What transmission does the BYD Tang use?

1 Answers
PaulLynn
07/29/25 2:52pm
BYD Tang's transmission system uses a 6-speed DCT wet dual-clutch transmission, model BYD6DT35. It can be driven in either pure electric mode (EV) or hybrid mode (HEV). Below are the detailed specifications of the BYD Tang's transmission: 1. This wet dual-clutch transmission has the model number BYD6DT35, with a maximum torque capacity of 250N·m and a weight of 94kg. 2. It is a transmission independently developed by BYD. 3. Since the dual-clutch transmission is based on a manual transmission, it can operate in either manual or automatic shifting mode.
Was this review help?
2
0
Share
More Forum Discussions

Where is the body control module of BYD F0 located?

The body control module of BYD F0 is located under the driver's seat, in a square box. It can also be seen under the center of the instrument panel by removing the passenger side trim panel. Below is some relevant information about the body control module: 1. The Body Control Module (BCM) is a powerful control module designed to implement discrete control functions and manage numerous electrical appliances. 2. The communication tool of the body control module is the core of establishing trust between the machine and the user. 3. This module monitors and controls many aspects to ensure the smooth operation of critical electronic devices. A well-positioned software solution for the Body Control Module (BCM) can personalize the car for users and elevate safety and comfort to a new level.
1
3
Share

What are the pros and cons of Honda's ECON mode?

Honda's ECON mode primarily helps reduce vehicle fuel consumption, thereby saving on fuel costs to some extent. However, its drawbacks are also evident: improper usage can increase carbon deposits, leading to reduced engine power and shortened engine lifespan. Below are specific details about the ECON mode: 1. Correct Usage: Honda's ECON mode is suitable for slow driving, with optimal fuel efficiency achieved at around 60 km/h. Activating it when the fuel level drops to one-third remaining can enhance fuel-saving effects, so it's best to turn it on at this point. 2. Overview: Honda's ECON mode is a fuel-saving setting. Enabling this mode can reduce vehicle fuel consumption to a certain degree, helping save on fuel expenses.
5
0
Share

Why can't the Buick Excelle start?

The main reasons why the Buick Excelle cannot start are as follows: 1. Damaged spark plugs. Check the spark plugs to see if they are aged or have heavy carbon deposits, and replace them if necessary. 2. Poor contact in the high-voltage wires. Use a multimeter to test whether the resistance is normal. 3. Faulty ignition circuit. Use a multimeter to check for any open circuits. 4. The vehicle has been used for too long. Severe aging of components like fuel lines can cause insufficient fuel supply during startup, often leading to failure to start. Therefore, when starting, slightly press the accelerator to speed up the fuel circulation, making it easier to start.
16
4
Share

How to Open the Trunk of Volkswagen Tharu?

There are several methods to open the trunk of Volkswagen vehicles: 1. Gently lift the trunk button to open it. 2. Unlock the trunk using the car key. Many models allow direct trunk unlocking by pressing the trunk unlock button on the key. 3. If the key is within the sensing range, you can directly pull the trunk handle to lift the trunk lid. Additional information: For cars equipped with a trunk lid lock cylinder, the opening method is: Pull out the key in a horizontal position, at which point the central locking system cannot control the trunk, and the trunk remains locked. Turn the key back to the vertical position to restore central locking control, allowing the trunk to be opened.
14
4
Share

What Causes the Hissing Sound When Turning the Steering Wheel to Full Lock?

The reason for the hissing sound when turning the steering wheel to full lock is a damaged power steering pump. The specific causes and solutions are as follows: Specific causes of the hissing sound when turning the steering wheel to full lock: When the pressure check valve of the power steering pump wears out, it fails to seal properly during the return of air. This results in a hissing sound when turning the steering wheel at large angles, and the steering effort may feel heavier than usual. Solutions for the hissing sound when turning the steering wheel to full lock: The power steering pump cannot be repaired. If the symptoms become severe, making the steering feel very heavy, it is necessary to replace the power steering pump.
19
5
Share

What Causes a Motorcycle to Make a Buzzing Sound but Not Start?

There are several reasons why a motorcycle may make a buzzing sound but fail to start: 1. The battery is old or dead. If the motorcycle doesn't start after two or three attempts, check the battery for issues. 2. In winter, low temperatures may prevent the engine from warming up properly. When starting a cold motorcycle in winter, turn the choke to the highest position, and after about 15 seconds, adjust it to the middle position to allow the motorcycle to warm up. 3. Spark plug failure, which can occur due to prolonged use leading to degraded performance. 4. Check if there is gasoline in the fuel tank. 5. Low temperatures can cause the motorcycle's engine oil to become more viscous, and in extreme cases, the oil may even solidify into clumps.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.