What transmission does the Buick Envision use?

1 Answers
VonJourney
07/30/25 3:52am
Buick Envision uses a 7-speed dual-clutch transmission and a 9-speed automatic manual transmission. The 7-speed dual-clutch transmission is a dry dual-clutch transmission independently developed by General Motors, but the performance of this dual-clutch transmission is relatively poor, with more noticeable jerks during gear shifts, and a common issue is the higher operating temperature of the transmission. All currently available Buick Envision models meet the China VI emission standards and are divided into two-wheel drive and four-wheel drive versions. The four-wheel drive version adopts a front-engine, front-wheel-drive layout with full-time four-wheel drive and a multi-plate clutch central differential. The dimensions of the currently available Buick Envision models are 4686mm in length, 1839mm in width, 1686mm in height, with a wheelbase of 2750mm.
Was this review help?
13
5
Share
More Forum Discussions

Where is the engine number of a GMC vehicle?

The engine number of a GMC vehicle is located in the engine compartment, near the oil filter with a blue plug. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked in the following 4 ways: The vehicle's driving license has the engine number printed, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number, however, refers to the production number of the engine. Each engine can only have one engine number, and the number of each engine is unique.
18
1
Share

What is the M-NV car?

Automobile Dongfeng Honda M-NV model is as follows: The Dongfeng Honda M-NV is a vehicle produced by Dongfeng Honda Automobile Co., Ltd., a joint venture established on July 16, 2003, with Dongfeng Motor Group Co., Ltd. holding a 50% stake, Honda R&D (China) Investment Co., Ltd. holding 10%, and Honda Motor Co., Ltd. of Japan holding 40%. Honda M-NV: The body dimensions are 4324 mm in length, 1785 mm in width, and 1637 mm in height, with a wheelbase of 2610 mm. It is equipped with a front-mounted electric motor, making it a front-wheel-drive vehicle. The maximum power output is 120 kW, and the maximum torque is 280 Nm. The car features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It uses a ternary lithium-ion battery and is equipped with a high-precision intelligent temperature control system, front-end anti-collision beams, and an H-shaped anti-collision beam with a body energy-absorbing structure. Advantages: Excellent space and handling, dynamic control, efficient and safe three-electric system, and more.
18
5
Share

Why is the 9-digit engine number only showing 6 digits?

There are 3 English letters at the beginning, representing the engine model. The vehicle engine number can be found on the engine block or on the vehicle registration certificate. Here is relevant information: 1. Engine number: The engine model is marked by the manufacturer according to relevant regulations or industry practices to indicate engine-related information. This includes the engine's manufacturer, specifications, performance, features, technology, purpose, and production batch. 2. Composition: It consists of 17 digits and letters. Based on the principle of permutation and combination, it will not repeat within 30 years. Its function is to effectively identify the vehicle, and this set of numbers is required for procedures such as vehicle transfer registration.
17
4
Share

Where is the engine number of GMC commercial vehicle?

gmc commercial vehicle engine number is located in the engine compartment, near the oil filter there is a blue plug, usually a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle driving license has the engine number printed on it, usually located on the second last line; The motor vehicle registration certificate will state the engine number; The purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not equal to the engine model. The engine model refers to the specification and size of the engine in the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is different.
10
5
Share

What causes a sudden increase in fuel consumption for the 18t Magotan?

The reasons for a sudden increase in fuel consumption for the 18t Magotan: 1. Oxygen sensor malfunction: If the increase in fuel consumption is not due to poor driving habits, it is advisable to check whether the car's oxygen sensor is damaged or malfunctioning. In case of a malfunction, the oxygen sensor fails to function properly, leading to incorrect feedback on the car's exhaust emissions, such as incomplete fuel combustion or insufficient power output. This causes the car's computer to collect erroneous data, resulting in a decision to increase fuel injection, which over time leads to progressively higher fuel consumption. If the oxygen sensor is faulty, it can be cleaned or replaced with a new one. 2. Spark plug malfunction: Under normal circumstances, the fuel consumption for a regular SUV is around 10 liters per 100 kilometers. If there is a sudden increase, it is recommended to check whether the spark plugs are malfunctioning. Carbon buildup on the spark plugs can cause smaller ignition flames or delayed ignition, leading to increased fuel injection and higher fuel consumption. 3. Charcoal canister malfunction: Another possibility is that the car's charcoal canister solenoid valve is malfunctioning. It is recommended to take the car to a 4S shop for inspection and replace the charcoal canister, which should resolve the issue of high fuel consumption.
13
3
Share

Can 9-Speed Transmission Use 8-Speed Transmission Fluid?

Automotive transmissions can be divided into manual transmissions and automatic transmissions based on their control methods. Common automatic transmissions mainly include four types: Automated Manual Transmission (AMT), Hydraulic Automatic Transmission (AT), Continuously Variable Transmission (CVT), and Dual-Clutch Transmission (DSG). Below are their structures and working principles: 1. Structure and Working Principle of Manual Transmission: A manual transmission mainly consists of a housing, transmission components (input/output shafts, gear synchronizers, etc.), and control components (shift levers, shift forks, etc.). By moving the gear lever, the driving gears on the intermediate shaft are switched, and different gear combinations engage with the power output shaft to change the torque and speed of the driving wheels. 2. Structure and Working Principle of Hydraulic Automatic Transmission: A torque converter generally consists of a pump impeller, stator, turbine, and lock-up clutch. The transmission is filled with transmission fluid. When the pump impeller, connected to the power input shaft, rotates, it drives the turbine, connected to the output shaft, to rotate together through the transmission fluid, thereby transmitting the engine power. 3. Structure and Working Principle of Continuously Variable Transmission: The main components of a CVT are two pulleys and a metal belt. The metal belt is looped around the two pulleys. Each pulley consists of two discs, with a V-shaped groove formed between them. One of the discs is controlled by a hydraulic mechanism, allowing it to move apart or closer depending on the engine speed. The V-shaped groove thus widens or narrows, raising or lowering the metal belt, which changes the contact diameter of the belt with the pulley, effectively simulating gear shifts by switching gears of different diameters. 4. Structure and Working Principle of Dual-Clutch Transmission: Two clutches are assembled within the same mechanism as the transmission. One clutch is responsible for gears 1, 3, 5, and reverse, while the other handles gears 2, 4, and 6. When the driver engages 1st gear to start, the shift fork simultaneously engages 1st and 2nd gears, but clutch 1 is engaged while clutch 2 is disengaged, so power is transmitted through the 1st gear, and the 2nd gear idles. When shifting to 2nd gear, the shift fork simultaneously engages 2nd and 3rd gears, clutch 1 disengages while clutch 2 engages, transmitting power through the 2nd gear, and the 3rd gear idles.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.