What transmission does the BMW 1 Series use?

What is the load capacity of the Corolla in tons?

The weight of the Corolla is approximately 1.2 tons, and when fully loaded, it is around 1.77 tons. Here is some information about the Corolla: 1. The Corolla's body structure is a 4-door, 5-seater sedan, with body dimensions of 4635mm in length, 1780mm in width, and 1455mm in height. The wheelbase is 2700mm, and the minimum ground clearance is 152mm. 2. The Corolla's front suspension is a MacPherson strut independent suspension, and the rear suspension is an E-type multi-link independent suspension. The Corolla is equipped with a 1.2L turbocharged engine, with a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 185Nm. It is paired with a 10-speed continuously variable transmission.

6

0

Share

How to Use ESP Correctly?

ESP is correctly used by default in vehicles equipped with it after starting the car. The ESP OFF button is rarely used during daily driving and is only pressed under specific circumstances. Situations requiring the deactivation of the ESP function are as follows: 1. Sand or muddy roads: When driving on sand or muddy roads, the wheel traction decreases. If the wheels slip, ESP will limit the engine's RPM, making it difficult for the car to escape if stuck in mud, thus requiring the ESP system to be turned off. 2. Climbing on icy or slippery roads: When climbing on icy or slippery roads, if slipping occurs, the ESP system reduces engine torque, leading to insufficient climbing power, necessitating the deactivation of the ESP system. 3. Drifting: Drifting enthusiasts also need to turn off the ESP system when performing drift maneuvers, as the wheels slip most of the time during drifting. Not turning it off would hinder the execution of drift maneuvers.

5

1

Share

Is Vacuuming Necessary Before Recharging Car Air Conditioning with Refrigerant?

If it's just a refrigerant top-up, vacuuming is not required; however, if refrigerant needs to be added or replaced due to leakage, vacuuming is essential. The specific steps for recharging car air conditioning with refrigerant are as follows: 1. Preparation: Before adding refrigerant, prepare tools and materials such as a car refrigerant recovery and charging machine and refrigerant (most car air conditioners currently use R-134a refrigerant, and different refrigerants must never be mixed). 2. Connecting the Pipes: Connect the pipes of the car refrigerant recovery and charging machine to the high and low-pressure pipes of the car air conditioning (red connects to the high-pressure pipe, blue to the low-pressure pipe). 3. Vacuuming: After ensuring the pipes are correctly connected and the refrigerant recovery and charging machine has completed its self-check, proceed to vacuum the car air conditioning system. 4. Adding Refrigerant: Only after vacuuming is completed can refrigerant be added. Set the charging capacity, time, and type on the refrigerant recovery and charging machine according to the maximum refrigerant capacity marked on the vehicle's air conditioning system. Once confirmed, the machine will automatically start adding the refrigerant.

3

1

Share

How to Remove the Rear Seats of the Ford Kuga?

Ford Kuga rear seat cushion removal method is as follows: 1. Prepare a 12mm T-handle screwdriver or socket wrench, insert it into the middle position between the two rear seats, and remove the two screws; 2. Locate the two clips under the seat cushion and push them toward the backrest, at which point the seat cushion can be lifted; 3. Use the same screwdriver to remove the four exposed screws under the backrest, then lift the backrest upward with force until a "click" sound indicates successful removal. The Ford Kuga's biggest highlight lies in its configuration, particularly in safety features, which include standard curve-intelligent torque distribution, electronic stability program (ESP), front dual airbags, knee airbags, HSA hill start assist, and other mainstream configurations. Some higher-end models also feature lane-keeping assist and automatic parking systems, surpassing other models in the same class with these standout configurations.

8

4

Share

Is the AC light on the car air conditioner indicating hot or cold air?

AC button is the switch to control the air conditioning compressor. When the light is on, it means the compressor is activated, and cold air is being blown into the car. Generally, in summer, when you turn on the air conditioner and press the AC button, it will start cooling. Here are some related introductions: 1. In winter or rainy seasons when the outside temperature is low, when the owner turns on the warm air in the car, do not press the AC button. This not only fails to provide warmth but also increases fuel consumption, because the warm air only utilizes the heat generated by the engine, while the operation of the air conditioning compressor consumes fuel. 2. In winter, both cold and hot air can achieve the effect of eliminating fog. To use cold air, press the AC button to reduce the temperature difference inside and outside the car, thereby removing the fog on the windshield. This method is faster, but the driver may feel cold. Using hot air to remove fog takes longer, but it can prevent fog from forming again.

8

0

Share

What is the 0-100 km/h acceleration time of the Mazda CX-4?

According to official data, the Mazda CX-4 comes with two engine displacements: 2.0L and 2.5L. The 2.0L version accelerates from 0-100 km/h in 10.5 seconds, while the 2.5L version does it in 9.5 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force the engine can produce. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Mazda 2.5L engine has a maximum torque of 252 Nm, achieving 0-100 km/h in 9.5 seconds. The Mazda CX-4 2.0L has a maximum torque of 202 Nm, with a 0-100 km/h time of 10.5 seconds. Transmission efficiency: The transmission acts as the medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Mazda CX-4 is equipped with a 6-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Mazda 2.5L has a power-to-weight ratio of 125 Hp/T, achieving 0-100 km/h in 9.5 seconds. The Mazda CX-4 2.0L has a power-to-weight ratio of 106 Hp/T, with a 0-100 km/h time of 10.5 seconds.

7

3

Share

What transmission does the BMW 1 Series use?

What is the load capacity of the Corolla in tons?

How to Use ESP Correctly?

Is Vacuuming Necessary Before Recharging Car Air Conditioning with Refrigerant?

How to Remove the Rear Seats of the Ford Kuga?

Is the AC light on the car air conditioner indicating hot or cold air?

What is the 0-100 km/h acceleration time of the Mazda CX-4?

What Causes the Noise After Replacing Brake Pads?

What is the fuel tank capacity of the Cadillac CT5?

What is the problem when the differential is broken?

What Causes the Battery Warning Light to Illuminate in a Car?