What transmission does the Beijing Hyundai Elantra use?

1 Answers
ChristopherAnn
07/25/25 12:09am
The Hyundai Elantra is equipped with 1.5T and 1.4T engines. The former is matched with a 6-speed manual or continuously variable transmission, while the latter is paired with a 7-speed dual-clutch transmission. Automotive transmissions serve the following functions: 1. Change the transmission ratio to expand the variation range of driving wheel torque and speed, adapting to frequently changing driving conditions while allowing the engine to operate under favorable conditions (higher power and lower fuel consumption); 2. Enable the vehicle to reverse while maintaining the same engine rotation direction; 3. Utilize neutral gear to interrupt power transmission, allowing the engine to start, shift, and facilitating gear changes or power output in the transmission.
Was this review help?
13
5
Share
More Forum Discussions

What are the differences between the Baojun 360 and 730?

Baojun 360 and 730 are two models under the Baojun brand, an independent automobile brand established by SAIC-GM-Wuling in 2010. The differences between the two are as follows: 1. Different appearances. The Baojun 360 overall looks more youthful and stylish than the 730, featuring a hexagonal grille with multiple decorative strips connecting the logo. The Baojun 730 has two decorative strips connecting the Baojun emblem in the middle of the front grille, and its front design appears slightly lower, giving a more fashionable and stable impression. 2. Different configurations. The Baojun 730 offers many more features than the 360, such as electronic parking, multiple airbags, cruise control, 360-degree panoramic imaging, automatic parking, one-button start, GPS navigation, automatic mirror folding, and multi-link independent suspension. 3. Different powertrains. The Baojun 360 has a relatively simple powertrain, equipped only with a 1.5L naturally aspirated engine paired with a 6-speed manual or 5-speed AMT transmission. The Baojun 730 offers three powertrain options: 1.5L/1.8L naturally aspirated engines and a 1.5T turbocharged engine, paired with 5/6-speed manual, 5-speed AMT, or 6-speed dual-clutch transmissions.
11
0
Share

Is there a domestic version of the Mazda 5?

The Mazda 5 does have a domestic version, which is the Mazda CX-5, a compact SUV produced by Changan Mazda. Here are some parameters and configurations of the Mazda CX-5: 1. In terms of body dimensions, the Mazda CX-5 measures 4555mm in length, 1842mm in width, and 1685mm in height; 2. For power, the Mazda CX-5 is equipped with a 2.0L naturally aspirated engine and a 2.5L naturally aspirated engine; 3. In terms of transmission, the Mazda CX-5 offers a 6-speed manual and a 6-speed automatic transmission; 4. For suspension type, the Mazda CX-5 features a front MacPherson independent suspension and a rear multi-link independent suspension; 5. In terms of features, the Mazda CX-5 comes standard with tire pressure monitoring, brake assist, front and rear parking radar, auto hold, hill start assist, a color trip computer, USB and AUX interfaces, headlights, headlight delay-off, one-touch power windows, power-folding exterior mirrors, and automatic air conditioning.
17
3
Share

How many liters can the Mazda 6 fuel tank hold?

Mazda 6 has a fuel tank capacity of 64 liters, which is the officially announced data. The Mazda 6 uses 92-octane gasoline, with a fuel consumption of 7.8 to 8.2L per 100 kilometers. A full tank can provide a driving range of 760 to 820km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is generally observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated fuel tank capacity.
8
1
Share

How Many Years Can a Pure Electric Vehicle Battery Last?

The battery can last for about 6-8 years without issues. Here is some relevant information about the battery: 1. Battery: The battery, also known as a storage battery, is a device that converts chemical energy into electrical energy. It refers to a lead-acid battery, which is primarily made of lead and its oxides, with sulfuric acid solution as the electrolyte. The normal lifespan of a car battery ranges from 1 to 8 years, depending largely on the vehicle's usage. 2. Battery Replacement: If the battery is dead, it is recommended to first measure the battery voltage. If using a multimeter, measure the battery voltage during engine cranking. You can initially use a high-frequency discharger or a battery tester to measure it. Under a load current of no less than 110 amps, the minimum voltage should not be lower than 9.6 volts and should remain stable for 5 seconds. If the voltage is below 9.6 volts but can remain stable for 5 seconds, it indicates over-discharge, and the battery should be recharged promptly. If the voltage is below 9.6 volts and cannot remain stable within 5 seconds, dropping rapidly to 0 volts or close to 0 volts, it suggests a battery fault, and replacement may be necessary.
2
3
Share

What brand of tires does the Mercedes-Benz E300L use?

The Mercedes-Benz E300L uses Bridgestone's TURANZA run-flat tires, with the original tire model being 245/45R18. Below is some relevant information about the Mercedes-Benz E-Class: 1. The Mercedes-Benz E-Class is a mid-to-high-end model in the Mercedes-Benz series, designed with the new Mercedes-Benz S-Class as its inspiration, leading many owners to refer to the new E-Class as a "mini S-Class." 2. To meet the diverse needs of consumers, the Mercedes-Benz E-Class offers a sporty grille, a sedan-style grille, long-wheelbase models, and standard-wheelbase models. The long-wheelbase models, in particular, align well with Chinese consumers' preferences and aesthetic views on cars. 3. The most notable highlight of the new-generation Mercedes-Benz E-Class is its interior design. Moving away from the extensive use of straight lines in older models, the new interior presents a more three-dimensional and luxurious center console effect, which is a key reason many owners favor Mercedes-Benz vehicles. 4. In terms of powertrain, the car's previous 2.0T low-power engine (coded M274) has been replaced by a 1.5T engine with a 48V mild hybrid system. 5. For transmission, it is paired with a 9-speed automatic transmission, available in both four-wheel-drive and two-wheel-drive configurations. The engine delivers a maximum power of 135 kW and a maximum torque of 160 Nm. Thanks to the kinetic energy recovery system, it further enhances fuel efficiency and reduces fuel consumption.
17
0
Share

What type of oil does the Baojun 510 use?

The original factory oil specification for the Baojun 510 is SM/GF-4 5w-30. According to the official maintenance manual, the Baojun 510 requires SM-grade oil with a viscosity rating of 5w-30. The viscosity of engine oil changes with temperature, so it's important to pay special attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Baojun 510 is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passages to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover's oil filler port, typically filling about three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.