What transmission does the Elantra use?

How to Turn On the Rear Window Wiper?

The method to turn on the rear window wiper mainly includes: 1. Adjust the wiper switch forward and backward to switch between front and rear wipers, and adjust up and down to change the wiper speed. 2. Push the wiper switch one notch toward the driver to adjust the front windshield wiper, and push another notch to activate the front windshield cleaning function. 3. Push the switch one notch toward the front of the car to adjust the rear glass wiper, and adjust the wiper speed by moving it up and down after pushing the notch. Additional note: It is recommended not to use the rear window wiper frequently because the rear window is more prone to accumulating dust and dirt, and it does not have a cleaning function. Using it on non-rainy days may cause scratches on the glass.

15

1

Share

How to reset the maintenance light on the Jetour X90?

Here are the steps to reset the maintenance light on the Jetour X90: 1. Turn off the ignition switch and hold down the mode switch. 2. Turn on the ignition switch and then release the mode switch. 3. Within 30 seconds, simultaneously press the mode switch and the clock switch (press time < 2s), and the maintenance light will be reset. Here are the reasons why the engine maintenance light may illuminate on the Jetour X90: 1. Carbon deposits in the intake tract or on the piston top can cause poor atomization, leading to incomplete combustion and triggering the pollution light. 2. Faults in the sensor or the computer board itself can cause the pollution light to illuminate.

14

2

Share

What are the power specifications of the Lynk & Co 03+?

The Lynk & Co 03+ is equipped with a 2.0T turbocharged engine. The 03+ features a high-power version of the 2.0T turbocharged engine, which delivers a maximum power output of 187kW. As the first high-performance model launched by Lynk & Co, the 03+ boasts a maximum torque of 350Nm, paired with an 8-speed automatic transmission that matches the engine perfectly. Additional Information: While pursuing speed and handling, the Lynk & Co 03+ also provides enhanced safety protection. It comes with globally leading active and passive safety systems and utilizes BorgWarner's fifth-generation intelligent sports all-wheel-drive system to ensure vehicle stability.

1

0

Share

Which Lights to Use in Heavy Fog?

In heavy fog, you should turn on the fog lights. If visibility is extremely low, you should also activate the hazard warning flashers. Driving in foggy conditions significantly reduces visibility and limits the driver's line of sight. Fog lights have strong light penetration, which can enhance visibility for both the driver and other road users, allowing approaching vehicles and pedestrians to spot each other from a greater distance. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically a bright yellow color, while rear fog lights are red. The symbol for front fog lights features downward light beams, whereas the rear fog light symbol shows parallel beams. In foggy weather, both front and rear fog lights are usually used together. Fog lights are highly bright and penetrating, and they do not cause diffuse reflection due to fog. Therefore, using them correctly can effectively prevent accidents.

19

3

Share

What is the fuel consumption of the Mondeo Zhisheng 2.3?

The actual fuel consumption of the Ford Mondeo Zhisheng 2.3 is approximately 14 liters per 100 kilometers, which is considered quite high. The fuel consumption here refers to the amount of fuel consumed by the car when driving 100 kilometers. However, other aspects of this car are excellent, with specific details as follows: 1. Exterior Design: The Ford Mondeo Zhisheng and Ford Focus feature a stylish and dynamic exterior design, with drag coefficients of 0.297 and 0.31, respectively. 2. Body Lines: The streamlined body lines not only demonstrate a poised yet dynamic, ready-to-go momentum but also catch the eye. 3. Driving Safety: At the same time, this reduces air resistance, making driving smoother and safer.

7

2

Share

What Causes Clutch Pedal Vibration?

Clutch vibration causes and solutions mainly include: 1. Uneven pressure distribution in the car clutch, leading to loose or broken springs and incorrect pressure positioning, resulting in clutch instability. Solution: Readjust the pressure distribution of the car clutch. 2. Excessive tension in the clutch pressure spring, causing clutch vibration. Solution: Replace with a properly sized clutch pressure spring. 3. Insufficient lubrication in components such as the release sleeve and release fork shaft, leading to clutch vibration. Solution: Add lubricant between the release sleeve and release fork shaft components. 4. Oil contamination or cracks in the driven disk lining, or uneven thickness of the driven disk causing vibration. Solution: Replace the damaged driven disk lining. 5. Bent driving or driven disks, or inconsistent height of release levers causing clutch vibration. Solution: Identify the fault and complete repairs.

16

0

Share

What transmission does the Elantra use?

How to Turn On the Rear Window Wiper?

How to reset the maintenance light on the Jetour X90?

What are the power specifications of the Lynk & Co 03+?

Which Lights to Use in Heavy Fog?

What is the fuel consumption of the Mondeo Zhisheng 2.3?

What Causes Clutch Pedal Vibration?

Which is better, SL or SN engine oil?

What Causes the Clicking Sound When Braking to the Bottom?

What to Do When Wiper Blades Don't Clean Properly?

How to Deal with Frost on Cars in Winter?