What transmission does the Cadillac XT104 have?

1 Answers
ElianaDella
07/29/25 8:11pm
Cadillac XT104 is equipped with a 9AT transmission. The 9-speed automatic manual transmission is matched with a 2.0T engine, which perfectly reflects the car's performance through the combination of the transmission and engine, ensuring the car's power performance. Transmissions are divided into manual transmissions and automatic transmissions. The following are the differences between the two: 1. Different principles: A manual transmission uses a shift lever to change the gear meshing position inside the transmission, changing the transmission ratio to achieve shifting; an automatic transmission automatically shifts gears based on the car's speed and engine RPM. 2. Different characteristics: Manual transmissions are known for their stable performance, high transmission efficiency, and high fuel utilization; automatic transmissions are known for their ease of operation and flexible gear ratios. 3. Different components: Manual transmissions mainly consist of gears and shafts; automatic transmissions consist of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system.
Was this review help?
19
2
Share
More Forum Discussions

How to Handle the Violation of Making a Left Turn Where It Is Prohibited?

The enforcement department did not find any instances of running a red light or speeding. The party making the left turn failed to yield to the oncoming straight-moving vehicles and should bear the primary or full responsibility for the accident. A precise conclusion can only be drawn after an on-site investigation. If a car is moving straight and an electric vehicle makes a left turn, resulting in a collision, the car should bear secondary or no responsibility. Extended Information: Article 42: When driving on the road, motor vehicles must not exceed the maximum speed indicated by speed limit signs. On roads without speed limit signs, a safe speed should be maintained. When driving at night, in hazardous road sections, or under adverse weather conditions such as sandstorms, hail, rain, snow, fog, or icy roads, the driving speed should be reduced.
17
3
Share

What does 'nokey' displayed on the car mean?

When the car dashboard displays 'nokey,' it indicates the following situations: 1. Low key battery: In this case, simply press the start button with the remote key or place the key in a specific induction area to start the car. 2. Interference from in-car devices: Devices such as heads-up displays, navigation systems, tire pressure monitors, etc., installed in the car may interfere with the sensor receiving signals from the key. 3. Sensor malfunction: Generally, vehicles have key sensors located in areas such as the dashboard, under the center console, and under the rear seats. If these sensors malfunction or their connectors become loose, the vehicle may fail to detect the key. 4. Low vehicle battery: If the vehicle's battery is low, it cannot power the car's electrical devices, naturally making it unable to detect the remote key.
19
4
Share

At What Water Level is a Car Considered Flooded?

There are two levels of flood damage to a car. The first is when the water level reaches the height of the car's headlights, which is considered a partial flood. If the water level continues to rise, surpassing the hood and even covering the roof, this is considered a complete flood. Related Information: 1. Precautions: Both levels of flood damage are quite severe, with half or even the entire vehicle submerged in water. Unless the price is extremely low, it is not advisable to purchase such vehicles, as the subsequent repair costs can be very high. 2. Additional Information: A water-damaged car with minor flooding typically has water just covering the wheels, with the car's chassis completely submerged. This level is referred to as a water-damaged car. For such vehicles, as long as the chassis is not submerged for an extended period, the issues are not too severe. Later, anti-corrosion maintenance for the vehicle's chassis will suffice.
12
0
Share

Do LED headlights with fans require dust covers?

LED headlights with fans need to be equipped with dust covers. Universal dust covers can be used, which are designed to expose the heat dissipation or fan of the LED headlights. This not only solves the dust problem but also addresses heat dissipation, providing a better cooling environment. Automotive dust covers are protective gear used to prevent dust accumulation on vehicles. They are mainly installed in the steering mechanism and drive shaft parts, but are also widely distributed in other areas such as the handbrake, footbrake, throttle linkage, brake master cylinder, and wheel cylinders. Advantages of LED headlights with fans: Fan cooling is an active heat dissipation system with higher cooling efficiency. Due to fan cooling, the heat from the headlights can be distributed in time, lowering the temperature, which allows for increased brightness. Because of the fan cooling, the brightness of the new three-sided LED headlights will be very high.
4
2
Share

How to activate the Hyundai ix35 lock sound?

The method to set the lock sound for the Hyundai ix35 is to select the lock option in the vehicle's onboard computer settings. Below are relevant details about the Hyundai ix35: 1. Powertrain configuration: This vehicle offers two engine options - 2.0L and 2.4L. Both engines are brand-new Theta II generation dual CVVT all-aluminum structure four-cylinder gasoline engines, with no visible external differences between them. The 2.0L engine delivers maximum output power of 120kW/6200rpm and maximum torque of 194Nm/4600rpm; the 2.4L engine produces maximum output power of 128kW/6000rpm and maximum torque of 226Nm/4000rpm. 2. Exterior and interior design: The ix35 features distinct European styling with fashionable, avant-garde, rugged and dynamic elements. The interior design maintains this dynamic and stylish external character while striving to achieve top-class standards in functional configurations, such as panoramic sunroof, rearview mirror integrated reversing camera, and engine push-button start - all pioneering features in its class.
4
0
Share

What Causes the Hissing Sound at 2000 RPM When Accelerating?

The causes of abnormal noise at 2000 RPM when accelerating are as follows: 1. Unfiltered Air: The engine needs to intake a large amount of air during operation. If the air is not filtered, dust particles suspended in the air will be sucked into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe "cylinder scoring." The air filter, installed in front of the carburetor or intake pipe, serves to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders. 2. Clutch Issues: The compressed air flow noise generated by the turbocharger during operation. When the engine is revving or the accelerator pedal is pressed deeply, the engine noise becomes louder. When accelerating, press the pedal gently and avoid flooring it suddenly, as abruptly pressing it all the way down can produce this abnormal noise.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.