What transmission does the Buick Regal use?

1 Answers
MacElle
07/29/25 9:04am
Buick Regal uses a 9-speed HYDRA-MATIC intelligent transmission. More information about the Buick Regal is as follows: 1. The Buick Regal belongs to Buick's mid-to-high-end sedan series, featuring a contemporary exterior design, humanized refined interior, and luxurious high-tech configurations. 2. The 9-speed Hydra-Matic intelligent transmission equipped in the Buick Regal incorporates over 60 General Motors patented technologies, including a newly designed selectable one-way clutch, torque converter, start-stop hydraulic accumulator, external TCM control module, and a coaxial design that enables it to maintain a compact size comparable to 6AT transmissions. It has a compact structure and efficient power transmission. The gear ratio distribution of the 9 forward gears is dense and reasonable, with an overall gear ratio range reaching a wide 7.6:1. Combined with the setting of 2 overdrive gears, it can significantly reduce engine speed during high-speed cruising, improving fuel efficiency.
Was this review help?
7
4
Share
More Forum Discussions

Does the Electronic Parking Brake Act on the Front or Rear Wheels?

Electronic parking brakes act on the rear wheels. Here is more information about electronic parking brakes: 1. The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both of which use the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. The electronic parking brake has evolved from the basic parking function to an automatic parking function. The application of the automatic parking function technology allows drivers to avoid prolonged braking when the vehicle is stopped. When the automatic electronic parking brake is activated, it can prevent unnecessary vehicle sliding.
6
3
Share

Is It Useful to Only Discuss the On-the-Road Price When Buying a Car?

It is useful to only discuss the on-the-road price when buying a car. The on-the-road price truly reflects the actual cost of purchasing a car, so it is ultimately the price to focus on. However, the on-the-road price includes the ex-factory price, so generally, the ex-factory price is negotiated first. Only after determining the ex-factory price can the on-the-road price be known. Additionally, there are too many variable factors in the on-the-road price, and only after settling the ex-factory price can one clearly understand whether other charges are reasonable. Below are the differences between the ex-factory price and the on-the-road price: 1. The ex-factory price can be understood as the actual market price of the vehicle. 2. The on-the-road price refers to the total cost of purchasing a car, which includes not only the ex-factory price but also purchase tax, insurance fees, registration fees, vehicle decoration fees, financial service fees, loan interest, etc.
16
2
Share

What Issues Should Be Noted for a New Car?

Before driving, it is necessary to warm up the engine, and the lubrication time should be at least one minute or more. Other precautions: 1. Avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. 2. Avoid overloading: Running a new car at full load during the break-in period can cause damage to the components. 3. Avoid high-speed driving: There should be speed limits, and pay attention to the engine tachometer and speedometer while driving. 4. Avoid changing the oil too early: The initial oil in a car is a special lubricant for the break-in period, which requires low viscosity, good heat dissipation, excellent cleaning, and antioxidant properties. Change the oil according to the manufacturer's specified time.
12
0
Share

Where is the cabin air filter of Dongfeng Fengshen S30 located?

Dongfeng Fengshen S30's cabin air filter is located beneath the glove compartment on the passenger side. There is a soft panel in that area, with three self-tapping screws on the innermost side towards the seat direction. After removing these screws, gently pry open the cover panel downwards. By inserting your head inside and looking upwards, you can see the cabin air filter. The technical name for the cabin air filter is "automobile cabin air cleaner," which is a specialized filter used for air purification inside the vehicle cabin. The functions of the cabin air filter are as follows: 1. The most important function of the cabin air filter is to filter out dust from the air, preventing dust from entering the evaporator and forming sludge that could clog it. If there is a noticeable reduction in the airflow from the vents, it indicates a blockage. 2. Another function is air purification. The cabin air filter typically contains activated carbon, which can absorb some harmful gases from the air. It is advisable to replace the cabin air filter regularly for the benefit of human health.
11
0
Share

What is the correct way to start the Lynk & Co 03?

Lynk & Co 03 correct starting method: First, press the brake pedal, then press the one-touch start button to ignite the vehicle, shift to D gear, and directly press the accelerator. The vehicle will automatically release the electronic parking brake while accelerating. When parking, after the vehicle comes to a complete stop, shift to P gear for parking. The vehicle will automatically engage the electronic parking brake. Release the brake and turn off the power without manually pulling the electronic parking brake. Below is an introduction to the model: The Lynk & Co 03 adopts a cockpit-style design similar to the 02, overall leaning towards the driver's side. It comes standard with a 10.25-inch full LCD instrument panel and a 10.2-inch central control screen that supports smartphone connectivity and internet functions. The Lynk & Co 03 is built on the global CMA architecture jointly developed by Geely and Volvo, featuring a family-style design language for both its exterior and interior, positioning it as a compact sports sedan.
11
1
Share

What is the actual fuel consumption of the Mazda6 Atenza 2.0 coupe?

According to the comprehensive fuel consumption data released by the Ministry of Industry and Information Technology, the Mazda6 Atenza 2.0 coupe has a combined fuel consumption of 8.2L per 100km. Here are some details about this model: 1. Dimensions: The Mazda6 Atenza measures 4755*1795*1440mm (L*W*H). 2. Powertrain: The entire Mazda6 Atenza lineup is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 147hp, maximum power of 108kw, and maximum torque of 184N·m. Mazda also offers a 2.5L naturally aspirated engine option with 169hp maximum horsepower, 124kw maximum power, and 226N·m maximum torque. 3. Transmission: All Mazda6 Atenza models come with a 5-speed automatic transmission with manual shift mode.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.