumper is cracked, we can use heat to melt plastic welding rods and the surface of the film to achieve melting and bonding. Of course, after repairing the crack, it's necessary to apply touch-up paint and then dry it to complete the job. If the front bumper is cracked, the decision depends on the specific situation—whether to repair it or purchase a new part. Check the material of the front bumper. If the front bumper is made of plastic, it can be repaired with adhesive and touch-up paint to restore its original appearance. If it's made of carbon fiber, it can also be repaired, but the equipment required for this material is special and differs from plastic welding guns. The repair process is somewhat challenging, and the results are usually average. Consider the size of the "hole" caused by the impact. If it's too large or the cost of repairing it to its original state is close to the price of an original replacement part, such as a rear bumper, then the above-mentioned repair methods may not be meaningful. In such cases, it is recommended that the owner directly purchase an original front bumper replacement.
7
3
Share

How Long Does Audi Individual Customization Take?

Audi individual customization generally takes 3-6 months. Below are specific details about Audi individual customization: 1. Project Introduction: The Audi individual customization platform is integrated into the official Audi online store—Audi Online 4S Shop. The first model to launch this service, the Audi Q2L, offers over 55 customizable high-perception configurations and more than 50,000 personalized customization combinations. 2. Individual Customization: True individual customization is achieved through vehicle modification. The Audi-approved tuning brand MTM offers individual kits that can meet various owner demands for their vehicles, covering exterior, interior, and performance upgrades.
7
0
Share

What Causes the Buzzing Noise at 110-120 km/h on the Highway?

Running at 110-120 km/h on the highway with a buzzing noise can be attributed to the following reasons: 1. Engine knocking: Caused by the use of substandard or low-grade fuel. 2. Incorrect engine timing control: Such as an excessively advanced ignition timing, which requires readjustment. 3. Excessive carbon buildup inside the engine: Initial attempts can be made with carbon cleaning without disassembly or by driving at high speeds to test the cleaning effect. Otherwise, disassembling the engine for carbon cleaning may be necessary, often accompanied by severe oil burning in more serious cases. 4. Engine misfire: If one cylinder is not functioning, the engine becomes unbalanced, leading to abnormal noises, along with severe shaking, lack of power, and other malfunctions. This could be due to faults in the ignition module, spark plugs, or fuel injectors, requiring replacement of the corresponding parts.
5
1
Share

Where is the BMW X3 door lock button located?

On the driver's door. The locked padlock icon on the car remote also serves as the locking function. Below are some distinctive features of BMW vehicles: 1. Exterior: BMW sedans have a distinctive body design, with round lamps paired with rectangular radiator ventilation grilles creating a unique style. BMW's business philosophy has its own unique aspect - it follows a "boutique strategy" brand approach, pursuing the highest quality rather than following trends or resorting to global sourcing to reduce costs. 2. Performance: Similarly adhering to its design direction, all BMW sedans are rear-wheel drive. The rear-wheel-drive configuration allows for a 50-50 weight distribution between front and rear, resulting in better performance during high-speed cornering and straight-line driving compared to front-wheel-drive cars. Due to their excellent acceleration and driving performance, there's a saying in the automotive world: "Drive a BMW, ride a Mercedes," primarily attracting middle-aged and younger buyers.
11
5
Share

Is it okay to leave the car key inserted in the car all the time?

Leaving the car key inserted in the car all the time won't affect the vehicle, but it's not recommended for safety reasons. The basic components of a remote key consist of the following two points: 1. Transmitter: Composed of a transmission switch, transmission antenna, integrated circuit, etc., containing an identification code storage circuit and amplitude modulation circuit, with a button-type lithium battery installed on the opposite side of the circuit. The transmission frequency uses radio waves, and the transmission switch button sends a signal once each time it is pressed. 2. Receiver: After the transmitter sends the identification code using shortwave modulation, it is received by the car's shortwave antenna and enters the shortwave high-frequency amplification processor of the receiver's electronic control unit through a distributor for demodulation, where it is compared with the identification code in the demodulator.
15
1
Share

What Causes Loud Car Fan Noise?

There are several reasons for loud car fan noise: 1. Excessive bearing wear: Check the radiator and surrounding components to see if the bearing is excessively worn. If so, simply replace the bearing. Also, check if the fan blades are rubbing against anything. If not, the fan is likely faulty, and replacing the fan bearing or coupling should resolve the issue. 2. Fan blades: Inspect the horizontal and vertical clearance of the motor rotor shaft. If no issues are found, remove the motor and fan to check for any deformation in the fan blades. Currently, most auto repair shops typically replace the entire motor. If the problem persists, open the motor to check if the rotor is rubbing against the stator.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.