What transmission does the BMW M4 use?

Is the Audi A4L China 6a or 6b?

Audi A4L currently has China 5 and China 6 standard models on sale, and there is no further subdivision into China 6A or 6B yet. Introduction to China 6A and 6B: Currently, the country divides the China 6 standard into two phases, China 6a and China 6b, with plans to implement them nationwide in 2020 and 2023, respectively. On July 1st of this year, some cities have already started implementing the China 6 standard. Introduction to the Audi A4L: As an entry-level Audi model, the Audi A4L performs quite balanced overall. After all, it is designed for the masses, and only by being more balanced can it meet the different needs of various consumers as much as possible, catering to those who prefer the golden mean.

8

2

Share

What Does the Second Maintenance of a Vehicle Include?

Car second maintenance includes the following items: 1. After the engine undergoes the three-clean and three-filter operations, it should start easily, run smoothly, have normal exhaust (meaning the tail gas meets standards), with water temperature and oil pressure meeting requirements, stable speed, no abnormal noises, proper tension of all belts, and no leaks (water, oil, electricity, or gas). 2. The steering free travel and toe-in should meet requirements, with steering being light, flexible, and reliable. The front wheels should not wobble left and right or pull to one side while driving. 3. The clutch free travel should meet requirements, with operation being convenient, separation thorough, engagement smooth and reliable, no abnormal noises, and no oil leaks in the hydraulic system. 4. The transmission, drive axle, universal joint (or half-shaft) transmission device, etc., should be well lubricated, with reliable connections, no abnormal noises or overheating, no gear jumping, flexible gear shifting, and no oil leaks. 5. The brake pedal free travel and brake clearance should meet requirements, with driving and parking brakes functioning well, no pulling to one side or dragging during braking, the inertia proportion valve working normally, and no oil leaks. 6. Tire pressure should be normal (different vehicle models have different high and low pressure standards). 7. The suspension arms and shock absorbers should be fixed reliably, functioning normally, with the wheel hub bearing temperature not overheating after driving. 8. The generator, starter, lights, instruments, signal lights, buttons, switches, and other auxiliary equipment should be complete and intact, functioning normally. 9. All lubrication points of the vehicle should be filled with lubricating oil. 10. The entire vehicle should be washed and cleaned.

12

2

Share

What brand is Comfort tires?

Comfort is a series of tires under the Giti brand. The Comfort series can serve small car models, including three products: Comfort 220, Comfort 221, and Comfort 228, with a focus on comfort and quietness. Giti Tires is a Singaporean company that entered China in 1993 and has sales subsidiaries or offices in the United States, Canada, Germany, the United Kingdom, France, Indonesia, and Brazil. It is one of the many tire manufacturers worldwide. Giti provides tires that meet the needs of various vehicle types, including sedans, SUVs, off-road vehicles, racing cars, light trucks, light buses, trucks, buses, construction machinery, and agricultural machinery. When using Comfort tires daily, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves of the tires gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may become potential hazards for tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear. Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure will increase. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool down, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden stops to prevent accelerated tread wear caused by dragging between the tires and the ground.

15

0

Share

What are the gear positions in a sedan?

Generally, the gear positions on an automatic transmission car are: P (Park), R (Reverse), N (Neutral), D (Drive), D1; 2; 3; M+; -; (Limited gears), L (Low gear), and S (Sport mode). Manual transmissions have first gear, second gear, third gear, fourth gear, and fifth gear. Automatic transmission car gear positions: How to use P gear: When the vehicle needs to be parked for a long time, especially on a slope, switch to P gear. At this time, the wheels are mechanically locked, ensuring the vehicle cannot move while stationary. How to use R gear: When shifting into reverse gear, some vehicles require pressing the safety button on the gear shift to move the gear lever to R. N gear can be used when starting the vehicle or when towing, as well as while waiting at signals, in traffic jams, or for brief stops. When shifting into N gear, always engage the handbrake. On slopes, also apply the foot brake to prevent rolling. How to use D gear: When preparing to start driving, press the brake, shift the gear lever to D, release the handbrake, then release the brake and press the accelerator to move. Continue pressing the accelerator as needed for speed, and the car will automatically shift between gears 1 to 4 based on speed. L gear: Low gear is used on icy roads or in heavy traffic. Shifting to L ensures the vehicle stays in first or second gear, avoiding increased fuel consumption and wear. S gear: In this mode, the transmission can shift freely, but the shift timing is delayed, keeping the engine at high RPM for longer to deliver greater torque and enhance vehicle power. Other gears may perform slightly worse. M gear: This is the manual mode for automatic transmission cars. In M gear, drivers can enjoy the fun of manual shifting. The main operations involve the "+" and "-" symbols near the gear lever; "+" means upshift, and "-" means downshift. Manual transmission car: First gear is the starting gear, used when the car begins moving from a stop. Once the car starts moving, shift to second gear. Second gear is the driving gear for low-speed driving, suitable for very slow speeds, not high-speed driving. Third gear is the acceleration gear, allowing the driver to press the accelerator to increase speed to a certain level. Fourth gear is for medium-high-speed driving, typically used in urban areas (excluding elevated roads), with speeds usually around 60-70 km/h. Fifth gear is the high-speed gear, used mainly on elevated roads or highways, generally at speeds of 80 km/h or above. R gear is the reverse gear, used when backing up.

10

2

Share

Will an A2 driver's license be downgraded after accumulating 12 penalty points?

An A2 license will not be downgraded after receiving 12 penalty points. According to the new regulations implemented on April 1, 2022, A2 license holders who accumulate 12 penalty points within a scoring cycle will no longer face downgrading. Instead, the driver needs to participate in Subject 1 study and examination to clear the penalty points and retrieve their license. The A2 license allows driving tractor-trailers, which can tow heavy-duty and medium-duty full trailers/semi-trailers. Trailers are divided into two types: full trailers and semi-trailers. A full trailer bears its total weight independently, while a semi-trailer shares part of its total weight with the towing vehicle. Only drivers holding an A2 license can operate such tractor-trailers; even those with an A1 license cannot drive them. To downgrade an A2 license, visit the local vehicle management office with your ID card and driver's license. Downgrading an A2 license will result in a B1 or B2 license. The A2 license corresponds to tractor-trailers, the B1 license to medium-sized passenger vehicles, and the B2 license to large trucks. Other vehicle types that an A2 license holder can drive include: B1 (medium-sized passenger vehicles), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). Article 68 of the new traffic regulations states that drivers holding licenses for large buses, tractor-trailers, city buses, medium-sized passenger vehicles, or large trucks will have their highest-level driving qualification revoked under the following circumstances, and they must apply for a downgrade within 30 days: Being involved in a traffic accident resulting in death and bearing equal or greater responsibility, without constituting a crime. Accumulating 12 penalty points within a scoring cycle. Failing to undergo inspection for three consecutive scoring cycles. A driver's license, officially known as a motor vehicle driving license or simply "license," is a legally required document for operating motor vehicles. Driving a motor vehicle requires specific skills. Without these skills, driving recklessly may lead to accidents, which is why unlicensed individuals are not allowed on the road. For those who have mastered safe driving techniques, the document permitting them to drive is the "driver's license." Permission to drive is granted through the issuance of a driver's license. This indicates that obtaining a license is a formal procedure requiring approval from specialized authorities. Internationally, a driver's license is defined as: "a document issued by competent authorities permitting the holder to drive a motor vehicle." In China, a driver's license is defined as: a legal certificate issued by administrative authorities to individuals who have learned and mastered traffic regulations and driving skills, allowing them to operate specific types of motor vehicles.

4

3

Share

Is a Major Maintenance at 60,000 Kilometers Mandatory for Audi?

Audi vehicles require a major maintenance service at 60,000 kilometers; otherwise, various degrees of wear and tear may occur in different parts of the car, especially the transmission fluid, which tends to oxidize and degrade by this mileage and needs replacement. Introduction to Car Maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. Maintenance Content: Modern car maintenance primarily includes the care of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more.

19

3

Share

What transmission does the BMW M4 use?

Is the Audi A4L China 6a or 6b?

What Does the Second Maintenance of a Vehicle Include?

What brand is Comfort tires?

What are the gear positions in a sedan?

Will an A2 driver's license be downgraded after accumulating 12 penalty points?

Is a Major Maintenance at 60,000 Kilometers Mandatory for Audi?

What brand of tires does the Roewe RX5 use?

How many liters of engine oil does the Cayenne require?

What is the ground clearance of the Chery Tiggo 5x?

How to Open the Fuel Tank Cap on a MINI Cooper?