What transmission does the Dongfeng Fengdu MX6 use?

1 Answers
McJohnny
07/25/25 1:41am
Dongfeng Fengdu MX6 uses a CVT transmission. The CVT transmission is a common automatic transmission with a very simple internal structure, consisting of only two cone wheels and a steel belt. The steel belt can move on the cone wheels, allowing the transmission to change speed and torque. The CVT transmission can achieve continuously variable transmission within a fixed speed ratio range, and there is no jerking during the shifting process. This type of transmission cannot be used with engines that have very strong power. The body dimensions of the Dongfeng Fengdu MX6 are: length 4625mm, width 1790mm, height 1735mm, wheelbase 2630mm, with front-wheel drive and front four-wheel drive options, and a fuel tank capacity of 65 liters.
Was this review help?
8
1
Share
More Forum Discussions

What Are the Main Differences Between Sedan and Hatchback Cars?

Introduction to the main differences between sedan and hatchback cars: 1. Structural Differences. 1. Sedan: The body structure consists of three separate and enclosed compartments with distinct purposes. The three compartments are the front engine compartment, the middle passenger compartment, and the rear luggage compartment. 2. Hatchback: The driver's cabin and the trunk share the same compartment, while the engine is independently arranged. 2. Feature Differences. 1. Sedan: Sedans have a higher middle section and lower front and rear ends, appearing symmetrical from the side. The downside is their longer body length, which makes parking less convenient. 2. Hatchback: The rear door is spacious, offering flexible and versatile use. It provides excellent frontal collision protection. Hatchbacks extend the passenger compartment almost uniformly backward, merging the rear luggage compartment with the passenger compartment, reducing it to two "compartments": the engine compartment and the passenger compartment. When the rear seats are folded down, it offers significantly more cargo space than a sedan, suitable for transporting large household appliances and items. 3. Vehicle Type Differences. 1. Sedan: Typically used in mid-to-large-sized cars and SUVs, such as the Santana and Jetta. 2. Hatchback: Commonly found in small and compact cars, such as the Fukang and POLO models.
15
2
Share

Does ETC installation require a power source?

ETC installation does not require an external power source, as the ETC device uses its own built-in power supply. The ETC electronic tag consumes power, but it does not need regular charging during normal use because there is a solar panel on the back of the battery that allows it to charge itself. During installation, it is important to avoid the black areas on the windshield. The built-in battery typically has a lifespan of 3-5 years. ETC stands for Electronic Toll Collection. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, a valid ID card of the agent is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, you will need a bank card for deducting highway tolls, and the applicant must be between 18 and 60 years old, with the vehicle registered under their name. How ETC works: The vehicle-mounted electronic tag installed on the windshield communicates with the microwave antenna in the ETC lane at toll stations. Using computer networking technology, the system settles payments with the bank in the background, allowing vehicles to pass through highway or bridge toll stations without stopping to pay tolls. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions as vehicles pass through toll stations without stopping; Cost-saving: Reduces vehicle wear and fuel consumption by minimizing start-stop cycles, and users can enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment systems, ETC technology is more mature and advantageous.
12
5
Share

Where is the ETC installed on the front windshield?

The installation position of the ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, it should be installed in the microwave sunroof strip. ETC stands for Electronic Toll Collection. To apply for an ETC, you need to provide the original and photocopy of the vehicle owner's valid ID and vehicle registration certificate. If the application is not made by the owner, the agent's valid ID must also be provided. The photocopy of the vehicle registration certificate should include the page stamped with the latest annual inspection. Additionally, a bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not obstruct the driver's view. It is best to install it behind the rearview mirror: Many car models have a steeply angled windshield, which can reduce the driver's field of vision. If the ETC is installed without considering this, it may increase the driver's blind spots. Installing it on the right side behind the rearview mirror can help avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle in front due to its ETC device malfunction, maintain a distance of more than 10 meters from the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failed fee deductions due to the inability to read the vehicle's device information. If a debit card is linked to the ETC, insufficient balance may also cause fee deduction failures.
14
2
Share

Does installing snow chains affect tires?

Installing snow chains does have an impact on tires. The principle of snow chains is to increase friction between tires and snowy surfaces to achieve braking effect. Since force is mutual, snow chains will cause certain damage to car tires. Automotive snow chains are safety products specifically designed for vehicle driving safety. Their specially designed rough surfaces increase friction with the road surface, typically protecting tires from slipping and ensuring normal vehicle operation in snowy and muddy conditions. Particularly on snow-covered roads in winter, they can effectively maintain vehicle stability and driving safety.
13
1
Share

How Many Liters of Fuel Does a 2.0t Engine Consume Per 100 Kilometers?

2.0t engines typically consume around 11 liters of fuel per 100 kilometers. The following are specific factors that affect fuel consumption: 1. Fuel consumption is related to engine type: Turbocharged engines consume more fuel than regular engines because they intake more air, requiring more energy to convert the air. 2. Fuel consumption is related to driving habits: The vehicle's fuel consumption is influenced by the driver's habits, such as sudden braking and cold starts, which can increase fuel usage. 3. Fuel consumption is related to road conditions: Frequent driving on mountainous roads, steep roads, or in congested urban traffic can all lead to increased fuel consumption.
19
1
Share

What Causes Squeaking Tires While Driving?

Driving with squeaking tires may indicate issues with wheel bearings or transmission. Here are the detailed explanations: 1. Bearing Problem: Since bearings are wear-prone components, squeaking noises may occur when the mileage reaches 70,000-80,000 kilometers. If the noise persists when coasting in neutral at speeds of 80-90km/h, it is highly likely to be a bearing issue. 2. Transmission Differential Noise: Transmission sounds are more complex. If the noise occurs during turns and is not a bearing issue, consider whether it might be a problem with the differential.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.